Active Molybdenum™

Active Molybdenum™ is a foliar-applied molybdenum fertiliser solution that can alleviate nutrient deficiencies in crops.

Description

Active Molybdenum™ is a foliar-applied fertiliser solution that alleviates molybdenum deficiencies that can reduce crop yields. Powered by Active AgriScience’s proprietary bioactive complex TSMC, Active Molybdenum improves nutrient absorption and utilization efficiency while also enhancing stress mitigation.

When to Use

Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies.

For the best results, use the complete line of recommended Active AgriScience™ products for your crop.

Benefits

Molybdenum plays a crucial role in the growth and development of plants by facilitating nitrogen fixation, nitrate reduction, and various metabolic processes. While plants require only trace amounts of molybdenum, its deficiency can significantly impact crop yields and overall plant health.

While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.

*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).

Label

5.2% P 24.1% Mo

HIGH MOLYBDENUM FERTILIZER

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. Apply at the rate of 1.25 L / ha with a minimum of 100 L of water / ha. Ensure sufficient water for thorough coverage. Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilisers. Suitable for ground or aerial spraying. Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.
COMPATIBILITY: Compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used. Add tank mix components in the following order: Water, agrochemical, Active Molybdenum™.
CAUTION: THIS FERTILISER CONTAINS MOLYBDENUM AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

ANALYSIS (W/V%):

  • Phosphorous (P) (actual): 5.2%
  • Molybdenum (Mo): 24.1%

WHMIS Pictogram Exclamation

WARNING HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. Wear air supplied respirator where airborne concentrations exceed recommended exposure limits or are unknown. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN (or hair): Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. Do not allow product to dry out. Corrosive sludge may form upon prolonged storage. DISPOSAL: Dispose of contents/container in accordance with Federal, provincial and local regulations.
FOR CHEMICAL EMERGENCY: Call +1800 039 008 or refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Compatibility

A compatibility test is recommended if the desired combination has not been previously used.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active Molybdenum 14.2% Mo

PRODUCT USE

Agricultural fertiliser

MANFACTURERS NAME

Opal Australasia

ADDRESS

7 Yeates Road, Kwinana Beach, WA 6167, Australia

DATE

February 28, 2024

EMERGENCY TELEPHONE

+1800 039 008

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

DISTRIBUTORS NAME

 

STREET ADDRESS

 

CITY

 

POSTAL CODE

 

COUNTRY

 

EMERGENCY TELEPHONE

 

 

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

HPR (WHMIS 2015)

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

OSHA Hazard Communication Standard (29 CFR 1910.1200)

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

WHMIS Pictogram Exclamation

WARNING

HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up at a minimum temperature of 8°C in a dry, well-ventilated area away from food or feed storage. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

 

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Sodium Molybdate

7631-95-0

35 – 45%

Phosphoric acid

7664-38-2

35 – 45%

 

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

Most Important Symptoms, both acute & delayed

May cause eye and skin irritation.

 

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic and / or irritating gases may be released during a fire.

 

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

 

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. If mists are present and ventilation is poor or absent, wear an air purifying respirator. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up at a minimum temperature of 8°C in a dry, well ventilated area away from food or feed storage.

 

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

Wear chemical resistant gloves, face protection and clothing when handling or applying this product.

Eyes

Wear chemical resistant goggles when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

 

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Golden

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Fully soluble

APPEARANCE

Golden, slight amber, viscous liquid

VISCOSITY

Viscous

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.7 – 1.85 kg/L

pH

2 – 3

ODOUR THRESHHOLD

NAV

 

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic and/or irritating gases may be released during a fire.

 

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: does not meet criteria.

Acute Dermal: does not meet criteria.

CHRONIC TOXICITY

Long term inhalation of mists may cause central nervous system and lung effects.

EYE / SKIN IRRITATION

May cause eye and skin irritation.

SENSITIZATION

Not available.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Not available.

MUTAGENICITY

Not available.

 

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Not available.

 

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

 

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

 

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

 

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Downloads

Feeding Calculator Australia

Feeding Calculator

Calculate

Find a Sales Rep

Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.