Active PRIME™
The nutrient content in Active PRIME™ helps improve germination with significantly greater root growth for hardier seedlings.
Description
Active PRIME™ contains nutrients needed for your newly seeded crop to get off to a strong start. Active PRIME is a seed coating that helps improve germination, boosts root growth, and protects seeds and seedlings from unfavourable environmental conditions.
When to Use
Prior to seeding wheat, canola, corn, barley, oat, flax, sunflower, and vegetable seeds.
For the best results, use the complete line of recommended Active AgriScience™ products for your crop.
- Wheat, Corn: Active PRIME™, Active BUILD™, Active GrainFILL™, Micronutrients as needed.
- Canola, Tomatoes, Vegetables, Hops: Active PRIME™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
- Soybean, Pulses: Active PLS™, Active BUILD™, Active FLOWER™, Micronutrients as needed.
- Tree Fruit, Tree Nuts, Berries: Active BUILD™, Active FLOWER™, Micronutrients as needed.
How it Works
Active PRIME is a dressing applied to seeds before planting. It contains nutrients, organic acids, and Active AgriScience’s proprietary activation formula. Active PRIME helps protect the seeds and allows the nutrients to be utilized, even in unfavourable conditions, producing an increased number of roots and deeper roots.
While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption. Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests. *Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).
Label
Contains nutrients to support seed germination and root growth.
DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. SHAKE WELL BEFORE USING.
Apply once before seeding as a seed nutrient dressing to wheat, canola, corn, barley, oat, flax, sunflower, and vegetable seeds at the rate of 4 L / metric tonne of seed. Seed coating can be done simultaneously with Active PRIME™ and compatible agrochemicals. If using Active PRIME without additional agrochemicals, dilute with water (1:1 ratio) to ensure uniform coverage of seeds.
• Calibrate equipment to release the required amount of Active PRIME and other agrochemicals based on seed flow rate.
• Thoroughly mix seeds with the Active PRIME (and other agrochemicals) mixture. A colouring additive allows a visual check to ensure all seeds are uniformly coated.
• Allow treated seeds to air dry for 5-10 min before seeding.
Application rates exceeding recommended rates can negatively effect seed germination. Always follow label directions.
COMPATIBILITY: This product is compatible with most fertilisers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use. Keep agitator running while mixing and spraying.
ANALYSIS (W/V%):
- Total Nitrogen (N): 4.7%
- Phosphorous (P): 8.2%
- Potassium (K): 4.7%
- Boron (B)(actual): 0.06%
- Iron (Fe)(actual): 0.01%
- Manganese (Mn)(actual): 1.0%
- Zinc (Zn)(actual): 1.13%
- Citric acid: 0.63%
- EDTA (Ethylenediaminetettraacetic acid) (chelating agent): 0.05%
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
DANGER HAZARD STATEMENTS:CAUSES SEVERE BURNS AND EYE DAMAGE.
CAUTION: THIS FERTILISER CONTAINS BORON, IRON, MANGANESE AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
FOR CHEMICAL EMERGENCY: Call +1800 039 008 and refer to SDS.
