active-copper-jug

Active Copper™

Active Copper™ is a foliar-applied copper and sulfur fertiliser solution that can alleviate nutrient deficiencies in crops.

Category: Tags: , , ,

Description

The copper in Active Copper™ supports photosynthesis, structural strength, respiration, enzymatic processes, pollen virility, carbohydrate and protein metabolism.

When to Use

As indicated by soil analysis, throughout the growing cycle. Copper is not readily mobile within the plant, so must be continuously available, although in small amounts. Too much copper in the soil is harmful, so soil analysis testing is necessary.

For the best results, use the complete line of recommended Active AgriScience™ products for your crop.

Benefits

The availability and sufficiency of copper in the soil is essential to strong, healthy growth and high yields. Copper supports photosynthesis, structural strength, respiration, enzymatic processes, pollen virility, carbohydrate and protein metabolism, as well as the flavour of fruit.

Although micronutrients are needed in smaller quantities than primary and secondary nutrients, they are essential for strong, healthy growth and high yields. Insufficiency of micronutrients in the soil can limit growth, even when all other nutrients are present in adequate amounts. Active Copper™ is a foliar applied micronutrient for fast correction of micronutrient deficiencies. Also for use in blended fertilisers.

Active Copper Supports:

  • Photosynthesis
  • Structural strength
  • Respiration
  • Enzymatic processes
  • Pollen virility
  • Flavour of fruits
  • Carbohydrate & protein metabolism

Label

8.3% Cu  3.3% S

HELPS CORRECT COPPER DEFICIENCIES

DIRECTIONS FOR USE:

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.
Apply at the rate of 1.25 L / ha with a minimum of 100 L of water / ha. Ensure sufficient water for thorough coverage. Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilisers. Suitable for ground or aerial spraying.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: Compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used.

Add tank mix components in the following order: Water, Agrochemical, Active COPPER™. Keep agitator running while mixing and spraying.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

ANALYSIS (W/V%):

  • Copper (Cu) (actual): 8.3%
  • Sulfur (S): 3.3%
Harmful irritant Harmful or Fatal

DANGER HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. TOXIC IF SWALLOWED.

CAUTION: This fertiliser contains copper and should be used only as recommended. It may prove harmful when misused.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of contents/container in accordance with Federal, provincial and local regulations.

FOR CHEMICAL EMERGENCY: Call +1800 039 008 and refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Net weight:
12.0 kg

Net contents:
10 L

Compatibility

Compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used.

COMPATIBLE ✓
CAUTION !
NOT COMPATIBLE ✘
NOT TESTED ?
Active COPPER with Active AgriScience Products
Active PRIME ✓
Active BUILD ✓
Active FLOWER ✓
Active COMPLETE ✓
Active KONNECT ✓
Proform N ✓
Active BORON ✓
Active COPPER ✓
Active MANGANESE ✓
Active ZINC ✓

