Active GrainFILL™
The nutrient content in Active GrainFILL™ optimizes grain size and weight by improving nutrition and extending the grain fill period.
Description
When to Use
Wheat, barley, oats: apply during the grain filling stage (BBCH 60-65 stage / anthesis-end flowering).
Spray early morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C (84°F). Avoid spraying on windy days.
For the best results, use the complete line of recommended Active AgriScience™ products for your crop.
- Wheat, Corn: Active PRIME™, Active BUILD™, Active GrainFILL™, Micronutrients as needed.
- Canola, Tomatoes, Vegetables, Hops: Active PRIME™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
- Soybean, Pulses: Active PLS™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
- Tree Fruit, Tree Nuts, Berries: Active BUILD™, Active FLOWER™, Micronutrients as needed.
Benefits
Extended Duration of Grain Filling
Active GrainFILL™ provides potassium in an easily absorbed form. Potassium is a key element in remobilization of food reserves to developing grains during the grain filling stage. Potassium helps extend the grain filling duration.
Nitrogen Remobilization
Both Nitrogen and Potassium help build new tissues after pollination and fertilisation. Nitrogen plays a role in achieving high grain yield with adequate protein content. Nitrogen remobilization to grains after flowering naturally occurs in the form of amino acids. The 12 free amino acids in Active GrainFILL™ help enhance this process.
Timely Nitrogen Supply
Amino acids help plants during stress situations by acting as osmolytes (cell pressure regulators), regulating ion transport, modulating stomatal opening, and detoxifying heavy metals. Plants supplied with Active GrainFILL™ contains many amino acids, including proline, to help the plant mitigate abiotic stress.
Helps Optimize Grain Size and Weight
Better nutrition and extended grain filling helps maintain yields during stress conditions or improve yields during normal growing conditions. At least 30% of harvested grain nitrogen is linked to post anthesis (post flowering) nitrogen supply. It is clear that an adequate supply of nitrogen during grain filling is critical for good yields. A simple way of providing nitrogen during post anthesis is to tank mix Active GrainFILL™ with other compatible agrochemicals sprayed during this period.
While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.
Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.
*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).
Label
Contains nutrients to support reproductive growth of cereal crops.
DIRECTIONS FOR USE: READ ENTIRE LABEL BEFORE USE.
Wheat, barley, oats: Apply once during the grain filling stage (BBCH 60-65 stage / anthesis-end flowering) as a foliar spray using 2.5 L / ha with a minimum of 100 L of water / ha.
Spray early morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C. Avoid spraying on windy days.
Add tank-mix partners in the following order: Water, Fungicide, Active GrainFILL. Keep agitator running while mixing and spraying.
Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program. Do not apply within 21 days to harvest. Do not re-enter or allow re-entry into treated areas until 4 hours after application. Do not allow rinse water to contaminate ponds or lakes. Do not apply to any body of water. For terrestrial uses, do not apply directly to water or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not connect an irrigation system unless the backflow system is in place to prevent water source contamination.
COMPATIBILITY: This product is compatible with most fertilisers and pesticides. If compatibility is uncertain, conduct a jar test prior to use.
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
CAUTION: THIS FERTILISER CONTAINS IRON AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.
ANALYSIS (W/V%):
- Total Nitrogen (N): 13%
- Potassium (K): 15.1%
- Sulfur (S): 8.5%
- Cytokinin – Kinetin: 0.07%
- Iron (Fe)(actual): 0.007%
- Amino acids: 0.04%
- Ascorbic acid: 0.004%
- Vitamin B complex: 0.04%
DANGER HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE / doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE / doctor. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
FOR CHEMICAL EMERGENCY: Call +1800 039 008 and refer to SDS.
For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
Independent 3rd Party Yield Data
WHEAT • AUSTRALIA, 2023 AVERAGE YIELD *
kg/ha
3600
3300
3000
2700
2400
2100
1800
1500
1200
+
122
kg/ha
Control
Active GrainFILL
| TREATMENT | Control (kg/ha) | Active GrainFILL™ (kg/ha) |
|---|---|---|
| REP 1 | 2883 | 3173 |
| REP 2 | 3359 | 3181 |
| REP 3 | 2975 | 3336 |
| REP 4 | 2685 | 2699 |
| AVERAGE | 2975 | 3097 |
| % CHANGE | 4.1% |
*3rd party research with SEAR (South East Agronomy Research).