For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
3rd Party Yield Data
WHEAT • W AUSTRALIA, 2023 AVERAGE YIELD DATA *
kg/ha
4000
3500
3000
2500
2000
1500
1000
500
0
+
138
kg/ha
Control
Active PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| REP 1 | 2883 kg/ha | 2961 kg/ha |
| REP 2 | 3359 kg/ha | 3448 kg/ha |
| REP 3 | 2975 kg/ha | 3523 kg/ha |
| REP 4 | 2685 kg/ha | 2519 kg/ha |
| AVERAGE | 2975 kg/ha | 3113 kg/ha |
| % CHANGE | 4.6% |
*3rd party field research with SEAR (South East Agronomy Research)
CANOLA • W AUSTRALIA, 2023 AVERAGE YIELD DATA *
kg/ha
4000
3500
3000
2500
2000
1500
1000
500
0
+
211
kg/ha
Control
Active
PRIME
PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| REP 1 | 1956 kg/ha | 1994 kg/ha |
| REP 2 | 1677 kg/ha | 2011 kg/ha |
| REP 3 | 1509 kg/ha | 1989 kg/ha |
| REP 4 | 1990 kg/ha | 1983 kg/ha |
| AVERAGE | 1783 kg/ha | 1994 kg/ha |
| % CHANGE | 11.8% |
*3rd party field research with SEAR (South East Agronomy Research)
WHEAT • W AUSTRALIA, 2021 AVERAGE YIELD DATA *
kg/ha
4000
3500
3000
2500
2000
1500
1000
500
0
+
266
kg/ha
Control
Active PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| Goomalling | 4044 kg/ha | 4154 kg/ha |
| Wongan Hills | 2632 kg/ha | 2925 kg/ha |
| Tammin | 2292 kg/ha | 2697 kg/ha |
| Wyalkatchem | 2392 kg/ha | 2850 kg/ha |
| York | 3907 kg/ha | 4117 kg/ha |
| Meckering | 3793 kg/ha | 3915 kg/ha |
| AVERAGE | 3177 kg/ha | 3443 kg/ha |
| % CHANGE | 0% | 8.4% |
*3rd party field research with MEAG Soil Science
WHEAT • CANADA, 6 YEAR AVERAGE YIELD DATA *
kg/ha
4000
3500
3000
2500
2000
1500
1000
500
0
+
150
kg/ha
Control
Active PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| YIELD – 2013 | 4315 kg/ha | 4539 kg/ha |
| YIELD – 2014 | 3547 kg/ha | 3704 kg/ha |
| YIELD – 2015 | 2852 kg/ha | 3037 kg/ha |
| YIELD – 2016 | 2538 kg/ha | 2650 kg/ha |
| YIELD – 2017 | 3821 kg/ha | 3973 kg/ha |
| YIELD – 2018 | 2101 kg/ha | 2174 kg/ha |
| AVERAGE | 3196 kg/ha | 3346 kg/ha |
| % CHANGE | 4.7% |
*3rd party field research with Ag-Quest, BC Grain, ICMS, Mara and New-Marc Research
CANOLA • CANADA, 6 YEAR AVERAGE YIELD DATA *
kg/ha
4000
3500
3000
2500
2000
1500
1000
500
0
+
165
kg/ha
Control
Active PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| YIELD – 2013 | 2521 kg/ha | 2746 kg/ha |
| YIELD – 2014 | 2914 kg/ha | 3340 kg/ha |
| YIELD – 2015 | 2370 kg/ha | 2505 kg/ha |
| YIELD – 2016 | 1894 kg/ha | 2000 kg/ha |
| YIELD – 2017 | 3233 kg/ha | 3272 kg/ha |
| YIELD – 2018 | 2177 kg/ha | 2236 kg/ha |
| AVERAGE | 2518 kg/ha | 2683 kg/ha |
| % CHANGE | 6.5% |
*3rd party field research with Ag-Quest, BC Grain, ICMS, Mara and New-Marc Research
PEAS • CANADA, 2 YEAR AVERAGE YIELD DATA *
kg/ha
4500
4000
3500
3000
2500
2000
1500
1000
500
+
366
kg/ha
Control
Active PRIME
| TREATMENT | Check | Active PRIME™ |
|---|---|---|
| YIELD – 2017 | 3449 kg/ha | 3665 kg/ha |
| YIELD – 2016 | 3665 kg/ha | 4182 kg/ha |
| AVERAGE | 3557 kg/ha | 3923 kg/ha |
| % CHANGE | 10.3% |
*3rd party field research with Ag-Quest, BC Grain, ICMS, Mara and New-Marc Research
Compatibility
Compatible with most fungicides, herbicides, pesticides, and fertilisers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.
