Foliar Nutrients, Micronutrients, Products

Active Manganese™

Active Manganese 7% Mn is a foliar-applied manganese fertilizer solution that prevents or corrects micronutrient deficiencies that can reduce crop yields.

Register for a commercial account to get access to wholesale products and prepaid shipping. If you are already have an account, please login.

* Use the feeding calculator to help you determine the amount of product you require.

Calculator

Description

Active MANGANESE™ 7% Mn is a foliar-applied manganese fertilizer solution that prevents or corrects micronutrient deficiencies that can reduce crop yields.

When to Use

As indicated by tissue analysis, throughout the growing cycle. Manganese is not mobile within the plant, so must be continuously available, although in small amounts. Too much manganese is harmful, so tissue analysis testing is necessary. Amounts needed may vary by crop.

 

Benefits

Manganese is essential for strong, healthy growth, and supplementing manganese is particularly beneficial in small grains, soybeans, sweet corn, and vegetable crops. It supports root growth, photosynthesis, pollination, respiration, and disease and stress resistance.

For the best results, use the complete line of recommended Active AgriScience™ products for your crop.

  • Wheat: Active Prime™, Active Build™, Active Complete™, Proform N™, Active Konnect™, Micronutrients as needed.
  • Corn, Hops: Active Prime™, Active Build™, Active Flower™, Active Complete™, Proform N™, Micronutrients as needed.
  • Canola, Soybean, Pulses, Tomatoes, Vegetables: Active Prime™, Active Build™, Active Flower™, Proform N™, Active Konnect™, Micronutrients as needed.
  • Tree Fruit, Tree Nuts: Active Build™, Active Flower™, Active Complete™, Proform N™, Active Konnect™, Micronutrients as needed.
  • Berries: Active Build™, Active Flower™, Proform N™, Active Konnect™, Micronutrients as needed.

 

Guaranteed Minimum Analysis

  • Manganese (Mn)(actual): 7%
  • Sulfur (S): 4%

*Third Party Analysis by Mid-West Labs

Directions

Directions

Application Rate

Wheat, Canola, soybean, corn, potatoes, peas, lentils and other pulse crops: apply at the rate of 1.25 L – 2.5 L / ha (0.5 L – 1 L / acre) with a minimum of 40 L of water. Ensure sufficient water for thorough coverage.

Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilizers. Suitable for ground or aerial spraying.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

Directions

Directions

Application Rate

Wheat, Canola, soybean, corn, potatoes, peas, lentils and other pulse crops: apply at the rate of 0.5 qt – 1 qt / acre with a minimum of 11 L of water. Ensure sufficient water for thorough coverage.

Apply as a foliar treatment in a regular spray program or as a corrective spray to alleviate nutritional deficiencies. Also for use in blended fertilizers. Suitable for ground or aerial spraying.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

SDS

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active MANGANESE 7% Mn

PRODUCT USE

Micronutrient fertilizer.

MANFACTURERS NAME

Active AgriScience Inc.

STREET ADDRESS

3422 Millar Ave

CITY

Saskatoon

POSTAL CODE

S7K 5Y7

DATE

March 31st, 2020

PROVINCE

Saskatchewan, Canada

EMERGENCY TELEPHONE

1-639-398-0485

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

SECTION 2 – HAZARDS IDENTIFICATION

CANADA: WHIMIS 2015

Serious eye damage: Category 1

Acute toxicity, oral: Category 4

USA: OSHA Hazard Communication Standard 2012

Serious eye damage: Category 1

Acute toxicity, oral: Category 4

Health HazardsCorosion

DANGER

HAZARD STATEMENTS

Harmful if swallowed. Causes serious eye damage.

PREAUTIONARY STATEMENTS

Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Wear eye protection / face protection

IF SWALLOWED: Call a POISON CENTRE / doctor if you feel unwell. rinse mouth

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IMMEDIATELY call  a doctor

Disponse of contents / container in accordance with federal, provincial, and municipal regulations

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

 HAZARDOUS INGREDIENTSManganese sulphate monohydrate
CAS#7746-19-7
CONCENTRATION10-30%

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a large gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Seek medical attention if irritation persists.

SKIN CONTACT

Flush skin with plenty of water for 15 minutes. Remove contaminated clothing and wash before reuse. Seek medical attention if irritation persists.

INHALATION

Move victim to fresh air. Allow the victim to rest in a well-ventilated area. If breathing is difficult, give oxygen. If not breathing, give artificial respiration Seek medical attention if irritation persists.

