Foliar Nutrients, Macronutrients, Products

Active PULSE™

Active PULSE™ enhances pollen development, fertilization, and yield of peas, lentils, soybeans.

Register for a commercial account to get access to wholesale products and prepaid shipping. If you are already have an account, please login.

* Use the feeding calculator to help you determine the amount of product you require.

Calculator

Description

Enhances pollen development, fertilization, and yield of peas, lentils, soybeans.

Active PULSE™ enhances pollen development, fertilization, and yield of peas, lentils, soybeans and other beans. It improves pollen hydration, germination, pollen tube growth and viability. Active PULSE™ encourages bee foraging activity which increases fertilization. Plants produce more fruit sets and an increased number of larger, more uniform and higher quality pods and seeds, ultimately resulting in greater yields.

When to Use

Soybean, peas, lentils and other pulse crops: apply once at the pre-bloom – 30% bloom stage.

Guaranteed Minimum Analysis

Total Nitrogen (N): 8%
Available Phosphate (P₂O₅): 4%
Soluble Potash (K₂O): 12%
Boron (B)(actual): 2.0%

*Third Party Analysis by Mid-West Labs

How it Works

Active PULSE™ contains nitrogen in the form of amine and micronutrients to maintain high enzymatic and hormonal activity during the reproductive phase of plant growth.

Potassium is provided to regulate anther dehiscence, pollen hydration/imbibition, and pollen tube growth, needed for successful fertilization, and to promote uniform fruit size and quality.

Easy to absorb and penetrate through membranes where it is needed, a boron-amine complex fosters pollen viability, seed set, carbohydrate and nucleic acid metabolism, cell differentiation and maturity, sugar transport, uptake of calcium, magnesium, potassium, synthesis of cytokinins, translocation of auxins, and root tip initiation.

The polyamine complex aids in pollen germination, hydration, viability, pollen tube growth, accumulation of secretory vesicles in pollen tubes, and fertility. It also attracts bees, minimizes abortive flowers, and increases yield.

Directions

ALWAYS READ LABEL BEFORE USE. SHAKE WELL BEFORE USING.

Application Rate

General Crop Use: apply at fungicide timing as a foliar spray using 2.5 L per hectare (1 L per acre) with between 50 – 100 L water per hectare (20 – 40 L / acre) for ground applications and 30 – 60 L of water per hectare (12 – 24 L / acre) for aerial applications. Allow a minimum of 3 weeks between applications.

Soybean, peas, lentils and other pulse crops: apply once at the pre-bloom – 30% bloom stage.

Weight	13.62 kg
Dimensions	10 × 6 × 14 in
Volume	10 Litre, 100 Litre, 500 Litre, 1000 Litre

