Proform N™

The nutrient content in Proform N™ supports photosynthesis and the production of proteins for stronger, healthier crops.

Category: Foliar Nutrients Tags: Grains, Oilseeds, Pulses, Vegetables

Description

Proform N™ can be applied as a foliar spray and is specially formulated to allow better nitrogen absorption.

When to Use

Apply during the early growth phase (herbicide timing) and after pollination (fungicide timing).

Benefits

Proform N™ provides both readily available nitrogen as well as slow release nitrogen, delivering both quick and long-lasting nutrition.

Nitrogen is essential for plant life and growth and is therefore a component of many fertilisers. Proform N™ provides both readily available and slow release nitrogen, allowing it to be absorbed through the plant leaves efficiently. Proform N™ is also specially formulated to protect leaves from burning.

Increased Chlorophyll

By allowing the absorption of nitrogen, the development of chlorophyll is supported, fostering photosynthetic energy production and storage for increased growth.

Increased Protein

Increased nitrogen absorption supports the production of plant proteins, including DNA and RNA, allowing plants to manifest their full genetic potential.

Supported Growth

By supporting the production of chlorophyll, protein and nucleic acids, Proform N helps support plant growth.

How it Works

The amino acids and urea nitrogen in Proform N™ provide for easy foliar absorption without leaf burn and allow more nitrogen to be absorbed through the plant leaves and translocate into nitrogen demanding tissues.

While Active AgriScience stands behind the quality of our products, Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Label

29-0-0

PROMOTING HEALTHIER CROP GROWTH

Proform N™ is an excellent source of foliar nitrogen that does not affect leaf tissues.

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. DIRECTIONS FOR USE: Wheat, canola, soybean, peas, lentils and other pulses, corn, potato, flax: Apply as a foliar spray at 2.5 L / ha with a minimum of 100 L of water / ha. Apply during the early growth phase (herbicide timing) and after pollination (fungicide timing). Spray early in the morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C. Avoid spraying on windy days.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program. This product may be tank mixed with pesticides. In some cases, tank mixing with pest control products can result in reduced pesticide efficacy or increased host crop injury. The user should contact the company responsible for the pest control product before applying any tank mix.

COMPATIBILITY: This product is compatible with most pesticides and fertilisers. If compatibility is uncertain, conduct a jar test before use.
Mix with other products in the following order: Water, Agrochemical, Proform N™. Keep agitator running while mixing and spraying.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

ANALYSIS (W/V%):

Total Nitrogen (N): 29%
Magnesium (Mg): 0.17%

CAUTION: THIS FERTILISER CONTAINS IRON AND MAGNESIUM AND SHOULD BE USED ONLY AS RECOMMENDED. It may prove harmful when misused. Product contains soy in the form of hydrolyzed soybean meal. Adverse reactions may occur in sensitive persons. If allergic reaction occurs, seek medical attention.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. Wear dust mask and protective gloves. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Wash skin with soap and water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

FOR CHEMICAL EMERGENCY: Call +1800 039 008 or refer to SDS.

made in australia

For product inquiries visit activeagriscience.com.
Formulated and manufactured in Australia.

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Independent 3rd Party Yield Data

WHEAT • 2 YEAR AVERAGE YIELD DATA *

kg/ha

5000

4500

4000

3500

3000

2500

2000

1500

1000

500

3925

4090

165

kg/ha

Control

Proform N

TREATMENT	Check (kg/ha)	Proform N™ (kg/ha)
YIELD 2017	4236	4411
YIELD 2018 Ag-Quest	5016	5225
YIELD 2018 New Era Ag	2521	2636
2 YEAR AVERAGE	3925	4090
% CHANGE		4.2%

*3rd party field research with Ag-Quest, and New Era Ag.

CANOLA • 2 YEAR AVERAGE YIELD DATA *

kg/ha

5000

4500

4000

3500

3000

2500

2000

1500

1000

500

2379

2505

126

kg/ha

Control

Proform N

TREATMENT	Check (kg/ha)	Proform N™ (kg/ha)
YIELD 2016	1524	1748
YIELD 2017	3233	3261
2 YEAR AVERAGE	2379	2505
% CHANGE		5.3%

*3rd party field research with Ag-Quest, and New Era Ag.

SOYBEAN • 2017 AVERAGE YIELD DATA *

kg/ha

5000

4500

4000

3500

3000

2500

2000

1500

1000

500

2824

3046

222

kg/ha

Control

Proform N

TREATMENT	Check (kg/ha)	Proform N™ (kg/ha)
2017 AVERAGE	2824	3046
% CHANGE		7.9%

*3rd party field research with Ag-Quest, and New Era Ag.

