Active PRIME™

The nutrient content in Active PRIME™ helps improve germination with significantly greater root growth for hardier seedlings.

Description

Active PRIME™ contains nutrients needed for your newly seeded crop to get off to a strong start. Active PRIME is a seed coating that helps improve germination, boosts root growth, and protects seeds and seedlings from unfavourable environmental conditions.

When to Use

Prior to seeding wheat, canola, corn, barley, oat, flax, sunflower, and vegetable seeds.

For the best results, use the complete line of recommended Active AgriScience products for your crop.

  • Wheat: Active PRIME, Active BUILD, Active COMPLETE, Proform N, Active KONNECT, Micronutrients as needed.
  • Corn, Hops: Active PRIME, Active BUILD, Active FLOWER, Active COMPLETE, Proform N, Micronutrients as needed.
  • Canola, Tomatoes, Vegetables: Active PRIME, Active BUILD, Active FLOWER, Proform N, Active KONNECT, Micronutrients as needed.
  • Tree Fruit, Tree Nuts: Active BUILD, Active FLOWER, Active COMPLETE, Proform N, Active KONNECT, Micronutrients as needed.
  • Berries: Active BUILD, Active FLOWER, Proform N, Active KONNECT, Micronutrients as needed.

How it Works

Active PRIME is a dressing applied to seeds before planting. It contains nutrients, organic acids, and Active AgriScience’s proprietary activation formula. Active PRIME helps protect the seeds and allows the nutrients to be utilized, even in unfavourable conditions, producing an increased number of roots and deeper roots.

While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.

*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).

Label

3.75-15-4.5

PREMIUM SEED NUTRIENT DRESSING

Registration number 2023726M Fertilizers Act.

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. SHAKE WELL BEFORE USING.

Apply once before seeding as a seed nutrient dressing to wheat, canola, corn, barley, oat, flax, sunflower, and vegetable seeds at the rate of 4 ml / kg of seed. Seed coating can be done simultaneously with Active PRIME™ and compatible agrochemicals. If using Active PRIME™ without additional agrochemicals, dilute with water (1:1 ratio) to ensure uniform coverage of seeds.
• Calibrate equipment to release the required amount of Active Prime™ and other agrochemicals based on seed flow rate.
• Thoroughly mix seeds with the Active Prime™ (and other agrochemicals) mixture. A colouring additive allows a visual check to ensure all seeds are uniformly coated.
• Allow treated seeds to air dry for 5-10 min before seeding.
Application rates exceeding recommended rates can negatively effect seed germination. Always follow label directions.

COMPATIBILITY: This product is compatible with most fertilizers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use. Keep agitator running while mixing and spraying.

GUARANTEED MINIMUM ANALYSIS:

  • Total Nitrogen (N): 3.75%
  • Available Phosphate (P2O5): 15%
  • Soluble Potash (K2O): 4.5%
  • Boron (B)(actual): 0.05%
  • Iron (Fe)(actual): 0.01%
  • Manganese (Mn)(actual): 0.8%
  • Zinc (Zn)(actual): 0.9%
  • Citric acid: 0.5%
  • EDTA (Ethylenediaminetetraacetic acid) (chelating agent): 0.04%

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.


Corrosive

DANGER HAZARD STATEMENTS:CAUSES SEVERE BURNS AND EYE DAMAGE.

CAUTION: THIS FERTILIZER CONTAINS BORON, IRON, MANGANESE AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.

made in canada

For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada


Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Independent 3rd Party Yield Data

