KMAX™

KMAX is a potassium supplement that contains the plant growth regulator Kinetin to help enhance the potential volume of fruit and berries.

Category: Orchard Tags: Berries, Fruit

Description

KMAX™ is a foliar macronutrient for berries and fruit trees that provides potassium in an easy to absorb form. Potassium is crucial during fruit development in order to increase sugar metabolism and translocation. KMAX™ contains the plant growth regulator Kinetin to help increase the potential volume and size of your fruit.

When to Use

Begin applications after petal fall. Applications can be repeated up to 4 times before harvest. Allow a minimum of 7 days between applications.

How it Works

KMAX™ provides potassium, kinetin, amino acids, simple sugars and organic acids. Potassium allows production of protein, while kinetin, enhances cell division and growth, and stimulate branching.

Label

0-0-29

PLUS 0.05% KINETIN

Contains potassium and the plant growth regulator Kinetin which help enhance fruit size and development.

Orchard product

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.
Berries and Fruit Trees: Apply as a foliar spray at 5 L per hectare (2 L/ acre) with a minimum of 500 L water per hectare (200 L/acre). Begin applications after petal fall. Applications can be repeated up to 4 times before harvest. Allow a minimum of 7 days between applications. KMAX™ has not been tested on all crops. Contact your technical representative for rates on crops not listed on the label. Spray early morning or late afternoon when the sun is lower in the sky.

COMPATIBILITY: This product is compatible with most pesticides and fertilizers. If compatibility is uncertain, conduct a jar test prior to use.
Add tank-mix partners in the following order:
Water, Agrochemical, KMAX™. Keep agitator running while mixing and spraying.

GUARANTEED MINIMUM ANALYSIS:

Soluble Potash (K₂O): 29%
Sulphur (S): 12.0%
Cytokinin as Kinetin: 0.05%
L-Glutamine: 0.051%
Seaweed extract (Ascophyllum nodosum): 0.1%

CAUTION: Do not apply when air temperatures are above 29°C (85°F) and avoid spraying on windy days. Stop product use at least 21 days before harvest. Do not re-enter or allow re-entry into treated areas until 4 hours after application. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate or allow rinse water to contaminate ponds or lakes. Do not connect an irrigation / chemigation system unless the backflow system (backflow preventer, check valve, vacuum relief valve) is in place to prevent water source contamination from backflow.

Registration number 2016149F Fertilizers Act

DANGER HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE / doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE / doctor. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.

made in canada

For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Compatibility

Compatible with most pesticides and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

√

Compatible

Not Compatible

Caution

–

Not Tested

	HERBICIDES	ACTIVE INGREDIENTS
√	2,4-D AMINE	2,4-D
√	2,4-D ESTER	2,4-D
√	ACHIEVE	Tralkoxydim
√	ALLY	Metsulfuron methyl
√	AGRAL 90 OR AGSURF II	Nonylphenoxy polyethoxy ethanol
√	ARMEZON	Topramezone
√	ASSIST	Paraffin Base Mineral Oil
√	ASSURE II	Quizalofop-P-ethyl
√	ATTAIN XC A	Fluroxypyr
√	ATTAIN XC B	2,4-D ester
√	AVENGE 200 C	Difenzoquat
√	AXIAL	Pinoxaden
√	BANVEL II	Dicamba
√	BARRICADE II	Tribenuronmethyl, thifensulfuronmethyl
√	BASAGRAN	Bentazon
√	BUCTRIL M	Bromoxynil
√	CENTURION	Clethodim
√	CLEVER	Quinclorac
√	CURTAIL M	Clopyralid, MCPA
√	DYVEL DS	Dicamba, 2,4-D, Mecoprop-P
√	ESTAPROP XT	2,4-D, dichlorprop-P
√	EQUINOX	Tepraloxydim
√	EVEREST GBX	Flucarbazone
√	FLAX MAX	Clopyralid, MCPA
√	FRONTLINE	Florasulam, MCPA
√	GLYPHOSATE	Glyphosate, N-(phosphonomethyl) glycine
√	HARMONY SG	Thifensulfuronmethy
√	HARMONY GRASS	Clodinafop-propargyl
!	HORIZON NG	Clodinafop-propargyl
!	INFINITY	Bromoxynil, pyrasulfotole
√	LIBERTY 150 SN	Glufosinate ammonium
√	LONTREL	Clopyralid
√	MANIPULATOR 620	Chlormequat chloride
√	MCPA AMINE 500	MCPA amine
!	MCPA ESTER 500	MCPA ester
√	MERGE	Surfactant blend
√	OCTTAIN XL	Octane
√	ODYSSEY	Imazamox, imazethapyr
√	ODYSSEY ULTRA	Sethoxydim
√	POAST ULTRA	Sethoxydim
√	PRESTIGE XCA	Fluroxypyr
√	PRESTIGE XCB	Clopyralid
√	PUMA ADVANCE	Fenoxaprop-p-ethyl/safener
√	PURSUIT	Imazethapyr
√	REFINE SG	Thifensulfuronmethyl, tribenuronmethyl
√	REFLEX	Fomesafen
√	SENCOR 75 DF	Metribuzin
√	SIMPLICITY	Pyroxsulam
√	SOLO ADV	Imazamox
√	SPECTRUM A (FLOROSULAM)	Florasulam
√	SPECTRUM B	Clopyralid, MCPA
√	STELLAR	Forasulam, fluroxypyr
√	TARGET	MCPA, mecoprop-P, dicamba
√	THUMPER	Bromoxynil, 2,4-D ester
√	TURBOCHARGE	Mineral oil, surfactant blend
!	VARRO	Thiencarbazone-methyl
√	VELOCITY 3M	Bromoxynil, pyrasulfotole, thiencarbazonemethyl
√	VIPER ADV	Imazamox, bentazon

