ARM U™ 16% DMPP

A liquid additive for urea and UAN fertilisers that reduces nitrogen loss by inhibiting nitrification.

Description

Nitrogen fertiliser applied in certain conditions is prone to losses through nitrification leading to runoff, leaching, and denitrification (N₂O emissions). ARM U™ 16% DMPP slows down the nitrification process, thereby extending the availability of nitrogen in the soil and reducing fertiliser loss. By doing so, it ensures that plants have continuous access to this critical nutrient, fostering healthier growth and maximising yield potential.

When to Use

Whenever urea or UAN fertiliser is applied to soil.

Benefits

Slows Down the N Cycle
Slows the conversion of ammonium to nitrate, enhancing the efficiency of nitrogen fertilisers.

Limits Leaching and Run-off
Reduces nitrogen leaching and runoff by keeping nitrogen in the stable ammonium form longer.

Reduces N₂O Emissions
DMPP inhibits nitrification, reducing nitrous oxide emissions.

Improves Nitrogen-Use Efficiency
Maximises fertiliser efficiency, lowering overall costs by reducing the amount needed.

Add NBPT for Dual Protection
Can be mixed with ARM U™ 28% NBPT to inhibit all forms of nitrogen loss.

Less Product, More Impact
Requires less product per metric tonne of fertiliser compared to competitor brands.

How it Works

ARM U 16% DMPP contains 3,4-Dimethylpyrazole phosphate (DMPP), which inhibits nitrogen oxidation or nitrification by eliminating nitrosomonas and nitrobacter bacterial activity.

While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.

*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).

Label

16% DMPP

NITRIFICATION INHIBITOR

A liquid fertiliser additive that controls the loss of nitrogen through nitrification from urea and urea ammonium nitrate (UAN) fertilisers.

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

ACTIVE INGREDIENTS: 16.1% DMPP (3, 4-dimethylpyrazole phosphate).

INACTIVE INGREDIENTS: (83.9%) NMP (N-methyl-2-pyrrolidone), propylene glycol, emulsifier, preservative, dye.

BLENDING INSTRUCTIONS:

Blending into UREA-AMMONIUM NITRATE (UAN) SOLUTIONS: Use 0.35 L ARM U™ 16% DMPP/ 1000 kg UAN solution. Fill spray tank with half the desired amount of UAN, Measure the recommended quantity of ARM U™ 16% DMPP and add to the tank. Mix well. Add other products at this stage, if needed. Add the second half of the UAN solution. Continue mixing until well blended. Keep agitator running while mixing.

Blending into Urea: Use 0.6 L ARM U™ 16% DMPP/1000 kg Urea. For uniform blending, use a blender with impregnation equipment. Weigh the urea and transfer to blender. Add the required amount of ARM U™ 16% DMPP to the urea in the blender. Blend until the ARM U™ 16% DMPP is uniformly mixed into the urea. Do not add any other fertiliser materials until ARM U™ 16% DMPP is thoroughly distributed. If mixture appears wet or sticky, a drying agent may be added at this time. This product can be mixed with ARM U™ 28% NBPT to mitigate the losses from ammonia volatilisation along with nitrification and denitrification.

NOTE: Density = 1.07 grams / cubic centimeter at 20°C.

CAUTION: THIS PRODUCT CONTAINS ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

ANALYSIS (W/V):

Zinc (Zn)(actual): 0.2%
3, 4-dimethylpyrazole phosphate (DMPP): 16.1%

DANGER HAZARD STATEMENTS: CAUSES SERIOUS EYE DAMAGE. CAUSES SKIN IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Wear air supplied respirator where airborne concentrations exceed recommended exposure limits or are unknown. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. Keep livestock off treated areas until after 14 days or 2.5 cm of rainfall has accumulated.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE / doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE / doctor. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

FOR CHEMICAL EMERGENCY: Call +1800 039 008 or refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Independent 3rd Party Yield Data

CANOLA • CANADA, FALL APPLIED UREA*

kg/ha

3000

2500

2000

1500

1000

500

1410

1570

160

kg/ha

Control

ARM U

TREATMENT	Urea	ARM U™ 32%NBPT & 16%DMPP + Urea
TOTAL NH3 LOSS (kg N/ha)	16.6 (kg N/ha)	5.4 (kg N/ha)
% REDUCTION		67.0%
AVERAGE YIELD (kg/ha)	1410 (kg/ha)	1570 (kg/ha)
% CHANGE		11.3%

*3rd party research conducted by University of Manitoba and University of Winnipeg.