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER Active Copper
PRODUCT USE Agricultural fertiliser
MANFACTURERS NAME Active Agriscience Australia Pty Ltd.
ADDRESS 11 Stenton Corner Leeming WA 6149, Australia
DATE Feb. 13, 2024
EMERGENCY TELEPHONE +1800 039 008
PREPARED BY Active AgriScience Inc.
USE RESTRICTIONS For professional use only. Use only as labeled.
SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION
HPR (WHMIS 2015) Acute Toxicity Oral: Category 3
Eye Damage / Irritation: Category 2A
Skin Corrosion / Irritation: Category 2
OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute Toxicity Oral: Category 3
Eye Damage / Irritation: Category 2A
Skin Corrosion / Irritation: Category 2
WHMIS Harmful/irritant
WHMIS Toxic
DANGER		 HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. TOXIC IF SWALLOWED.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
INGREDIENTS CAS# CONCENTRATION
Copper sulphate Pentahydrate 7758-99-8 24%
SECTION 4 – FIRST AID MEASURES
EYE CONTACT Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.
SKIN CONTACT Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.
INHALATION Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.
INGESTION Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.
Most Important Symptoms, both acute & delayed May cause eye and skin irritation. Toxic if swallowed.
SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE Product will not burn or support combustion.
MEANS OF EXTINCTION Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD NAP
UPPER FLAMMABLE LIMIT NAP
LOWER FLAMMABILITY LIMIT NAP
AUTO IGNITION TEMPERATURE NAP
SENSITIVITY TO IMPACT NAP
SENSITIVITY TO STATIC DISCHARGE NAP
HAZARDOUS COMBUSTION PRODUCTS Toxic sulphur oxides and toxic metallic fumes are released during a fire or when product is heated to decomposition.
SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.
SECTION 7 – HANDLING AND STORAGE
HANDLING Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS NIOSH: REL 10 hr TWA 1 mg/m3 / Copper (dusts and mists)
ENGINEERING CONTROLS Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.
PERSONAL PROTECTIVE EQUIPMENT
Skin Wear chemical resistant gloves, clothing, and face protection when handling or applying this product.
Eyes Wear chemical resistant goggles when handling or applying this product
Respirator If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE Liquid
COLOUR Light blue
BOILING POINT NAV
EVAPORATION RATE NAV
ODOUR NAV
SOLUBILITY IN WATER Very soluble
APPEARANCE Light blue liquid
VISCOSITY Not viscous
FREEZING POINT NAV
SPECIFIC GRAVITY 1.17 – 1.22 g/cm3
pH 2 – 2.5
ODOUR THRESHHOLD NAV
SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY Stable under normal conditions of use and storage.
INCOMPATIBLE WITH OTHER SUBSTANCES Strong acids and strong bases.
HAZARDOUS DECOMPOSING PRODUCTS Toxic sulphur oxides and metallic fumes are released during a fire or when heated to decomposition.
SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY Copper sulphate pentahydrate: 7733-02-0: LD50 (oral, mouse) 245 mg / kg.
LD50 (oral, rabbit) 2 g / kg.
CHRONIC TOXICITY Prolonged or repeated skin exposure can lead to dermatitis.
EYE / SKIN IRRITATION May cause eye and skin irritation.
SENSITIZATION May cause skin sensitization.
CARCINOGENICITY No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY Not available.
MUTAGENICITY Some evidence in vitro lymphocyte human cells (RTECS).
SECTION 12 – ECOLOGICAL INFORMATION
ECOTOXICITY Very harmful to aquatic life in low concentrations with possible long-term effects.
SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
SECTION 14 – TRANSPORT INFORMATION
SHIPPING TDG: Not a dangerous good for transport.
DOT: Not a dangerous good for transport.
SECTION 15 – REGULATORY INFORMATION
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).
SECTION 16 – OTHER INFORMATION
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.
Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.
The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Independent 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 20‑260‑4180
REPORT DATE: Sept 16, 2021
RECEIVED DATE: Sept 05, 2021
SEND TO: 52790
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
SAMPLE ANALYSIS

Sample ID: Active COPPER

Lab Number: 8801817

Arsenic (total)
Level Found < 5.0
Units mg/kg
Reporting Limit 5
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Cadmium (total)
Level Found < 0.50
Units mg/kg
Reporting Limit 0.5
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Chromium (total)
Level Found 3.92
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Cobalt (total)
Level Found < 1.00
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Copper (total)
Level Found 54100
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/12
Verified Date trh1-2020/09/16
Mercury (total)
Level Found < 0.05
Units mg/kg
Reporting Limit 0.05
Method EPA 7471
Analyst Date pjd8-2020/09/10
Verified Date trh1-2020/09/16
Molybdenum (total)
Level Found < 1.0
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Nickel (total)
Level Found 8.6
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Selenium (total)
Level Found < 10.0
Units mg/kg
Reporting Limit 10
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Zinc (total)
Level Found < 2.0
Units mg/kg
Reporting Limit 2
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/16
Lead (total)
Level Found < 5.00
Units mg/kg
Reporting Limit 5
Method EPA 6020
Analyst Date ras7-2020/09/16
Verified Date trh1-2020/09/16
Copper (total)
Level Found 57300
Units ppm
Reporting Limit 20
Method MWL ME PROC 26
Analyst Date trh1-2020/09/09
Verified Date tat9-2020/09/11
Sulfur (total)
Level Found 2.76
Units %
Reporting Limit 0.05
Method MWL ME PROC 26
Analyst Date trh1-2020/09/09
Verified Date tat9-2020/09/11

For questions please contact:
Rob Ferris Signature
Rob Ferris
Account Manager
(402)-829-9871
[email protected]

Sample(s) was prepared for EPA 6010 analysis by EPA 3050b.

*All results are reported on an AS RECEIVED basis., ppm=parts per million, ppm=mg/kg.

The result(s) issued on this report only reflect the analysis of the sample(s) submitted.

Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.

Downloads

Label SDS
Feeding Calculator Australia

Feeding Calculator

Calculate

Related Products

…

Resources

  • Active AgriScience Storage Tanks

    Storage and Handling

    A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.

Find a Sales Rep

Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!

Active AgriScience App

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!