PollinAID™
The nutrient content in PollinAID help enhance pollen development, fertilization, and the production of fruit and berries.
Berries: Apply twice, first application at beginning of 5% bloom stage, second application at beginning of 50% bloom stage.
Fruit and nut trees: Apply once at the 10% bloom stage. Repeat once more at the 50% bloom stage as needed.
PollinAID contains nitrogen in the form of amine and micronutrients to maintain high enzymatic and hormonal activity during the reproductive phase of plant growth.
Potassium is provided to regulate anther dehiscence, pollen hydration/imbibition, and pollen tube growth, needed for successful fertilization, and to promote uniform fruit size and quality.
Easy to absorb and penetrate through membranes where it is needed, a boron-amine complex fosters pollen viability, seed set, carbohydrate and nucleic acid metabolism, cell differentiation and maturity, sugar transport, uptake of calcium, magnesium, potassium, synthesis of cytokinins, translocation of auxins, and root tip initiation.
8-4-12
ENHANCES FRUIT AND BERRY POLLINATION
Contains nutrients to support reproductive growth of crops.
Registration number 2023728M Fertilizers Act.
DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. SHAKE WELL BEFORE USING.
General Crop Use: Apply once at fungicide timing as a foliar spray at 2.5 L per hectare (1 L per acre) with a minimum of 50 L water per hectare (20 L / acre) for ground applications and 30 L of water per hectare (12 L / acre) for aerial applications. Allow a minimum of 3 weeks between applications.
Berry: Apply twice, once beginning at the 5% bloom stage and again beginning at the 50% bloom stage using a minimum of 250 L of water per hectare (100 L/acre).
Fruit and nut trees: Apply once at the 10% bloom stage using a minimum of 300L of water per hectare (120 L / acre). Repeat once more at the 50% bloom stage as needed..
Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program. This product may be tank mixed with pesticides. In some cases, tank mixing with pest control products can result in reduced pesticide efficacy or increased host crop injury. The user should contact the company responsible for the pest control product before applying any tank mix.
COMPATIBILITY: This product is compatible with most fertilizers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use. Add tank-mix partners in the following order: Water, Agrochemical, PollinAID™. Keep agitator running while mixing and spraying.
PHYTOTOXICITY: Always test a small plot prior to commercial application and observe for 7-10 days for symptoms of phytotoxicity.
GUARANTEED MINIMUM ANALYSIS:
DANGER HAZARD STATEMENTS: CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
CAUTION: THIS FERTILIZER CONTAINS BORON, COPPER, IRON, MANGANESE AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.
PRECAUTIONARY STATEMENTS: Wear protective gloves / protective clothing / eye protection / face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
DISPOSAL: Dispose of product / container in accordance with Federal, Provincial, and Local regulations.
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.
For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
Net weight:
13.3 kg (29.3 lbs)
Net contents:
10 L (2.6 gal)
Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.
POLLINAID COMPATIBILITY WITH PESTICIDES |
---|
POLLINAID COMPATIBILITY WITH FUNGICIDES | |||
---|---|---|---|
COMPATIBLE | |||
Acapela | |||
Bravo 500 | |||
Caramba | |||
Delaro 325 SC | |||
Dithane | |||
Folicur 250 EC | |||
Headline EC | |||
Miravis Ace Bold | |||
Priaxor | |||
Proline 480 SC | |||
Prosaro 250 EC | |||
Quadris | |||
Quilt | |||
Rovral Flo | |||
Tilt 250 E | |||
Twinline | |||
Vertisan | |||
CAUTION | |||
Allegro | |||
Lance WDG | |||
Manzate | |||
Quash | |||
INCOMPATIBLE | |||
Astound |
POLLINAID COMPATIBILITY WITH INSECTICIDES | |||
---|---|---|---|
COMPATIBLE | |||
Coragen | |||
Decis | |||
Diazanon | |||
Lannate | |||
Lorsban | |||
Malathion 85E | |||
Malathion 500 | |||
Matador | |||
Pounce | |||
Ripcord | |||
Sevin XLR Plus | |||
CAUTION | |||
Furadan | |||
Sevin XLR |
POLLINAID WITH TANK MIXTURES |
---|
COMPATIBLE TANK MIX #1 | |
---|---|
Agchem | Odyssey Ultra Herbicide Mix: 308 ml / 40 ml water |
Surfactant / Adjuvant | Merge™ Adjuvant: 200ml / 40L water |
Fertilizer | POLLINAID: 1L /40L water |
Water | 5 GPA |
COMPATIBLE TANK MIX #2 | |
---|---|
Agchem | Cotegra™ Fungicide: 0.24L / ac |
Fertilizer | POLLINAID: 0.5 L / ac |
Water | 10 GPA |
COMPATIBLE TANK MIX #3 | |
---|---|
Agchem | AXIAL® XTREME Herbicide: 2.5ml / 100ml water |
Fertilizer | POLLINAID: 1L /40L water |
Water | 5 GPA |
COMPATIBLE TANK MIX #4 | |
---|---|
