
Active Magnesium
A foliar-applied magnesium fertilizer solution that can alleviate nutrient deficiencies in crops.
A foliar-applied magnesium fertilizer solution that can alleviate nutrient deficiencies in crops.
Active Magnesium™ contains 4% magnesium, a vital component in chlorophyll production and a key nutrient for phosphorus uptake. It also supports cell division, stabilizes cell membranes, and plays an important role in plant respiration.
As indicated by soil or tissue analysis. Magnesium deficiency is often more likely in sandy or acidic soils, or when calcium or potassium levels are high. Use during vegetative growth to support strong leaf development and nutrient use efficiency.
Magnesium is mobile in the plant, so deficiency symptoms typically appear in older leaves first. Foliar application of magnesium can quickly address deficiencies and help prevent yield loss, especially in fast-growing crops or under stress conditions. Active Magnesium also supplies nitrogen, phosphorus, and boron to further support early plant development and nutrient balance.
Although magnesium is required in smaller quantities than primary nutrients, it is essential for photosynthesis and energy transfer. Active Magnesium provides a fast-acting foliar solution to correct magnesium deficiencies and promote healthy, vigorous growth. Can also be used in tank mixes with other compatible fertilizers.
Active Magnesium Supports:
2-12-0 + 4% Mg
HIGH MAGNESIUM FERTILIZER
A foliar-applied magnesium fertilizer solution that can alleviate nutrient deficiencies in crops.
DIRECTIONS FOR USE: Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilizers. Suitable for ground or aerial spraying.
Wheat, canola, soybean, corn, potatoes, peas, lentils and other pulse crops: apply at the rate of 1.25 L – 2.5 L / ha (0.5 L – 1 L / acre) with a minimum of 40 L of water. Ensure sufficient water for thorough coverage.
Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program. This product may be tank mixed with pesticides. In some cases, tank mixing with pest control products can result in reduced pesticide efficacy or increased host crop injury. The user should contact the company responsible for the pest control product before applying any tank mix.
COMPATIBILITY: Compatible with most pesticides and fertilizers. A compatibility test is recommended if the desired combination has not been previously used.
Add tank mix components in the following order: Water, agrochemical, Active Magnesium™ 4% Mg. Keep agitator running while mixing and spraying.
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
GUARANTEED MINIMUM ANALYSIS:
Fertilizers in the mixture are exempt from registration.
DANGER HAZARD STATEMENTS:CAUSES SERIOUS EYE DAMAGE. CAUSES SKIN CORROSION.
CAUTION: THIS FERTILIZER CONTAINS BORON AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED. STORE IN A COOL, DRY AREA. DO NOT FREEZE.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.
For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
Net weight:
13.7 kg (30.2 lbs)
Net contents:
10 L (2.6 gal)
SECTION 2 – HAZARDS IDENTIFICATION | |
GHS CLASSIFICATION | |
HPR (WHMIS 2015) | Eye Damage / Irritation: Category 1
Skin Corrosion / Irritation: Category 1 |
OSHA Hazard Communication Standard (29 CFR 1910.1200) | Eye Damage / Irritation: Category 1
Skin Corrosion / Irritation: Category 1 |
DANGER |
HAZARD STATEMENTS: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well- ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS | ||
INGREDIENTS | CAS# | CONCENTRATION |
Phosphoric acid | 7664-38-2 | 12–20% |
Boric acid | 10043-35-3 | 0.1–0.5% |
SECTION 4 – FIRST AID MEASURES | |
EYE CONTACT | Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. |
SKIN CONTACT | Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. |
INHALATION | Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. |
INGESTION | Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. |
Most Important Symptoms, both acute & delayed | Causes severe skin burns and eye damage. |
SECTION 5 – FIRE FIGHTING MEASURES | |
FLAMMABLE | Product will not burn or support combustion. |
MEANS OF EXTINCTION | Use extinguishing methods appropriate for the surrounding fire. |
FLASHPOINT & METHOD | NAP |
UPPER FLAMMABLE LIMIT | NAP |
LOWER FLAMMABILITY LIMIT | NAP |
AUTO IGNITION TEMPERATURE | NAP |
SENSITIVITY TO IMPACT | NAP |
SENSITIVITY TO STATIC DISCHARGE | NAP |
HAZARDOUS COMBUSTION PRODUCTS | Toxic, irritating and/or corrosive gases may be released during a fire. |
SECTION 6 – ACCIDENTAL RELEASE MEASURES | |
LEAK & SPILL PROCEDURES | Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
SECTION 7 – HANDLING AND STORAGE | |
HANDLING | Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
STORAGE | KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well-ventilated area away from food or feed storage. DO NOT FREEZE. |
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION | |
EXPOSURE LIMITS | Not available. |
ENGINEERING CONTROLS | Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
PERSONAL PROTECTIVE EQUIPMENT | |
Skin | Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently. |
Eyes | Wear chemical resistant goggles when handling or applying this product. |
Respirator | If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product. |
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE | Liquid |
COLOUR | Light blue |
BOILING POINT | NAV |
EVAPORATION RATE | NAV |
ODOUR | NAV |
SOLUBILITY IN WATER | Soluble |
APPEARANCE | Light blue liquid |
VISCOSITY | NAV |
FREEZING POINT | NAV |
SPECIFIC GRAVITY | 1.37-1.38 g/cm3 |
pH | 1.5 – 2 |
ODOUR THRESHHOLD | NAV |
SECTION 10 – STABILITY AND REACTIVITY | |
CHEMICAL STABILITY | Stable under normal conditions of use and storage. |
INCOMPATIBLE WITH OTHER SUBSTANCES | Not available. |
HAZARDOUS DECOMPOSING PRODUCTS | Toxic irritating and/or corrosive gases may be released during a fire. |
SECTION 11 – TOXICOLOGICAL INFORMATION | |
ACUTE TOXICITY | Acute Oral: Does not meet criteria.
Acute Dermal: Does not meet criteria. |
CHRONIC TOXICITY | Based on the available information, product does not meet criteria for chronic toxicity. |
EYE / SKIN IRRITATION | Causes severe skin burns and eye damage. |
SENSITIZATION | Not available. |
CARCINOGENICITY | No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
REPRODUCTIVE TOXICITY | Not available. |
MUTAGENICITY | Not available. |
SECTION 12 – ECOLOGICAL INFORMATION | |
ECOTOXICITY | Not available. |
SECTION 13 – DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL | Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
SECTION 14 – TRANSPORT INFORMATION | |
SHIPPING | TDG: Not a dangerous good for transport.
DOT: Not a dangerous good for transport. |
SECTION 15 – REGULATORY INFORMATION |
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
SECTION 16 – OTHER INFORMATION |
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.
Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
Determine whether your crop has any nutritional deficiencies that might limit its yield.
With unexpected variables such as soil conditions, weather, pests, diseases, tank mix partners, applications rates, and errors in mixing and application, we encourage all prospective customers to run trials of our products before broad acreage adoption. Please visit our Trial Protocol page to learn more.
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Active AgriScience products are compatible with most pesticides and fertilizers. Please read the Compatibility Guide and conduct pre-testing if a combination has not been previously used.
Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.