SDS

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER	Active PULSE^TM 8-4-12
PRODUCT USE	Agricultural Fertilizer
MANFACTURERS NAME	Active AgriScience Inc.
STREET ADDRESS	3422 Millar Ave
CITY	Saskatoon
POSTAL CODE	S7K 5Y7
DATE	Sept. 24^th 2020
PROVINCE	Saskatchewan, Canada
EMERGENCY TELEPHONE	1-639-398-0485
PREPARED BY	Active AgriScience Inc.
USE RESTRICTIONS	For professional use only. Use only as labeled.
SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION
HPR (WHMIS 2015)	Reproductive toxicity: Category 1B
OSHA Hazard Communication Standard (29 CFR 1910.1200)	Reproductive toxicity: Category 1B
DANGER	HAZARD STATEMENTS: Contains Boron: May damage fertility or the unborn child. PRECAUTIONARY STATEMENTS: Do not breathe mists/ spray. Obtain special instructions before use. FIRST AID: If exposed or concerned call a POISON CENTRE/doctor. STORAGE: Store locked-up in a cool, dry, well-ventilated area. Do not freeze. DISPOSAL: Dispose of contents and container in accordance with Federal, State, and Local regulations.
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
HAZARDOUS INGREDIENTS	Borax
CAS#	1330-43-4
CONCENTRATION	10 – 30%
SECTION 4 – FIRST AID MEASURES
EYE CONTACT	Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Consult a doctor if concerned
SKIN CONTACT	Flush skin with plenty of water. Remove contaminated clothing. Consult a doctor if concerned.
INHALATION	Move victim to fresh air. Allow the victim to rest in a well-ventilated area. Consult a doctor if concerned.
INGESTION	Never give anything by mouth to an unconscious person. Rinse mouth. DO NOT induce vomiting without physician’s direction. If vomiting occurs naturally, have victim lean forward with head down to avoid breathing in vomit. Consult a doctor if concerned.
Most Important Symptoms, both acute & delayed.	Contains Boron: May damage fertility or the unborn child.
SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE	Product will not burn or support combustion.
MEANS OF EXTINCTION	Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD	NAP
AUTO IGNITION TEMPERATURE	NAP
UPPER FLAMMABLE LIMIT	NAP
SENSITIVITY TO IMPACT	Not sensitive.
LOWER FLAMMABILITY LIMIT	NAP
SENSITIVITY TO STATIC DISCHARGE	Not sensitive.
HAZARDOUS COMBUSTION PRODUCTS	Toxic, irritating and/ or corrosive gases may be released during a fire.
SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES	Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment.
SECTION 7 – HANDLING AND STORAGE
HANDLING	Wear personal protective equipment in SECTION 8. Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. If mists are present and ventilation is poor or absent, wear an air purifying respirator. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE	KEEP OUT OF REACH OF CHILDREN. Store locked up cool, dry, well ventilated area away from food or feed storage.
INCOMPATIBLE MATERIALS	Not available.
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS	Not available.
ENGINEERING CONTROLS	Ensure adequate ventilation when handling or applying this product. Follow all label instructions. If mists are present and ventilation is absent or poor, use an air purifying respirator.
PERSONAL PROTECTIVE EQUIPMENT
Skin	Wear chemical resistant gloves when handling or applying product.
Eyes	Wear safety glasses or safety goggles when handling or applying product.
Respirator	Use an approved air purifying respirator if mists are present and ventilation is absent or poor.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE	Liquid
VISCOSITY	Not available
EVAPORATION RATE	Not available
APPEARANCE	Not available
BOILING POINT	Not available
SPECIFIC GRAVITY	1.3-1.35 g/cm³
COLOUR	Pale yellow
FREEZING POINT	Not available
ODOUR	Not available
PH	8.2 – 8.8
SOLUBILITY IN WATER	Fully soluble in water
ODOUR THRESHHOLD	Not available
SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY	Stable under normal conditions of use and storage.
INCOMPATABILITY WITH OTHER SUBSTANCES	Not available.
HAZARDOUS DECOMPOSITION PRODUCTS	Toxic and/or irritating gases may be released during a fire.
SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY	Acute Oral: does not meet criteria. Acute Dermal: does not meet criteria.
CHRONIC TOXICITY	Not available.
EYE / SKIN IRRITATION	Not available.
SENSITIZATION	Not available.
CARCINOGENICITY	No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY	Boron exposure may damage fertility or the unborn child.
MUTAGENICITY	Not available.
SECTION 12 – ECOLOGICAL INFORMATION
ECOTOXICITY	Not available.
SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL	Dispose of this product and its container in accordance with Federal, State, Provincial and Local regulations.
SECTION 14 – TRANSPORT INFORMATION
SHIPPING	TDG: not a dangerous good for transport. DOT: not a dangerous good for transport.
SECTION 15 – REGULATORY INFORMATION
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).
SECTION 16 – OTHER INFORMATION
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, and health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Compatibility

This product is compatible with most fertilizers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use.

Add tank-mix partners in the following order: Water, Agrochemical, Active PULSE™.

COMPATIBLE		✓
CAUTION		!
NOT COMPATIBLE		✘
NOT TESTED		?

Active PULSE with Pesticides
Active PULSE with Fungicides
Acapela		✓
Allegro		!
Astound		✘
Bravo		✓
Caramba		✓
Delaro		✓
Dithane		✓
Folicur 250 EC		✓
Fuse		?
Headline EC		✓
Kumulus DF		?
Lance WDG		!
Priaxor		✓
Prosaro 250 EC		✓
Quadris		✓
Quash		✓
Quilt		✓
Rovral Flo		✓
Serenade Max		?
Serenade CPB		?
Tilt		✓
Twinline		✓

Active PULSE with Insecticides
Coragen		✓
Cygon/Lagon		?
Decis		✓
Diazanon		✓
Furadan		!
Lannate		✓
Lorsban		✓
Malathion 85E		✓
Malathion 500		✓
Matador		✓
Pounce		✓
Ripcord		✓
Sevin XLR Plus		✓