| ACTIVE PRIME COMPATIBILITY WITH SEED TREATMENTS |
|---|
| COMPATIBLE |
|---|
| Apron Maxx RTA |
| Cruiser 5FS |
| Cruiser Maxx Vibrance Beans |
| Cruiser Maxx Vibrance Cereals |
| Cruiser Maxx Pulses |
| Cruiser Maxx Vibrance Pulses |
| Dividend XL RTA |
| Insure Cereal |
| Insure Pulse |
| Rancona Pinnacle |
| Rancona Trio |
| Raxil Pro |
| Raxil Pro Shield |
| Trilex Evergol |
| Trilex Evergol Shield |
| Vibrance 500FS |
| Vibrance Maxx |
| Vibrance Maxx RFC |
| Vibrance Quattro |
| Vitaflo 280 |
| ACTIVE PRIME WITH ACTIVE AGRISCIENCE PRODUCTS |
|---|
| COMPATIBLE |
|---|
| Active BUILD |
| Active COMPLETE |
| Proform N |
| Active COPPER |
| Active MANGANESE |
| Active ZINC |
| INCOMPATIBLE |
|---|
| Active FLOWER |
| Active KONNECT |
| Active BORON |
Safety Data Sheet
| SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION | |
| PRODUCT IDENTIFIER | Active PRIME |
| PRODUCT USE | Agricultural fertiliser |
| MANUFACTURERS NAME | Active Agriscience Australia Pty Ltd. |
| ADDRESS | 11 Stenton Corner Leeming WA 6149, Australia |
| EMERGENCY TELEPHONE | +1800 039 008 |
| DATE | Feb. 9, 2024 |
| PREPARED BY | Active AgriScience Inc. |
| USE RESTRICTIONS | For professional use only. Use only as labeled. |
| SECTION 2 – HAZARDS IDENTIFICATION | |
| GHS CLASSIFICATION | |
| HPR (WHMIS 2015) | Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 1 |
| OSHA Hazard Communication Standard (29 CFR 1910.1200) | Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 1 |
 DANGER |
HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
| SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS | ||
| INGREDIENTS | CAS# | CONCENTRATION |
| Phosphoric acid | 7664-38-2 | 15 – 20% |
| SECTION 4 – FIRST AID MEASURES | |
| EYE CONTACT | Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. |
| SKIN CONTACT | Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. |
| INHALATION | Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. |
| INGESTION | Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. |
| Most Important Symptoms, both acute & delayed | CAUSES SEVERE BURNS AND EYE DAMAGE. |
| SECTION 5 – FIRE FIGHTING MEASURES | |
| FLAMMABLE | Product will not burn or support combustion. |
| MEANS OF EXTINCTION | Use extinguishing methods appropriate for the surrounding fire. |
| FLASHPOINT & METHOD | NAP |
| UPPER FLAMMABLE LIMIT | NAP |
| LOWER FLAMMABILITY LIMIT | NAP |
| AUTO IGNITION TEMPERATURE | NAP |
| SENSITIVITY TO IMPACT | NAP |
| SENSITIVITY TO STATIC DISCHARGE | NAP |
| HAZARDOUS COMBUSTION PRODUCTS | Toxic, irritating and / or corrosive gases may be released during a fire. |
| SECTION 6 – ACCIDENTAL RELEASE MEASURES | |
| LEAK & SPILL PROCEDURES | Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
| SECTION 7 – HANDLING AND STORAGE | |
| HANDLING | Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
| STORAGE | KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. |
| SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION | |
| EXPOSURE LIMITS | Not available. |
| ENGINEERING CONTROLS | Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
| PERSONAL PROTECTIVE EQUIPMENT | |
| Skin | Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently. |
| Eyes | Wear chemical resistant goggles when handling or applying this product. |
| Respirator | If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product. |
| SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES | |
| PHYSICAL STATE | Liquid |
| COLOUR | Maroon |
| BOILING POINT | NAV |
| EVAPORATION RATE | NAV |
| ODOUR | NAV |
| SOLUBILITY IN WATER | Fully soluble |
| APPEARANCE | Maroon coloured liquid |
| VISCOSITY | NAV |
| FREEZING POINT | NAV |
| SPECIFIC GRAVITY | 1.21 – 1.28 g/cm3 |
| pH | 2 – 2.5 |
| ODOUR THRESHHOLD | NAV |
| SECTION 10 – STABILITY AND REACTIVITY | |
| CHEMICAL STABILITY | Stable under normal conditions of use and storage. |
