Active Iron™

Active Iron™ is a foliar-applied iron and sulfur fertiliser solution that prevents or corrects nutrient deficiencies in crops.

Category: Micro Nutrients Tags: Grains, Oilseeds, Pulses, Vegetables

Description

Active Iron™ is a foliar-applied iron fertiliser solution that helps alleviate iron deficienies that can reduce crop yields. Powered by Active AgriScience’s proprietary bioactive complex TSMC, Active Iron improves nutrient absorption and utilization efficiency while also enhancing stress mitigation.

Iron plays a vital role in plant biology, essential for the formation of chlorophyll and the process of photosynthesis. Additionally, it is integral to plant enzyme systems and respiratory functions.

When to Use

As indicated by soil analysis, throughout the growing cycle. Iron is not readily mobile within the plant, so must be continuously available, although in small amounts. Too much iron in the soil is harmful, so soil analysis testing is necessary.

For the best results, use the complete line of recommended Active AgriScience™ products for your crop.

Wheat, Corn: Active PRIME™, Active BUILD™, Active GrainFILL™, Micronutrients as needed.
Canola, Tomatoes, Vegetables, Hops: Active PRIME™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
Soybean, Pulses: Active PLS™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
Tree Fruit, Tree Nuts, Berries: Active BUILD™, Active FLOWER™, Micronutrients as needed.

Benefits

Iron helps build the structure for many enzymes associated with energy transfer, chlorophyll formation, nitrogen reduction, respiration and metabolism. Pulse crops are more susceptible to iron deficiencies so it’s important to conduct a soil and tissue analysis to make sure your crop is topped up with the appropriate micronutrients.

Active Iron Supports:

Disease and stress resistance
Chlorophyll Synthesis
Enzyme Activation
Nitrogen Metabolism
Root Development

Compatibility

Compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used.

Label

6.7% Fe 4% S

HELPS CORRECT IRON AND SULFUR DEFICIENCIES

Active Iron™ is a foliar-applied iron and sulfur fertiliser solution that prevents or corrects nutrient deficiencies in crops.

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. Apply at the rate of 1.25 L / ha with a minimum of 100 L of water / ha. Ensure sufficient water for thorough coverage. Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilisers. Suitable for ground or aerial spraying.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used.

Add tank mix components in the following order: Water, Agrochemical, Active Iron™. Keep agitator running while mixing and spraying.

ANALYSIS (W/V%):

Sulfur (S): 4%
Iron (Fe)(actual): 6.7%

WARNING HAZARD STATEMENTS: HARMFUL IF SWALLOWED. CAUSES SERIOUS EYE IRRITATION. CAUSES SKIN IRRITATION.

CAUTION: THIS FERTILISER CONTAINS IRON AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Wear protective gloves / protective clothing/eye protection/face protection. Wash hands and exposed skin thoroughly after handling.

FIRST AID: IF SWALLOWED: Call a poison centre/doctor if you feel unwell. IF IN EYES: Wash cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, get medical advice / attention. IF ON SKIN: Wash with plenty water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked-up in a cool, dry, well ventilated area.

DISPOSAL: Dispose of contents / container in accordance with federal, provincial, and municipal regulations.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

FOR CHEMICAL EMERGENCY: Call +1800 039 008 and refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER	Active Iron
PRODUCT USE	Agricultural fertiliser
MANFACTURERS NAME	Active Agriscience Australia Pty Ltd.
ADDRESS	11 Stenton Corner Leeming WA 6149, Australia
DATE	Feb. 13, 2024
EMERGENCY PHONE	+1800 039 008
PREPARED BY	Active AgriScience Inc.
USE RESTRICTIONS	For professional use only. Use only as labeled.

SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION
HPR (WHMIS 2015)	Acute Toxicity Oral: Category 3 Eye Damage / Irritation: Category 2A Skin Corrosion / Irritation: Category 1C
OSHA Hazard Communication Standard (29 CFR 1910.1200)	Acute Toxicity Oral: Category 3 Eye Damage / Irritation: Category 2A Skin Corrosion / Irritation: Category 1C
DANGER	HAZARD STATEMENTS: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. TOXIC IF SWALLOWED. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: *IF SWALLOWED:* Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. *IF ON SKIN:* Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. *IF INHALED:* Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. *IF IN EYES:* Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well-ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
INGREDIENTS	CAS#	CONCENTRATION
Iron sulphate Heptahydrate	7782-63-0	15-20%

SECTION 4 – FIRST AID MEASURES
EYE CONTACT	Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
SKIN CONTACT	Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention.
INHALATION	Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.
INGESTION	Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.

SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE	Product will not burn or support combustion.
MEANS OF EXTINCTION	Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD	NAP
UPPER FLAMMABLE LIMIT	NAP
LOWER FLAMMABILITY LIMIT	NAP
AUTO IGNITION TEMPERATURE	NAP
SENSITIVITY TO IMPACT	NAP
SENSITIVITY TO STATIC DISCHARGE	NAP
HAZARDOUS COMBUSTION PRODUCTS	Toxic sulphur oxides and toxic metallic fumes are released during a fire or when product is heated to decomposition.

SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES	Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE
HANDLING	Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE	KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well-ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS	NIOSH: REL 10 hr TWA 1 mg/m3
ENGINEERING CONTROLS	Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.
PERSONAL PROTECTIVE EQUIPMENT
Skin	Wear chemical resistant gloves, clothing, and face protection when handling or applying this product.
Eyes	Wear chemical resistant goggles when handling or applying this product
Respirator	If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE	Liquid
COLOUR	Light amber
BOILING POINT	NAV
EVAPORATION RATE	NAV
ODOUR	NAV
SOLUBILITY IN WATER	Very soluble
APPEARANCE	Light amber coloured liquid
VISCOSITY	Not viscous
FREEZING POINT	NAV
SPECIFIC GRAVITY	1.13 – 1.17 g/cm³
pH	1.2 – 1.3
ODOUR THRESHHOLD	NAV

SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY	Stable under normal conditions of use and storage.
INCOMPATIBLE WITH OTHER SUBSTANCES	Strong acids and strong bases.
HAZARDOUS DECOMPOSING PRODUCTS	Toxic sulphur oxides and metallic fumes are released during a fire or when heated to decomposition.

SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY	Iron Sulphate Heptahydrate: 7782-63-0: LD₅₀ (oral, mouse) 1520 mg / kg. LDL₀ (oral, rabbit) 2778 mg / kg.
CHRONIC TOXICITY	Prolonged or repeated skin exposure can lead to dermatitis.
EYE / SKIN IRRITATION	Causes severe skin burns and eye damage.
SENSITIZATION	May cause skin sensitization.
CARCINOGENICITY	No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY	Not available.
MUTAGENICITY	Some evidence in vitro lymphocyte human cells (RTECS).

SECTION 12 – ECOLOGICAL INFORMATION
ECOTOXICITY	Very harmful to aquatic life in low concentrations with possible long-term effects.

SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL	Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION
SHIPPING	TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.
Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.
The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Downloads

Label SDS

Feeding Calculator Australia

Feeding Calculator

Calculate

Active Iron™