	FUNGICIDES	ACTIVE INGREDIENTS
!	ACAPELA	Picoxystrobin
!	ALLEGRO 500 F	Fluazinam
√	AGSURF OR AGRAL 90	Nonylphenoxy polyethoxy ethanol
X	ASTOUND	Cyprodinil, Fludioxonil
!	BRAVO 500	Chlorothalonil
√	CARAMBA	Metconazole
!	DELARO 325 SC	Prothioconazole, trifloxystrobin
!	DITHANE	Mancozeb
√	FOLICUR 250 EC	Tebuconazole
–	FUSE	Tebuconazole
√	HEADLINE EC	Pyraclostrobin
–	KUMULUS DF	Sulphur
!	LANCE WDG	Boscalid
!	PRIAXOR	Fluxapyroxad, pyraclostrobin
√	PROLINE 480 SC	Prothioconazole
!	PROSARO 250 EC	Prothioconazole, tebuconazole
√	QUADRIS	Azoxystrobin
!	QUASH	Metconazole
!	QUILT	Azoxystrobin, propiconazole
!	ROVRAL FLO	Iprodione
–	SERENADE MAX	Bacillus subtilis
–	SERENADE CPB	Bacillus subtilis
√	TILT 250E	Propiconazole
√	TWINLINE	Pyraclostrobin, metconazole
√	VERTISAN	Penthiopyrad

	FERTILIZERS	ACTIVE INGREDIENTS
√	ALPINE G22	Phosphoric acid salt
√	ATS	Ammonium thiosulfate
√	KTS	Potassium thiosulfate
√	UAN	Urea ammonium nitrate
√	10-34-0	Ammonium poly phosphate

	AAS FERTILIZERS
√	Active Boron
√	Active BUILD
√	Active Copper
√	Active FLOWER
√	Active GrainFILL
X	Active INFURROW
√	Active Iron
√	Active KONNECT
X	Active Manganese
√	Active PodFILL
X	Active PRIME
√	Active VPR PLUS
X	Active Zinc
√	Proform N

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFIER	KMAX 0-0-29 + 0.05% Kinetin
PRODUCT USE	Potassium Fertilizer plus plant growth regulator.
MANFACTURERS NAME	Active AgriScience Inc.
STREET ADDRESS	3422 Millar Avenue
CITY	Saskatoon
POSTAL CODE	S7K 5Y7
DATE	July 9, 2021
PROVINCE	Saskatchewan, Canada
EMERGENCY TELEPHONE	+1 877-715-9305
PREPARED BY	Active AgriScience Inc.
USE RESTRICTIONS	For professional use only. Use only as labeled.
DISTRIBUTORS NAME
STREET ADDRESS
CITY
POSTAL CODE
COUNTRY
EMERGENCY TELEPHONE

