Active Copper Zinc™

A foliar micronutrient fertiliser solution to correct copper, zinc, and sulfur deficiencies during active growth stage.

Description

Active Copper Zinc™ is a foliar-applied, copper-zinc-sulfur fertiliser solution designed to alleviate nutrient deficiencies that can reduce crop yields. Powered by Active AgriScience’s proprietary bioactive complex TSMC, Active Copper Zinc improves nutrient absorption and utilization efficiency while also enhancing stress mitigation. This formula ensures optimal levels of these micronutrients, crucial for robust and vigorous plant growth.

When to Use

As indicated by soil analysis, throughout the growing cycle.

For the best results, use the complete line of recommended Active AgriScience™ products for your crop.

Benefits

Active Copper Zinc supports:

  • Disease and stress resistance
  • Enzymatic processes
  • Stem length and leaf size
  • Photosynthesis
  • Production of indoleacetic acid
  • Structural strength
  • Mitochondrial respiration
  • Pollen viability
  • Carbohydrate & protein metabolism

Label

5.2% Cu 6.5% Zn 10.4% S

HELPS CORRECT COPPER, ZINC, AND SULFUR DEFICIENCIES

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. Apply at the rate of 1.25 L / ha with a minimum of 100 L of water / ha. Ensure sufficient water for thorough coverage. Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilisers. Suitable for ground or aerial spraying.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: Compatible with UAN/Flexi-N and most other agricultural chemicals and fertilisers. A compatibility test is recommended if the desired combination has not been previously used. Add tank mix components in the following order: Water, agrochemical, Active Copper Zinc™. Keep agitator running while mixing and spraying.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

ANALYSIS (W/V%):

  • Copper (Cu) (actual): 5.2%
  • Zinc (Zn) (actual): 6.5%
  • Sulfur (S): 10.4%

Harmful irritant Harmful or Fatal
Environment

DANGER HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. TOXIC IF SWALLOWED. TOXIC TO AQUATIC LIFE.

CAUTION: THIS FERTILISER CONTAINS COPPER AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of contents/container in accordance with Federal, provincial and local regulations.

FOR CHEMICAL EMERGENCY CALL: +1800 039 008 and refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.


Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Compatibility

Compatible with most pesticides and fertilisers. A compatibility test is recommended if the desired combination has not been previously used.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active Copper Zinc

PRODUCT USE

Agricultural micronutrient fertiliser

MANFACTURERS NAME

Opal Australasia

ADDRESS

7 Yeates Road, Kwinana Beach, WA 6167, Australia

DATE

Feb. 28, 2024

EMERGENCY TELEPHONE

+1800 039 008

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

 

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

HPR (WHMIS 2015)

Acute Toxicity Oral: Category 3

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

OSHA Hazard Communication Standard (29 CFR 1910.1200)

Acute Toxicity Oral: Category 3

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

WHMIS Pictogram Exclamation

WHMIS Pictogram Skull and Crossbones

DANGER

HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. TOXIC IF SWALLOWED.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well-ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

 

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Copper Sulphate

7758-99-8

12-16%

Zinc Sulphate

7446-19-7

12-16%

 

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.

Most Important Symptoms, both acute & delayed

May cause eye and skin irritation. Toxic if swallowed.

 

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic sulfur oxides and toxic metallic fumes are released during a fire or when product is heated to decomposition.

 

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

 

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

 

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

NIOSH: REL 10 hr TWA 1 mg/m3 / Copper (dusts and mists)

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

Wear chemical resistant gloves, clothing, and face protection when handling or applying this product.

Eyes

Wear chemical resistant goggles when handling or applying this product

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

 

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Bright blue

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Very soluble

APPEARANCE

Bright blue liquid

VISCOSITY

Not viscous

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.25 – 1.35 kg/L

pH

1.5 – 2.5

ODOUR THRESHHOLD

NAV

 

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Strong acids and strong bases.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic sulfur oxides and metallic fumes are released during a fire or when heated to decomposition.

 

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Copper sulphate pentahydrate: 7733-02-0: LD50 (oral, mouse) 245 mg / kg.

LD50
(oral, rabbit) 2 g / kg.

CHRONIC TOXICITY

Prolonged or repeated skin exposure can lead to dermatitis.

EYE / SKIN IRRITATION

May cause eye and skin irritation.

SENSITIZATION

May cause skin sensitization.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Not available.

MUTAGENICITY

Some evidence in vitro lymphocyte human cells (RTECS).

 

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Very harmful to aquatic life in low concentrations with possible long-term effects.

 

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

 

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

 

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

 

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Downloads

Feeding Calculator Australia

Feeding Calculator

Calculate

Find a Sales Rep

Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.