Agchem 1 | Miravis Bold (SC): 0.4 L / acre |
Agchem 2 | Agral 90 (ADJ): 0.125% v/v |
Fertilizer | POLLINAID (Lfert): 1L / acre |
Carrier Rate | 10 GPA |
COMPATIBLE TANK MIX #5 | |
---|---|
Agchem | Miravis Neo (SE): 0.5 L / acre |
Fertilizer | POLLINAID (Lfert): 1L / acre |
Carrier Rate | 10 GPA |
POLLINAID WITH ACTIVE AGRISCIENCE PRODUCTS |
---|
COMPATIBLE |
---|
Active KONNECT |
Proform N |
Active BORON |
Active COPPER |
INCOMPATIBLE |
---|
Active PRIME |
Active BUILD |
Active COMPLETE |
Active MANGANESE |
Active ZINC |
SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|
PRODUCT IDENTIFIER |
PollinAID 8-4-12 |
PRODUCT USE |
Agricultural fertilizer |
MANFACTURERS NAME |
Active AgriScience Inc. |
STREET ADDRESS |
3422 Millar Avenue |
CITY |
Saskatoon |
POSTAL CODE |
S7K 5Y7 |
July 8, 2021 |
|
PROVINCE |
Saskatchewan, Canada |
EMERGENCY TELEPHONE |
+1 877-715-9305 |
PREPARED BY |
Active AgriScience Inc. |
USE RESTRICTIONS |
For professional use only. Use only as labeled. |
DISTRIBUTORS NAME |
|
STREET ADDRESS |
|
CITY |
|
POSTAL CODE |
|
COUNTRY |
|
EMERGENCY TELEPHONE |
|
SECTION 2 – HAZARDS IDENTIFICATION |
|
GHS CLASSIFICATION |
|
HPR (WHMIS 2015) |
Reproductive toxicity: Category 1B |
OSHA Hazard Communication Standard (29 CFR 1910.1200) |
Reproductive toxicity: Category 1B |
DANGER |
HAZARD STATEMENTS: CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS |
||
INGREDIENTS |
CAS# |
CONCENTRATION |
Borax |
1330-43-4 |
10 – 30% |
SECTION 4 – FIRST AID MEASURES |
|
EYE CONTACT |
Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. |
SKIN CONTACT |
Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. |
INHALATION |
Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. |
INGESTION |
Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. |
Most Important Symptoms, both acute & delayed |
Contains Boron: May damage fertility or the unborn child. |
SECTION 5 – FIRE FIGHTING MEASURES |
|
FLAMMABLE |
Product will not burn or support combustion. |
MEANS OF EXTINCTION |
Use extinguishing methods appropriate for the surrounding fire. |
FLASHPOINT & METHOD |
NAP |
UPPER FLAMMABLE LIMIT |
NAP |
LOWER FLAMMABILITY LIMIT |
NAP |
AUTO IGNITION TEMPERATURE |
NAP |
SENSITIVITY TO IMPACT |
NAP |
SENSITIVITY TO STATIC DISCHARGE |
NAP |
HAZARDOUS COMBUSTION PRODUCTS |
Toxic and / or irritating gases may be released during a fire. |
SECTION 6 – ACCIDENTAL RELEASE MEASURES |
|
LEAK & SPILL PROCEDURES |
Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
SECTION 7 – HANDLING AND STORAGE |
|
HANDLING |
Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
STORAGE |
KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. |
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION |
|
EXPOSURE LIMITS |
Not available. |
ENGINEERING CONTROLS |
Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
PERSONAL PROTECTIVE EQUIPMENT |
|
Skin |
The use of protective gloves is recommended when handling or applying this product. |
Eyes |
The use of eye protection is recommended when handling or applying this product. |
Respirator |
If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product. |
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES |
|
PHYSICAL STATE |
Liquid |
COLOUR |
Pale green |
BOILING POINT |
NAV |
EVAPORATION RATE |
NAV |
ODOUR |
NAV |
SOLUBILITY IN WATER |
Fully soluble |
APPEARANCE |
Pale green liquid |
VISCOSITY |
NAV |
FREEZING POINT |
NAV |
SPECIFIC GRAVITY |
1.32 – 1.38 g/cm3 |
pH |
8.2 – 8.8 |
ODOUR THRESHHOLD |
NAV |
SECTION 10 – STABILITY AND REACTIVITY |
|
CHEMICAL STABILITY |
Stable under normal conditions of use and storage. |
INCOMPATIBLE WITH OTHER SUBSTANCES |
Not available. |
HAZARDOUS DECOMPOSING PRODUCTS |
Toxic and/or irritating gases may be released during a fire. |
SECTION 11 – TOXICOLOGICAL INFORMATION |
|
ACUTE TOXICITY |
Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria. |
CHRONIC TOXICITY |
Based on the available information, product does not meet criteria for chronic toxicity. |
EYE / SKIN IRRITATION |
Not available. |
SENSITIZATION |
Not available. |
CARCINOGENICITY |
No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
REPRODUCTIVE TOXICITY |
Boron exposure may damage fertility or the unborn child. |
MUTAGENICITY |
Not available. |
SECTION 12 – ECOLOGICAL INFORMATION |
|
ECOTOXICITY |
Not available. |
SECTION 13 – DISPOSAL CONSIDERATIONS |
|
WASTE DISPOSAL |
Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
SECTION 14 – TRANSPORT INFORMATION |
|
SHIPPING |
TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. |
SECTION 15 – REGULATORY INFORMATION |
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
SECTION 16 – OTHER INFORMATION |
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.