SECTION 2 – HAZARDS IDENTIFICATION
GHS CLASSIFICATION
HPR (WHMIS 2015)	Skin Corrosion / Irritation: Category 1A Specific Target Organ Toxicity (single exposure) Category 3; Target organs: respiratory system
OSHA Hazard Communication Standard (29 CFR 1910.1200)	Skin Corrosion / Irritation: Category 1A Specific Target Organ Toxicity (single exposure) Category 3; Target organs: respiratory system
DANGER	HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. Use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: *IF SWALLOWED:* Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. *IF ON SKIN:* Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. *IF INHALED:* Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor. *IF IN EYES:* Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
INGREDIENTS	CAS#	CONCENTRATION
Potassium Hydroxide	1310-58-3	10-15%

SECTION 4 – FIRST AID MEASURES
EYE CONTACT	Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
SKIN CONTACT	Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention.
INHALATION	Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE/doctor.
INGESTION	Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.
Most Important Symptoms, both acute & delayed	Causes severe burns and eye damage. May cause respiratory irritation.

SECTION 5 – FIRE FIGHTING MEASURES
FLAMMABLE	Product will not burn or support combustion.
MEANS OF EXTINCTION	Use extinguishing methods appropriate for the surrounding fire.
FLASHPOINT & METHOD	NAP
UPPER FLAMMABLE LIMIT	NAP
LOWER FLAMMABILITY LIMIT	NAP
AUTO IGNITION TEMPERATURE	NAP
SENSITIVITY TO IMPACT	NAP
SENSITIVITY TO STATIC DISCHARGE	NAP
HAZARDOUS COMBUSTION PRODUCTS	Toxic, irritating and/or corrosive gases may be released during a fire.

SECTION 6 – ACCIDENTAL RELEASE MEASURES
LEAK & SPILL PROCEDURES	Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE
HANDLING	Wear personal protective equipment outlined in SECTION 8. Do not breathe mist/spray. Do not apply when air temperatures are above 29°C (85°F) and avoid spraying on windy days. Do not apply within 21 days to harvest. Do not re-enter or allow re-entry into treated areas until 4 hours after application. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate or allow rinse water to contaminate ponds or lakes. Do not connect an irrigation / chemigation system unless the backflow system (backflow preventer, check valve, vacuum relief valve) is in place to prevent water source contamination from backflow. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.
STORAGE	KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE LIMITS	Not available.
ENGINEERING CONTROLS	Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.
PERSONAL PROTECTIVE EQUIPMENT
Skin	Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently.
Eyes	Wear chemical resistant goggles when handling or applying this product.
Respirator	Use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE	Liquid
COLOUR	Amber
BOILING POINT	NAV
EVAPORATION RATE	NAV
ODOUR	NAV
SOLUBILITY IN WATER	Very soluble
APPEARANCE	Dark coloured liquid
VISCOSITY	NAV
FREEZING POINT	NAV
SPECIFIC GRAVITY	1.46 – 1.52 g/cm³
pH	14.0 – 15.5
ODOUR THRESHHOLD	NAV

SECTION 10 – STABILITY AND REACTIVITY
CHEMICAL STABILITY	Stable under normal conditions of use and storage.
INCOMPATIBLE WITH OTHER SUBSTANCES	Not available.
HAZARDOUS DECOMPOSING PRODUCTS	Toxic irritating and/or corrosive gases may be released during a fire.

SECTION 11 – TOXICOLOGICAL INFORMATION
ACUTE TOXICITY	Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria.
CHRONIC TOXICITY	Based on the available information, product does not meet criteria for chronic toxicity.
EYE / SKIN IRRITATION	Causes severe burns and eye damage.
SENSITIZATION	Not available.
CARCINOGENICITY	No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.
REPRODUCTIVE TOXICITY	Not available.
MUTAGENICITY	Not available.

SECTION 12 – ECOLOGICAL INFORMATION
ECOTOXICITY	Harmful to aquatic organisms. Avoid release into the environment.