WHEAT • AUSTRALIA, 2023 AVERAGE PROTEIN *
% protein
13.5
13.25
13
12.75
12.5
12.25
12
11.75
11.5
+
0.25
% protein
Control
Active GrainFILL
| TREATMENT | Control (%) | Active GrainFILL™ (%) |
|---|---|---|
| REP 1 | 13.00 | 13.30 |
| REP 2 | 13.10 | 12.90 |
| REP 3 | 12.50 | 12.60 |
| REP 4 | 12.20 | 13.00 |
| AVERAGE | 12.70 | 12.95 |
| % CHANGE | 2.0% |
*3rd party research with SEAR (South East Agronomy Research).
WHEAT • CANADA, 2021 AVERAGE PROTEIN & YIELD *
kg/ha
2400
2100
1800
1500
1200
900
600
300
0
+
350
kg/ha
Control
Active GrainFILL
| TREATMENT | Control | Active GrainFILL™ |
|---|---|---|
| PROTEIN CONTENT | 20.7% | 21.9% |
| PROTEIN INCREASE | 1.2% | |
| YIELD | 1520 kg/ha | 1870 kg/ha |
| YIELD INCREASE | 350 kg/ha | |
| % CHANGE | 23% |
*3rd party research with Ag-Quest.
WHEAT • CANADA, 2020 AVERAGE YIELD *
kg/ha
2400
2100
1800
1500
1200
900
600
300
0
+
118
kg/ha
Control
Active
GrainFILL
GrainFILL
| TREATMENT | Control | Active GrainFILL™ |
|---|---|---|
| REP 1 | 2287 kg/ha | 2690 kg/ha |
| REP 2 | 942 kg/ha | 942 kg/ha |
| REP 3 | 807 kg/ha | 874 kg/ha |
| REP 4 | 942 kg/ha | 942 kg/ha |
| AVERAGE | 1244 kg/ha | 1362 kg/ha |
| % CHANGE | 9.5% |
*3rd party research with Ag-Quest.
WHEAT • CANADA, 2020 AVERAGE SEED WEIGHT & YIELD*
kg/ha
7000
6000
5000
4000
3000
2000
1000
0
+
895
kg/ha
Control
Active GrainFILL
| TREATMENT | Control | Active GrainFILL™ |
|---|---|---|
| AVERAGE SEED WEIGHT | 10.4 g/2 plants | 12.2 g/2 plants |
| AVERAGE YIELD | 5151 kg/ha | 6046 kg/ha |
| YIELD INCREASE | 895 kg/ha | |
| % YIELD CHANGE | 17.4% |
*3rd party research with the University of British Columbia.
Compatibility
Compatible with most fungicides, herbicides, pesticides, and fertilisers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.
| Active GrainFILL COMPATIBILITY WITH FUNGICIDES |
|---|
| COMPATIBLE | |||
|---|---|---|---|
| Bravo Zn | |||
| Caramba | |||
| Delaro 325 SC | |||
| Folicur 250 EC | |||
| Fuse | |||
| Priaxor | |||
| Proline 480 SC | |||
| Quilt | |||
| Tilt 250 E | |||
| Vertisan | |||
| CAUTION | |||
|---|---|---|---|
| Acapela | |||
| Prosaro 250 EC | |||
| Quadris | |||
| Twinline | |||
| INCOMPATIBLE | |||
|---|---|---|---|
| Dithane | |||
| Manzate | |||
| Active GrainFILL WITH TANK MIXTURES |
|---|
| COMPATIBLE TANK MIX #1 | |
|---|---|
| Agchem 1 | Miravis Ace (SE) |
| Agchem 2 | Agral 90 (ADJ) |
| Fertiliser | Active GRAINFILL (Lfert) |
| Carrier Rate | 10 GPA |
Safety Data Sheet
| SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION | |
| PRODUCT IDENTIFIER | Active GrainFILL |
| PRODUCT USE | Agricultural fertiliser |
| MANFACTURERS NAME | Active Agriscience Australia Pty Ltd. |
| ADDRESS | 11 Stenton Corner Leeming WA 6149, Australia |
| DATE | Feb.13, 2024 |
| EMERGENCY TELEPHONE | +1800 039 008 |
| PREPARED BY | Active AgriScience Inc. |
| USE RESTRICTIONS | For professional use only. Use only as labeled. |
| SECTION 2 – HAZARDS IDENTIFICATION | |
| GHS CLASSIFICATION | |
| HPR (WHMIS 2015) | Skin Corrosion / Irritation: Category 1A Specific Target Organ Toxicity (single exposure) Category 3; Target organs: respiratory system |
| OSHA Hazard Communication Standard (29 CFR 1910.1200) | Skin Corrosion / Irritation: Category 1A Specific Target Organ Toxicity (single exposure) Category 3; Target organs: respiratory system |
  DANGER |
HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
| SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS | ||
| INGREDIENTS | CAS# | CONCENTRATION |
| Potassium hydroxide | 1310-58-3 | 5-10% |
| SECTION 4 – FIRST AID MEASURES | |
| EYE CONTACT | Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. |
| SKIN CONTACT | Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. |
| INHALATION | Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor. |
| INGESTION | Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. |
| Most Important Symptoms, both acute & delayed | Causes severe burns and eye damage. May cause respiratory irritation. |