13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com
Sample ID: PollinAid
Lab Number: 8721856
Date Sampled: 2020‑01‑29
Nitrogen (total) | |
---|---|
Level Found | 7.89 |
Units | % |
Reporting Limit | 0.01 |
Method | MWL WC PROC 55 |
Analyst Date | hns0-2020/02/06 |
Verified Date | tat9-2020/02/07 |
Phosphate (P2O5) | |
---|---|
Level Found | 5.75 |
Units | % |
Reporting Limit | 0.1 |
Method | MWL ME PROC 26 |
Analyst Date | Auto-2020/02/11 |
Verified Date | tat9-2020/02/11 |
Potash (K2O) | |
---|---|
Level Found | 11.5 |
Units | % |
Reporting Limit | 0.05 |
Method | MWL ME PROC 26 |
Analyst Date | ach3-2020/02/11 |
Verified Date | tat9-2020/02/11 |
Boron (total) | |
---|---|
Level Found | 20600 |
Units | ppm |
Reporting Limit | 100 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Sulfur (total) | |
---|---|
Level Found | < 0.05 |
Units | % |
Reporting Limit | 0.05 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Magnesium (total) | |
---|---|
Level Found | < 0.01 |
Units | % |
Reporting Limit | 0.01 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Sodium (total) | |
---|---|
Level Found | 0.24 |
Units | % |
Reporting Limit | 0.01 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Iron (total) | |
---|---|
Level Found | 1010 |
Units | ppm |
Reporting Limit | 50 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Calcium (total) | |
---|---|
Level Found | < 0.01 |
Units | % |
Reporting Limit | 0.01 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Manganese (total) | |
---|---|
Level Found | 1110 |
Units | ppm |
Reporting Limit | 20 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Zinc (total) | |
---|---|
Level Found | 594 |
Units | ppm |
Reporting Limit | 20 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Copper (total) | |
---|---|
Level Found | 540 |
Units | ppm |
Reporting Limit | 20 |
Method | MWL ME PROC 26 |
Analyst Date | jdg9-2020/02/07 |
Verified Date | tat9-2020/02/07 |
Molybdenum (total) | |
---|---|
Level Found | < 1.0 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/02/07 |
Verified Date | kkh9-2020/02/09 |
For questions please contact:
Rob Ferris
Account Manager
(402)-829-9871
[email protected]
*All results are reported on an AS RECEIVED basis., ppm = parts per million, ppm = mg/kg.
The result(s) issued on this report only reflect the analysis of the sample(s) submitted.
Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.
Encouraging pollinators to thrive in your area can aid pollination rates which can increase crop fertilization and yield.
Fraser Berry Farms is one of the 600 blueberry farms in BC growing 96% of Canada’s highbush blueberries.
As a 4th generation blueberry farmer with a lifetime of experience in farming and the fertilizer industry, Jason Smith knows how to get the most from his crop.
ReSET Soil™ is a fertigation nutrient solution to help with bud set and spring nutrition.
KMAX is a potassium supplement that contains the plant growth regulator Kinetin to help enhance the potential volume of fruit and berries.
ReSET Foliar™ provides important nutrients for bud set and early spring growth.
ReROOT™ is a mild fertilizer solution that encourages strong root growth and development.
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.