CANOLA • CANADA, SPRING APPLIED UAN*

kg/ha

3000

2500

2000

1500

1000

500

1762

1888

126

kg/ha

Control

ARM U

TREATMENT	UAN	ARM U™ 32%NBPT & 16%DMPP + UAN
TOTAL NH3 LOSS (kg N/ha)	4.0 (kg N/ha)	1.2 (kg N/ha)
% REDUCTION		70.0%
AVERAGE YIELD (kg/ha)	1762 (kg/ha)	1888 (kg/ha)
% CHANGE		7.2%

*3rd party research conducted by University of Manitoba and University of Winnipeg.

WHEAT • CANADA, FALL APPLIED UREA*

kg/ha

4000

3500

3000

2500

2000

1500

1000

500

2573

3544

971

kg/ha

Control

ARM U

TREATMENT	Urea	ARM U™ 32%NBPT & 16%DMPP + Urea
TOTAL NH3 LOSS (kg N/ha)	21.0 (kg N/ha)	2.4 (kg N/ha)
% REDUCTION		88.0%
AVERAGE YIELD (kg/ha)	2573 (kg/ha)	3544 (kg/ha)
% CHANGE		37.7%

*3rd party research conducted by University of Manitoba and University of Winnipeg.

WHEAT • CANADA, FALL APPLIED UAN*

kg/ha

4000

3500

3000

2500

2000

1500

1000

500

2201

2682

481

kg/ha

Control

ARM U

TREATMENT	UAN	ARM U™ 32%NBPT & 16%DMPP + UAN
TOTAL NH3 LOSS (kg N/ha)	2.6 (kg N/ha)	1.7 (kg N/ha)
% REDUCTION		35.0%
AVERAGE YIELD (kg/ha)	2201 (kg/ha)	2682 (kg/ha)
% CHANGE		22.0%

*3rd party research conducted by University of Manitoba and University of Winnipeg.

Compatibility

Compatible with urea, urea ammonium nitrate and other urea-based fertilisers.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER	ARM U 16% DMPP
PRODUCT USE	Liquid nitrogen stabilizer for urea fertilizers
MANFACTURERS NAME	Active Agriscience Australia Pty Ltd.
DATE	August 31, 2022
EMERGENCY TELEPHONE	+1800 039 008
PREPARED BY	Active Agriscience Australia Pty Ltd.
USE RESTRICTIONS	For professional use only. Use only as labeled.
DISTRIBUTORS NAME
STREET ADDRESS
CITY
POSTAL CODE
COUNTRY
EMERGENCY TELEPHONE

SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION
HPR (WHMIS 2015)	Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 2 Specific Target Organ Toxicity (STOT); Single exposure: Category 3 (respiratory irritation) Specific Target Organ Toxicity (STOT); Single exposure: Category 2 (kidneys) Reproductive toxicity: Category 1B
OSHA Hazard Communication Standard (29 CFR 1910.1200)	Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 2 Specific Target Organ Toxicity (STOT); Single exposure: Category 3 (respiratory irritation) Specific Target Organ Toxicity (STOT); Single exposure: Category 2 (kidneys) Reproductive toxicity: Category 1B
DANGER	HAZARD STATEMENTS: CAUSES SERIOUS EYE DAMAGE. CAUSES SKIN IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. MAY DAMAGE FERTILITY OR THE UNBORN CHILD. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Wear air supplied respirator where airborne concentrations exceed recommended exposure limits or are unknown. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. Keep livestock off treated areas until after 14 days or 2.5 cm of rainfall has accumulated. FIRST AID: *IF SWALLOWED:* Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE / doctor. *IF ON SKIN:* Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. *IF INHALED:* Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE / doctor. *IF IN EYES:* Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
INGREDIENTS	CAS#	CONCENTRATION
Propylene glycol	57-55-6	15-30%
N-methyl-2-pyrrolidone	872-50-4	30-45%
3,4-Dimethylpyrazole Phosphate (DMPP)	202842-98-6	12-18%

SECTION 4 – FIRST AID MEASURES
EYE CONTACT	Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
SKIN CONTACT	Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention.
INHALATION	Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE / doctor.
INGESTION	Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.
Most Important Symptoms, both acute & delayed	Causes serious eye damage. Causes skin irritation. May cause respiratory irritation. May damage fertility or the unborn child.

SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE	Product will not burn or support combustion.
MEANS OF EXTINCTION	Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD	NAP
UPPER FLAMMABLE LIMIT	NAP
LOWER FLAMMABILITY LIMIT	NAP
AUTO IGNITION TEMPERATURE	NAP
SENSITIVITY TO IMPACT	NAP
SENSITIVITY TO STATIC DISCHARGE	NAP
HAZARDOUS COMBUSTION PRODUCTS	Toxic irritating and/or corrosive gases may be released during a fire: carbon oxides, nitrogen oxides, sulphur oxides.

SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES	Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE
HANDLING	Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE	KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS	Canada OEL: N-methyl-2-pyrrolidone: TWA 400 mg/m3 OSHA: Not available
ENGINEERING CONTROLS	Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment.
PERSONAL PROTECTIVE EQUIPMENT
Skin	Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently.
Eyes	Wear chemical resistant goggles when handling or applying this product.
Respirator	Wear air supplied respirator where airborne concentrations exceed recommended exposure limits or are unknown.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE	Liquid
COLOUR	Blue
BOILING POINT	NAV
EVAPORATION RATE	NAV
ODOUR	NAV
SOLUBILITY IN WATER	Miscible in water
APPEARANCE	Blue liquid
VISCOSITY	38 cPs at 10°C
FREEZING POINT	NAV
SPECIFIC GRAVITY	1.05 – 1.1 g/cm³
pH	4 – 6
ODOUR THRESHHOLD	NAV

SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY	Stable under normal conditions of use and storage.
INCOMPATIBLE WITH OTHER SUBSTANCES	Acids, strong reducing agents, strong oxidizing agents.
HAZARDOUS DECOMPOSING PRODUCTS	Toxic irritating and/or corrosive gases may be released during a fire: carbon oxides, nitrogen oxides, sulphur oxides.

SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY	Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria.
CHRONIC TOXICITY	Based on the available information, product does not meet criteria for chronic toxicity.
EYE / SKIN IRRITATION	Causes serious eye damage and skin irritation.
SENSITIZATION	Not available.
CARCINOGENICITY	No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY	May damage fertility or unborn child.
MUTAGENICITY	Not available.
Possible delayed effects	N-methyl-2-pyrrolidone: effects may be delayed. Animal studies show adverse effects to liver and kidneys.

SECTION 12 – ECOLOGICAL INFORMATION
ECO TOXICITY	Aquatic Toxicity
*N-methyl-2-pyrrolidone (CAS 872-50-4)*
Acute Toxicity	Crustacea
	Algae
	Crustacea
	Fish
Test	LC₅₀
	EC₅₀
	EC₅₀
	LC₅₀
Species	Palaemonetes vulgaris
	Scenedesmus subspicatus
	Daphnia magna
	Oncorhynchus mykiss
Test Results	1107 mg/l, 96 hours
	> 500 mg/l, 72 hours
	> 1000 mg/l, 24 hours
	> 500 mg/l, 96 hours
Chronic Toxicity	Crustacea
Test	LC₅₀
Species	Daphnia magna
Test Results	25 mg/l, 21 days
*Propylene Glycol (CAS 57-55-6)*
Acute Toxicity	Crustacea
Test	LC₅₀
Species	Ceriodaphnia
Test Results	18340 mg/l, 48 hours
Persistence and Degradability	This product is not readily biodegradable.
Bioaccumulation potential	Not available.
*Partition coefficient n-octanol / water (log Kow)*
N-methyl-2-pyrrolidone (CAS 872-50-4)	-0.54
Propylene Glycol (CAS 57-55-6)	-0.92
Ethylene Glycol (CAS 107-21-1)	-1.36
Mobility in soil	Product is water soluble and may move through soil.

SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL	Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. Do not allow this product to enter drains or drinking water sources.

SECTION 14 – TRANSPORT INFORMATION
SHIPPING	TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. IATA: Not regulated as dangerous goods. IMDG: Not regulated as dangerous goods.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).
US federal regulations:
All components of this product are listed on the U.S. EPA TSCA Inventory.
N-(n-butyl)-thiophosphoric triamide (NBPT) is subject to a Significant New Use Rule (SNUR) codified in 40 CFR 721.6090
Canadian federal regulations: All components if this product listed on Canada’s DSL Inventory.

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.
Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.
The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Downloads

Label SDS

Feeding Calculator Australia

Feeding Calculator

Calculate

ARM U™ 16% DMPP