INGESTION

Rinse mouth. Never give anything by mouth to an unconscious person. DO NOT induce vomiting without physician’s direction. If vomiting occurs naturally, have victim lean forward with head down to avoid breathing in vomit, rinse mouth. Seek medical attention if you feel unwell.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

AUTO IGNITION TEMPERATURE

NAP

UPPER FLAMMABLE LIMIT

NAP

SENSITIVITY TO IMPACT

Not sensitive.

LOWER FLAMMABILITY LIMIT

NAP

SENSITIVITY TO STATIC DISCHARGE

Not sensitive.

HAZARDOUS COMBUSTION PRODUCTS

Toxic sulphur oxides and / or manganese oxides can be released during a fire or when product is heated to decomposition.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal.  Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Wear personal protective equipment outlined in SECTION 8. Avoid contact with eyes, skin and clothing.  Wash thoroughly after handling. Remove contaminated clothing and launder before reuse.

STORAGE

Store in a tightly closed container in a cool, dark, well ventilated area away from incompatibles.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ventilation: use local or general ventilation to lower the risk of worker exposure.

PERSONAL PROTECTIVE EQUIPMENT

Skin

Wear chemical resistant gloves, and coveralls when handling or applying this product.

Eyes

Wear chemical goggles or safety glasses with side shields when handling or applying product.

Respirator

Use an approved air purifying respirator if mists are present and ventilation is absent or poor.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid.

VISCOSITY

Not available.

EVAPORATION RATE

Not available.

APPEARANCE

Not available.

BOILING POINT

Not available.

SPECIFIC GRAVITY

1.2 – 1.3 g/cm3

COLOUR

Not available.

FREEZING POINT

Not available.

ODOUR

Not available.

PH

Not available.

SOLUBILITY IN WATER

Soluble.

ODOUR THRESHHOLD

Not available.

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATABILITY WITH OTHER SUBSTANCES

Strong acids and strong bases.

HAZARDOUS DECOMPOSITION PRODUCTS

Toxic sulphur oxides and metallic fumes are released during a fire or when heated to decomposition.

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Zinc sulphate is classified as Category 4 for oral toxicity

(LD50: > 300 ≤ 2000 mg/kg of body weight).

CHRONIC TOXICITY

Prolonged or repeated skin exposure can lead to severe dermatitis. Exposure to high levels of mists can lead to thirst, a metallic taste in the mouth, weakness, fatigue muscular pain and nausea.

EYE / SKIN IRRITATION

Severe eye irritant – may cause eye burns and eye damage. Irritating to skin, respiratory and digestive tracts.

SENSITIZATION

Not available.

CARCINOGENICITY

Not classified or listed by IARC, NTP, or ACGIH as a suspected or probable carcinogen.

REPRODUCTIVE TOXICITY

Some evidence in rats (RTECS).

MUTAGENICITY

Some evidence in microorganisms, rodents and in vitro human cells (RTECS).

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Very harmful to aquatic life in low concentrations with possible long term effects.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, State, Provincial and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG:  Not regulated for transport.

DOT:  Not regulated for transport.

SECTION 15 – REGULATORY INFORMATION

Manganese sulphate is listed on the Canadian DSL and the EPA TSCA lists.

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of the Hazard Products Act and Regulations (WHMIS 2015) and the OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Research

Science & Research

Active MANGANESE™ 7% Mn is a foliar-applied manganese fertilizer solution that prevents or corrects micronutrient deficiencies that can reduce crop yields. Manganese is essential for strong, healthy growth and is particularly beneficial in small grains, soybeans, sweet corn, and vegetable crops. It supports root growth, photosynthesis, pollination, respiration, and stress/disease resistance.

Although micronutrients are needed in smaller quantities than primary and secondary nutrients, they are essential for strong, healthy growth and high yields. Insufficiency of micronutrients in the soil can limit growth, even when all other nutrients are present in adequate amounts. Active BORON™, Active COPPER™, Active MANGANESE™ and Active ZINC™ are foliar applied micronutrients for fast correction of micronutrient deficiencies. Also for use in blended fertilizers.

Active Manganese Supports

  • Strong, healthy growth
  • Small grains, soybeans, sweet corn, and vegetable crops development
  • Root growth, photosynthesis
  • Pollination, respiration, disease and stress resistance

Label

Active-Manganese_(CA)_10L

Compatibility

Compatibility

Compatible with most pesticides and fertilizers. A compatibility test is recommended if the desired combination has not been previously used.

COMPATIBLE
CAUTION!
NOT COMPATIBLE
NOT TESTED?
Active MANGANESE with Active AgriScience Products
Active PRIME
Active BUILD
Active FLOWER
Active COMPLETE
Active KONNECT
Proform N
Active BORON
Active COPPER
Active MANGANESE
Active ZINC

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.