SECTION 13 – DISPOSAL CONSIDERATIONS
WASTE DISPOSAL	Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Independent, 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 21‑054‑4046
REPORT DATE: Feb 23, 2021
RECEIVED DATE: Feb 15, 2021
SEND TO: 52790

13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com

REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
KMAX

Sample ID: KMAX Batch 204531

Lab Number: 8866076

Arsenic (total)
Level Found	< 5.0
Units	mg/kg
Reporting Limit	5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Cadmium (total)
Level Found	< 0.50
Units	mg/kg
Reporting Limit	0.5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Chromium (total)
Level Found	< 1.00
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Cobalt (total)
Level Found	< 1.00
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Copper (total)
Level Found	< 1.0
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Mercury (total)
Level Found	< 0.05
Units	mg/kg
Reporting Limit	0.05
Method	EPA 7471
Analyst Date	pjd8-2021/02/19
Verified Date	trh1-2021/02/19

Molybdenum (total)
Level Found	1.6
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/17
Verified Date	trh1-2021/02/19

Nickel (total)
Level Found	< 1.0
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Lead (total)
Level Found	< 5.0
Units	mg/kg
Reporting Limit	5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Selenium (total)
Level Found	< 10.0
Units	mg/kg
Reporting Limit	10
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Zinc (total)
Level Found	< 2.0
Units	mg/kg
Reporting Limit	2
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Potash (K2O)
Level Found	29.5
Units	%
Reporting Limit	0.05
Method	MWL ME PROC 26
Analyst Date	Auto-2021/02/17
Verified Date	asl4-2021/02/17

Sulfur (total)
Level Found	13.3
Units	%
Reporting Limit	0.05
Method	MWL ME PROC 26
Analyst Date	jdg9-2021/02/22
Verified Date	asl4-2021/02/23

Sample ID: Active KONNECT Batch 203421

Lab Number: 8866077

Arsenic (total)
Level Found	< 5.0
Units	mg/kg
Reporting Limit	5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Cadmium (total)
Level Found	< 0.50
Units	mg/kg
Reporting Limit	0.5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Chromium (total)
Level Found	< 1.00
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Cobalt (total)
Level Found	< 1.00
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Copper (total)
Level Found	< 1.0
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Mercury (total)
Level Found	< 0.05
Units	mg/kg
Reporting Limit	0.05
Method	EPA 7471
Analyst Date	pjd8-2021/02/19
Verified Date	trh1-2021/02/19

Molybdenum (total)
Level Found	< 1.0
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Nickel (total)
Level Found	< 1.0
Units	mg/kg
Reporting Limit	1
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Lead (total)
Level Found	< 5.0
Units	mg/kg
Reporting Limit	5
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Selenium (total)
Level Found	< 10.0
Units	mg/kg
Reporting Limit	10
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Zinc (total)
Level Found	< 2.0
Units	mg/kg
Reporting Limit	2
Method	EPA 6010
Analyst Date	ery3-2021/02/16
Verified Date	trh1-2021/02/19

Potash (K2O)
Level Found	28.5
Units	%
Reporting Limit	0.05
Method	MWL ME PROC 26
Analyst Date	Auto-2021/02/23
Verified Date	asl4-2021/02/23

Sulfur (total)
Level Found	12.4
Units	%
Reporting Limit	0.05
Method	MWL ME PROC 26
Analyst Date	gmb3-2021/02/18
Verified Date	asl4-2021/02/23

For questions please contact:
Rob Ferris Signature
Rob Ferris
Account Manager
(402)-829-9871
[email protected]

Sample(s) was prepared for EPA 6010 analysis by EPA 3050b.

*All results are reported on an AS RECEIVED basis., ppm = parts per million, ppm = mg/kg.

The result(s) issued on this report only reflect the analysis of the sample(s) submitted.

Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.

Downloads

Label SDS

Feeding Calculator

Calculate

KMAX™

Description

When to Use

How it Works

Label

Compatibility

Safety Data Sheet

Independent, 3rd Party Lab Analysis

Downloads

Feeding Calculator

Feature a Farm: Fraser Berry Farms

PollinAID™

ReROOT™

ReSET Soil™

ReSET Foliar™

Storage and Handling

Find a Sales Rep

Download the App

KMAX™

Description

When to Use

How it Works

Label

Compatibility

Safety Data Sheet

Independent, 3rd Party Lab Analysis

Downloads

Feeding Calculator

Related Articles

Feature a Farm: Fraser Berry Farms

Related Products

…

PollinAID™

ReROOT™

ReSET Soil™

ReSET Foliar™

Resources

Storage and Handling

Find a Sales Rep

Download the App

Download the App