Active PULSE with Tank Mixtures
Compatible Tank Mix #1
Agchem 1	Odyssey Ultra Herbicide Mix:308 ml / 40 ml water
Surfactant/Adjuvant	Merge™ Adjuvant:200ml / 40L water
Fertilizer	Active PULSE: 1L /40L water
Agchem Water	5 GPA

Compatible Tank Mix #2
Agchem 1	Cotegra™ Fungicide:0.24L / ac
Fertilizer	Active PULSE: 0.5 L / ac
Agchem Water	10 GPA

Compatible Tank Mix #3
Agchem 1	AXIAL® XTREME Herbicide:2.5ml / 100ml water
Fertilizer	Active PULSE: 1L /40L water
Agchem Water	5 GPA

Compatible Tank Mix #4
Agchem 1	Miravis Bold (SC): 0.4 L / acre
Agchem 2	Agral 90 (ADJ): 0.125% v/v
Fertilizer	Active PULSE (Lfert): 1L / acre
Carrier Rate	10 GPA

Compatible Tank Mix #5
Agchem 1	Miravis Neo (SE): 0.5 L / acre
Fertilizer	Active PULSE (Lfert): 1L / acre
Carrier Rate	10 GPA

Active PULSE with Active AgriScience Products

Active PRIME		✘
Active BUILD		✘
Active COMPLETE		✘
Active KONNECT		✓
Proform N		✓
Active BORON		✓
Active COPPER		✓
Active MANGANESE		✘
Active ZINC		✘

Research

Science & Research

TAILORED FORMULA SPECIFIC TO PULSES:

More economical formula compared to other nutrient solutions tailored specifically to the enhance the pollination and fertilization of peas, lentils, soybeans and other beans.

INCREASED POLLEN TUBE GROWTH:

Pollen tube growth is essential for sexual reproduction to occur in plants. Active PULSE™ contains nitrogen, potassium, and a polyamine complex to support pollen tube growth and accumulation of secretory vesicles in pollen tubes.

INCREASED FERTILIZATION:

Active PULSE™ helps regulate anther dehiscence and pollen hydration. It also increases pollen volume and viability while the polyamines present in Active PULSE™ help attract bees, resulting in greater fertilization and minimal abortive flowers.

INCREASED SIZE AND QUALITY OF FRUITS, PODS AND SEEDS:

Active PULSE™ increases fertilization and supports carbohydrate and nucleic acid metabolism, sugar transport, cell differentiation and maturation. This results in a higher volume of larger, more uniform, high quality fruits, pods, and seeds.

INCREASED NUTRIENT MOBILIZATION AND ABSORPTION:

Active PULSE™ boosts the uptake of calcium, magnesium, and potassium.

INCREASED PERFORMANCE UNDER STRESS CONDITIONS:

Active PULSE™ benefits are unaffected by unfavourable conditions. It maintains the ability to simultaneously upregulate desirable pathways and downregulate undesirable pathways, allowing plants to maximize their genetic potential under cold, wet or drought conditions.

Label

8-4-12

SUPPORTING POLLINATION & FERTILIZATION OF PULSE CROPS

Enhances pollen development, fertilization, and yield of peas, lentils, soybeans.

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

DIRECTIONS: SHAKE WELL BEFORE USING.

Soybean, peas, lentils and other pulse crops: apply once at the pre-bloom – 30% bloom stage.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: This product is compatible with most fertilizers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use. Add tank-mix partners in the following order: water, agrochemical, Active PULSE™.

PHYTOTOXICITY: For crops not listed on this label, always test a small plot prior to commercial application and observe for 7-10 days for symptoms of phytotoxicity.

GUARANTEED MINIMUM ANALYSIS:

Total Nitrogen (N): 8%
Available Phosphate (P₂O₅): 4%
Soluble Potash (K₂O): 12%
Boron (B)(actual): 2.0%

DANGER HAZARD STATEMENTS: CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

CAUTION: THIS FERTILIZER CONTAINS BORON AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Wear protective gloves / protective clothing / eye protection / face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up cool, dry, well ventilated area away from food or feed storage.

DISPOSAL: Dispose of contents / container in accordance with Federal, Provincial and Local regulations.

FOR CHEMICAL EMERGENCY CALL: 1-639-398-0485.

LIMITED WARRANTY: Manufacturer warrants that this material conforms to the chemical description on the label and is reasonably fit for use as directed. To the extent permitted by law, no other warranty, or warranty of merchantability is made, either expressed or implied.

made in canada

Manufactured by Active AgriScience Inc.:
3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Active PULSE™