Active PLS™

Active PLS™ improves germination, early growth, and the efficiency of biological nitrogen fixation (BNF) for legumes.

Category: Tag:

Description

Active PLS™ is a seed nutritional coating that supplies seeds with the micronutrients and trace elements needed to improve germination, early growth and the efficiency of Biological Nitrogen Fixation (BNF). Active PLS™ works synergistically with rhizobial inoculants to maximize BNF, leading to stronger plants and higher yields.

When to Use

Prior to seeding soybeans, faba beans, peas, lentils, chickpeas and other beans.

How it Works

Active PLS has a pH ideally balanced to promote rhizobacterial growth on legumes and fosters better communication between the root and the inoculant.

Active PLS maintains the ability to simultaneously up-regulate desirable pathways and down-regulate undesirable pathways, allowing plants to maximize their genetic potential under cold, wet or drought conditions.

Active PLS has a flexible formula which can be mixed either simultaneously or sequentially with rhizobial inoculants and compatible agrochemicals.

Label

2-10-10

SEED TREATMENT FOR LEGUME CROPS

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

DIRECTIONS FOR USE: SHAKE WELL BEFORE USING. Apply as a seed nutrient dressing to soybeans, faba beans, peas, lentils, chickpeas and other beans using 2 ml / kg of seed. Seed coating can be done simultaneously with Active PLS™ and compatible agrochemicals. If using Active PLS™ without additional agrochemicals, dilute with water (1:1 ratio) to ensure uniform coverage of seeds.

  • Calibrate equipment to release the required amount of Active PLS™ and other agrochemicals based on seed flow rate.
  • Thoroughly mix seeds with the Active PLS™ (and other agrochemicals). A colouring additive allows a visual check to ensure all seeds are uniformly coated.
  • Allow treated seeds to air dry for 5-10 min before seeding.
  • Application rates exceeding recommended rates can negatively affect seed germination. Always follow label directions.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program. This product may be tank mixed with pesticides. In some cases, tank mixing with pest control products can result in reduced pesticide efficacy or increased host crop injury. The user should contact the company responsible for the pest control product before applying any tank mix.

COMPATIBILITY:  Compatible with Rhizobium and Bradyrhizobium inoculants. This product is compatible with most other pesticides and fertilizers. If compatibility is uncertain, conduct a jar test prior to use.

Add tank mix partners in the following order: Seed, Agrochemical, Active PLS™, Inoculants.

GUARANTEED MINIMUM ANALYSIS:

  • Total Nitrogen (N): 2%
  • Available Phosphate (P2O5):10%
  • Soluble Potash (K2O):10%
  • Boron (B)(actual): 0.1%
  • Cobalt (Co)(actual): 0.04%
  • Iron (Fe)(actual): 0.005%
  • Manganese (Mn)(actual): 0.1%
  • Molybdenum (Mo)(actual): 0.05%
  • Nickel (Ni)(actual): 0.001%
  • Zinc (Zn)(actual): 0.2%
  • Fulvic acid: 1%
  • Lactic acid: 1%
  • EDDHA (Ethylenediamine-N,N’-bis(2-hydroxyphenylacetic acid): 0.0125%
  • EDTA (Ethylenediaminetetraacetic acid): 0.36%

Registration Number 2024038M Fertilizers Act

CAUTION: THIS FERTILIZER CONTAINS BORON, COBALT, IRON, MANGANESE, MOLYBDENUM, NICKEL, AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied

FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.

made in canada

For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada


Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Compatibility

Compatible with Rhizobium and Bradyrhizobium inoculants and with certain seed treatments (see table below). As inoculants are living organisms and can be harmed by some agricultural chemicals, check with your dealer/manufacturer before using any other chemical seed treatments with Active PLS™ inoculant combinations.

ACTIVE PLS COMPATIBILITY WITH SEED TREATMENTS
COMPATIBLE
Apron Maxx RTA
Cruiser Maxx Vibrance Beans
Cruiser Vibrance Quatro
Gaucho
Insure Pulse
Intego Pulse
Rancona Trio
Trilex
Vibrance Max
Vibrance 500FS
Zeltara Pulse

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active PLS 2-10-10

PRODUCT USE

Agricultural fertilizer

MANUFACTURERS NAME

Active AgriScience Inc.

ADDRESS

3422 Millar Avenue
Saskatoon
S7K 5Y7
Saskatchewan, Canada

EMERGENCY TELEPHONE

+1 877-715-9305

DATE

August 23, 2021

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

Based on the available information, this material is not considered hazardous by HPR (WHMIS 2015) or the OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Nickel Chloride

7718-54-9

<0.01

Cobalt Chloride

7646-79-9

<0.2

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

Most Important Symptoms, both acute & delayed

No known adverse effects. Treat symptomatically.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic, and / or irritating gases may be released during a fire.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

The use of protective gloves is recommended when handling or applying this product.

Eyes

The use of eye protection is recommended when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Light purple

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Soluble

APPEARANCE

Light purple liquid

VISCOSITY

NAV

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.2 – 1.3 g/cm3

pH

6.5 – 7.5

ODOUR THRESHHOLD

NAV

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic and/or irritating gases may be released during a fire.

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: Does not meet criteria.

Acute Dermal: Does not meet criteria.

CHRONIC TOXICITY

Based on the available information, product does not meet criteria for chronic toxicity.

EYE / SKIN IRRITATION

Not available

SENSITIZATION

Contact with skin may cause sensitization.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Not available.

MUTAGENICITY

Not available.

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Product may be harmful to aquatic life.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

Downloads

Feeding Calculator

Calculate

Find a Sales Rep

Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!

Active AgriScience App

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!