| SECTION 5 – FIRE FIGHTING MEASURES | |
| FLAMMABLE | Product will not burn or support combustion. |
| MEANS OF EXTINCTION | Use extinguishing methods appropriate for the surrounding fire. |
| FLASHPOINT & METHOD | NAP |
| UPPER FLAMMABLE LIMIT | NAP |
| LOWER FLAMMABILITY LIMIT | NAP |
| AUTO IGNITION TEMPERATURE | NAP |
| SENSITIVITY TO IMPACT | NAP |
| SENSITIVITY TO STATIC DISCHARGE | NAP |
| HAZARDOUS COMBUSTION PRODUCTS | Toxic, irritating and/or corrosive gases may be released during a fire. |
| SECTION 6 – ACCIDENTAL RELEASE MEASURES | |
| LEAK & SPILL PROCEDURES | Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
| SECTION 7 – HANDLING AND STORAGE | |
| HANDLING | Wear personal protective equipment outlined in SECTION 8. Do not breathe mist/spray. Do not apply when air temperatures are above 29°C (85°F) and avoid spraying on windy days. Do not apply within 21 days to harvest. Do not re-enter or allow re-entry into treated areas until 4 hours after application. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate or allow rinse water to contaminate ponds or lakes. Do not connect an irrigation / chemigation system unless the backflow system (backflow preventer, check valve, vacuum relief valve) is in place to prevent water source contamination from backflow. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
| STORAGE | KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. |
| SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION | |
| EXPOSURE LIMITS | Potassium Hydroxide: ACGIH TLV=2 mg/m3 (ceiling). |
| ENGINEERING CONTROLS | Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
| PERSONAL PROTECTIVE EQUIPMENT | |
| Skin | Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently. |
| Eyes | Wear chemical resistant goggles when handling or applying this product. |
| Respirator | Use an air purifying respirator when handling or applying this product. |
| SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES | |
| PHYSICAL STATE | Liquid |
| COLOUR | Light amber |
| BOILING POINT | NAV |
| EVAPORATION RATE | NAV |
| ODOUR | NAV |
| SOLUBILITY IN WATER | Product is a solution |
| APPEARANCE | Light amber liquid |
| VISCOSITY | NAV |
| FREEZING POINT | NAV |
| SPECIFIC GRAVITY | 1.28 – 1.32 g/cm3 |
| pH | 14.0 – 15.5 |
| ODOUR THRESHHOLD | NAV |
| SECTION 10 – STABILITY AND REACTIVITY | |
| CHEMICAL STABILITY | Stable under normal conditions of use and storage. |
| INCOMPATIBLE WITH OTHER SUBSTANCES | Not available. |
| HAZARDOUS DECOMPOSING PRODUCTS | Toxic irritating, and/or corrosive gases may be released during a fire. |
| SECTION 11 – TOXICOLOGICAL INFORMATION | |
| ACUTE TOXICITY | Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria. |
| CHRONIC TOXICITY | Based on the available information, product does not meet criteria for chronic toxicity. |
| EYE / SKIN IRRITATION | Causes severe burns and eye damage. |
| SENSITIZATION | Not available. |
| CARCINOGENICITY | No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
| REPRODUCTIVE TOXICITY | Not available. |
| MUTAGENICITY | Not available. |
| Possible delayed effects | Potassium hydroxide may damage tissues with a delayed sensation of pain. May penetrate deeper layers of tissue until removed. |
| SECTION 12 – ECOLOGICAL INFORMATION | |
| ECOTOXICITY | Harmful to aquatic organisms. Avoid release into the environment. |
| SECTION 13 – DISPOSAL CONSIDERATIONS | |
| WASTE DISPOSAL | Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
| SECTION 14 – TRANSPORT INFORMATION | |
| SHIPPING | TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. |
| SECTION 15 – REGULATORY INFORMATION |
| This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
| SECTION 16 – OTHER INFORMATION |
| To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
3rd Party Lab Analysis
The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.