PEAS • 2018 AVERAGE YIELD DATA *

kg/ha

5000

4500

4000

3500

3000

2500

2000

1500

1000

500

3248

3446

198

kg/ha

Control

Proform N

TREATMENT	Check (kg/ha)	Proform N™ (kg/ha)
YIELD 2018 Ag-Quest	2353	2690
YIELD 2018 New Era Ag	4142	4202
AVERAGE	3248	3446
% CHANGE		6.1%

*3rd party field research with Ag-Quest, and New Era Ag.

Compatibility

Compatible with most fungicides, herbicides, pesticides, and fertilisers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

Proform N COMPATIBILITY WITH PESTICIDES

Proform N COMPATIBILITY WITH FUNGICIDES
COMPATIBLE
Acapela
Caramba
Delaro
Folicur 250 EC
Headline EC
Priaxor
Proline 480 SC
Agsurf or Agral 90
Prosaro 250 EC
Quadris
Quilt
Rovral FLO
Tilt 250E
Twinline
Vertisan
CAUTION
Allegro
Bravo 500
Dithane
Lance WDG
Quash
INCOMPATIBLE
Astound
NOT TESTED
Fuse
Kumulus DF
Serenade Max
Serenade CPB

Proform N COMPATIBILITY WITH INSECTICIDES
COMPATIBLE
Coragen
Decis
Diazanon
Lorsban
Malathion
Matador
Pounce
CAUTION
Furadan
Sevin XLR+
NOT TESTED
Cygon/Lagon
Lannate
Ripcord

Proform N WITH ACTIVE AGRISCIENCE PRODUCTS

COMPATIBLE
Active PRIME
Active BUILD
Active FLOWER
Active COMPLETE
Active KONNECT
Active BORON
Active COPPER
Active MANGANESE
Active ZINC

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER	Proform N
PRODUCT USE	Agricultural fertiliser
MANFACTURERS NAME	Opal Australasia
ADDRESS	7 Yeates Road, Kwinana Beach, WA 6167, Australia
DATE	May 16, 2024
EMERGENCY TELEPHONE	+1800 039 008
PREPARED BY	Active AgriScience Inc.
USE RESTRICTIONS	For professional use only. Use only as labeled.
DISTRIBUTORS NAME
STREET ADDRESS
CITY
POSTAL CODE
COUNTRY
EMERGENCY TELEPHONE

SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION	Based on the available information, this material is not considered hazardous by HPR (WHMIS 2015) or the OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

Contains no hazardous ingredients ≥ to 0.1%.

SECTION 4 – FIRST AID MEASURES
EYE CONTACT	Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.
SKIN CONTACT	Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.
INHALATION	Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.
INGESTION	Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.
Most Important Symptoms, both acute & delayed	No known adverse effects. Treat symptomatically.

SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE	Product will not burn or support combustion.
MEANS OF EXTINCTION	Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD	NAP
UPPER FLAMMABLE LIMIT	NAP
LOWER FLAMMABILITY LIMIT	NAP
AUTO IGNITION TEMPERATURE	NAP
SENSITIVITY TO IMPACT	NAP
SENSITIVITY TO STATIC DISCHARGE	NAP
HAZARDOUS COMBUSTION PRODUCTS	Carbon monoxide, carbon dioxide, nitrogen oxides (NOx).

SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES	Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE
HANDLING	Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE	KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS	Not available.
ENGINEERING CONTROLS	Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.
PERSONAL PROTECTIVE EQUIPMENT
Skin	The use of protective gloves is recommended when handling or applying this product.
Eyes	The use of eye protection is recommended when handling or applying this product.
Respirator	If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE	Liquid
COLOUR	Amber
BOILING POINT	NAV
EVAPORATION RATE	NAV
ODOUR	NAV
SOLUBILITY IN WATER	Soluble
APPEARANCE	Amber coloured liquid
VISCOSITY	NAV
FREEZING POINT	NAV
SPECIFIC GRAVITY	1.13 g/cm³
pH	5.0 – 6.0
ODOUR THRESHHOLD	NAV

SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY	Stable under normal conditions of use and storage.
INCOMPATIBLE WITH OTHER SUBSTANCES	Not available.
HAZARDOUS DECOMPOSING PRODUCTS	Carbon monoxide, carbon dioxide, nitrogen oxides (NOx).

SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY	Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria.
CHRONIC TOXICITY	Based on the available information, product does not meet criteria for chronic toxicity.
EYE / SKIN IRRITATION	Not available.
SENSITIZATION	Not available.
CARCINOGENICITY	No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY	Not available.
MUTAGENICITY	Not available.

SECTION 12 – ECOLOGICAL INFORMATION
ECOTOXICITY	Not available.

SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL	Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Downloads

Label SDS

Feeding Calculator

Calculate

Proform N™