| INCOMPATIBLE WITH OTHER SUBSTANCES | Not available. |
| HAZARDOUS DECOMPOSING PRODUCTS | Toxic and/or irritating gases may be released during a fire. |
| SECTION 11 – TOXICOLOGICAL INFORMATION | |
| ACUTE TOXICITY | Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria. |
| CHRONIC TOXICITY | Based on the available information, product does not meet criteria for chronic toxicity. |
| EYE / SKIN IRRITATION | Causes severe burns and eye damage. |
| SENSITIZATION | Not available. |
| CARCINOGENICITY | No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
| REPRODUCTIVE TOXICITY | Not available. |
| MUTAGENICITY | Not available. |
| SECTION 12 – ECOLOGICAL INFORMATION | |
| ECOTOXICITY | Not available. |
| SECTION 13 – DISPOSAL CONSIDERATIONS | |
| WASTE DISPOSAL | Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
| SECTION 14 – TRANSPORT INFORMATION | |
| SHIPPING | TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. |
| SECTION 15 – REGULATORY INFORMATION |
| This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
| SECTION 16 – OTHER INFORMATION |
| To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
3rd Party Lab Analysis
The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.
REPORT NUMBER: 20‑042‑4166
REPORT DATE: Feb 11, 2021
RECEIVED DATE: Feb 5, 2021
SEND TO: 52790
REPORT DATE: Feb 11, 2021
RECEIVED DATE: Feb 5, 2021
SEND TO: 52790
13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
4-18-6
For: (52790) Active Agriscience Inc
4-18-6
Sample ID: Active PRIME
Lab Number: 8721853
Date Sampled: 2020‑01‑29
| Nitrogen (total) | |
|---|---|
| Level Found | 3.87 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL WC PROC 55 |
| Analyst Date | hns0-2020/02/06 |
| Verified Date | tat9-2020/02/07 |
| Phosphate (P2O5) | |
|---|---|
| Level Found | 15.1 |
| Units | % |
| Reporting Limit | 0.1 |
| Method | MWL ME PROC 26 |
| Analyst Date | eas2-2020/02/11 |
| Verified Date | tat9-2020/02/11 |
| Potash (K2O) | |
|---|---|
| Level Found | 4.55 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | Auto-2020/02/11 |
| Verified Date | tat9-2020/02/11 |
| Boron (total) | |
|---|---|
| Level Found | 538 |
| Units | ppm |
| Reporting Limit | 100 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Sulfur (total) | |
|---|---|
| Level Found | < 0.05 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Magnesium (total) | |
|---|---|
| Level Found | < 0.01 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Sodium (total) | |
|---|---|
| Level Found | 0.05 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Iron (total) | |
|---|---|
| Level Found | 138 |
| Units | ppm |
| Reporting Limit | 50 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Calcium (total) | |
|---|---|
| Level Found | 0.02 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Manganese (total) | |
|---|---|
| Level Found | 8060 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Zinc (total) | |
|---|---|
| Level Found | 9860 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Copper (total) | |
|---|---|
| Level Found | < 20.0 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Molybdenum (total) | |
|---|---|
| Level Found | < 1.0 |
| Units | mg/kg |
| Reporting Limit | 1 |
| Method | EPA 6010 |
| Analyst Date | ery3-2020/02/07 |
| Verified Date | kkh9-2020/02/09 |
For questions please contact:
Rob Ferris
Account Manager
(402)-829-9871
[email protected]
*All results are reported on an AS RECEIVED basis., ppm = parts per million, ppm = mg/kg.
The result(s) issued on this report only reflect the analysis of the sample(s) submitted.
Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.
Feeding Calculator
Calculate
Resources
-
Storage and Handling
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Download the App
A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.
Download it for free on Android or iOS!