REPORT NUMBER: 19‑298‑4075 v3
REPORT DATE: Nov 21, 2019
RECEIVED DATE: Oct 21, 2019
SEND TO: 52790
REPORT DATE: Nov 21, 2019
RECEIVED DATE: Oct 21, 2019
SEND TO: 52790
13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
FOLIAR FERTILISER
10-0-14
For: (52790) Active Agriscience Inc
FOLIAR FERTILISER
10-0-14
Sample ID: Active GrainFILL
Lab Number: 8687155
| Nitrogen (total) | |
|---|---|
| Level Found | 10.6 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL WC PROC 55 |
| Analyst Date | hns0-2019/10/23 |
| Verified Date | asl4-2019/10/25 |
| Phosphate (P2O5) | |
|---|---|
| Level Found | 0.82 |
| Units | % |
| Reporting Limit | 0.1 |
| Method | MWL ME PROC 26 |
| Analyst Date | Auto-2019/10/23 |
| Verified Date | asl4-2019/10/25 |
| Potash (K2O) | |
|---|---|
| Level Found | 14.4 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | Auto-2019/10/23 |
| Verified Date | asl4-2019/10/25 |
| Phosphate (available, direct extraction) | |
|---|---|
| Level Found | 0.8 |
| Units | % |
| Reporting Limit | 0.1 |
| Method | AOAC 2015.18 |
| Analyst Date | eas2-2019/10/22 |
| Verified Date | asl4-2019/10/25 |
| Reactivity with acid | |
|---|---|
| Level Found | negative |
| Units | |
| Reporting Limit | n/a |
| Method | SW-846, CH. 7.3 |
| Analyst Date | lma2-2019/11/15 |
| Verified Date | lma2-2019/11/15 |
| Iron (total) | |
|---|---|
| Level Found | 54 |
| Units | ppm |
| Reporting Limit | 50 |
| Method | MWL ME PROC 26 |
| Analyst Date | trh1-2019/11/21 |
| Verified Date | asl4-2019/11/21 |
| Sulfur (total) | |
|---|---|
| Level Found | 6.53 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | trh1-2019/11/21 |
| Verified Date | asl4-2019/11/21 |
For questions please contact:
Rob Ferris
Account Manager
(402)-829-9871
[email protected]
This report was reissued on 2019-11-21 17:08:01 by asl4 for the following reason: added per clien.
*All results are reported on an AS RECEIVED basis., ppm=parts per million, ppm=mg/kg.
The result(s) issued on this report only reflect the analysis of the sample(s) submitted.
Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.
Feeding Calculator
Calculate
Related Products
…
-
Active FLOWER™
The nutrient content in Active FLOWER™ helps enhance pollen development, anther dehiscence, pollen hydration, fertilisation, and production of fruit, pods and seeds.
Resources
-
Trial Protocol
With unexpected variables such as soil conditions, weather, pests, diseases, tank mix partners, applications rates, and errors in mixing and application, we encourage all prospective customers to run trials of our products before broad acreage adoption. Please visit our Trial Protocol page to learn more.
-
Storage and Handling
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Download the App
A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.
Download it for free on Android or iOS!
-