WHEAT • 6 YEAR AVERAGE YIELD DATA*
bu/acre
70
65
60
55
50
45
40
35
30
57
59.7
+
2.7
bu/acre
Control
Active PRIME
TREATMENT Check (bu/acre) Active PRIME™ (bu/acre)
YIELD – 2013 77.0 81.0
YIELD – 2014 63.3 66.1
YIELD – 2015 50.9 54.2
YIELD – 2016 45.3 47.3
YIELD – 2017 68.2 70.9
YIELD – 2018 37.5 38.8
AVERAGE 57.0 59.7
% CHANGE 4.7%
*3rd party yield research with Ag-Quest, BC Grain, ICMS, Mara, and New-Marc Research.
CANOLA • 6 YEAR AVERAGE YIELD DATA*
bu/acre
70
65
60
55
50
45
40
35
30
44.9
47.9
+
3.0
bu/acre
Control
Active
PRIME
TREATMENT Check (bu/acre) Active PRIME™ (bu/acre)
YIELD – 2013 45.0 49.0
YIELD – 2014 52.0 59.6
YIELD – 2015 42.3 44.7
YIELD – 2016 33.8 35.7
YIELD – 2017 57.7 58.4
YIELD – 2018 38.9 39.9
AVERAGE 44.9 47.9
% CHANGE 6.5%
*3rd party yield research with Ag-Quest, BC Grain, ICMS, Mara, and New-Marc Research.
OATS • 3 YEAR AVERAGE YIELD DATA*
bu/acre
126
125
124
123
122
121
120
119
122.8
124.1
+
1.3
bu/acre
Control
Active PRIME
TREATMENT Check (bu/acre) Active PRIME™ (bu/acre)
YIELD – 2016 138.1 143.5
YIELD – 2017 159.6 157.7
YIELD – 2018 70.6 71.2
AVERAGE 122.8 124.1
% CHANGE 1.1%
*3rd party yield research with Ag-Quest, BC Grain, ICMS, Mara, and New-Marc Research.
PEAS • 2 YEAR AVERAGE YIELD DATA*
bu/acre
70
65
60
55
50
45
40
35
30
52.9
58.4
+
5.5
bu/acre
Control
Active PRIME
TREATMENT Check (bu/acre) Active PRIME™ (bu/acre)
YIELD – 2016 51.3 54.5
YIELD – 2017 54.5 62.2
AVERAGE 52.9 58.4
% CHANGE 10.3%
*3rd party yield research with Ag-Quest, BC Grain, ICMS, Mara, and New-Marc Research.
WHEAT • GERMINATION INCREASE & DISEASE REDUCTION DATA*
%
100
95
90
85
80
75
70
65
92
93.8
+
1.8
%
Control
Active PRIME
TREATMENT Check (%) Active PRIME™ (%)
GERMINATION AVERAGE 92.0 93.8
GERMINATION DIFFERENCE 1.8
Fusarium spp REDUCTION 14.4 15.4
Fusarium spp DIFFERENCE 1.0
*3rd party yield research with Discovery Seed Labs.
BARLEY • GERMINATION INCREASE & DISEASE REDUCTION DATA*
%
100
95
90
85
80
75
70
65
85
85.8
+
0.8
%
Control
Active PRIME
TREATMENT Check (%) Active PRIME™ (%)
GERMINATION AVERAGE 85.0 85.8
GERMINATION DIFFERENCE 0.8
C. Sativus REDUCTION 41.9 50.4
C. Sativus DIFFERENCE 8.5
*3rd party yield research with Discovery Seed Labs.
AVERAGE VIGOUR INCREASE DATA*
% Vigour
100
90
80
70
60
50
40
30
20
10
0
69
74
+
5.0
%
Control
Active PRIME
71
78
+
7.0
%
Control
Active PRIME
76
85
+
9.0
%
Control
Active PRIME
88
91
+
3.0
%
Control
Active PRIME
TREATMENT Check (%) Active PRIME™ (%)
WHEAT DURUM VIGOUR 69.0 74.0
WHEAT COMMON VIGOUR 71.0 78.0
PEA VIGOUR 76.0 85.0
LENTIL VIGOUR 88.0 91.0
*3rd party yield research with 20/20 Seed Labs.

Compatibility

Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

ACTIVE PRIME COMPATIBILITY WITH SEED TREATMENTS
COMPATIBLE
Apron Maxx RTA
Cruiser 5FS
Cruiser Maxx Vibrance Beans
Cruiser Maxx Vibrance Cereals
Cruiser Maxx Pulses
Cruiser Maxx Vibrance Pulses
Dividend XL RTA
Insure Cereal
Insure Pulse
Rancona Pinnacle
Rancona Trio
Raxil Pro
Raxil Pro Shield
Trilex Evergol
Trilex Evergol Shield
Vibrance 500FS
Vibrance Maxx
Vibrance Maxx RFC
Vibrance Quattro
Vitaflo 280
ACTIVE PRIME WITH ACTIVE AGRISCIENCE PRODUCTS
COMPATIBLE
Active BUILD
Active COMPLETE
Proform N
Active COPPER
Active MANGANESE
Active ZINC
INCOMPATIBLE
Active FLOWER
Active KONNECT
Active BORON

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active PRIME 3.75-15-4.5

PRODUCT USE

Agricultural fertilizer

MANUFACTURERS NAME

Active AgriScience Inc.

ADDRESS

3422 Millar Avenue
Saskatoon
S7K 5Y7
Saskatchewan, Canada

EMERGENCY TELEPHONE

+1 877-715-9305

DATE

July 9, 2021

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

HPR (WHMIS 2015)

Eye Damage / Irritation: Category 1

Skin Corrosion / Irritation: Category 1

OSHA Hazard Communication Standard (29 CFR 1910.1200)

Eye Damage / Irritation: Category 1

Skin Corrosion / Irritation: Category 1

WHMIS Corrosive

DANGER

HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

 

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Phosphoric acid

7664-38-2

15 – 20%

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.

Most Important Symptoms, both acute & delayed

CAUSES SEVERE BURNS AND EYE DAMAGE.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic, irritating and / or corrosive gases may be released during a fire.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently.

Eyes

Wear chemical resistant goggles when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Maroon

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Fully soluble

APPEARANCE

Maroon coloured liquid

VISCOSITY

NAV

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.21 – 1.28 g/cm3

pH

2 – 2.5

ODOUR THRESHHOLD

NAV

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic and/or irritating gases may be released during a fire.

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: Does not meet criteria.

Acute Dermal: Does not meet criteria.

CHRONIC TOXICITY

Based on the available information, product does not meet criteria for chronic toxicity.

EYE / SKIN IRRITATION

Causes severe burns and eye damage.

SENSITIZATION

Not available.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Not available.

MUTAGENICITY

Not available.

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Not available.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Independent 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 20‑042‑4166
REPORT DATE: Feb 11, 2021
RECEIVED DATE: Feb 5, 2021
SEND TO: 52790
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
4-18-6

Sample ID: Active PRIME

Lab Number: 8721853

Date Sampled: 2020‑01‑29

Nitrogen (total)
Level Found 3.87
Units %
Reporting Limit 0.01
Method MWL WC PROC 55
Analyst Date hns0-2020/02/06
Verified Date tat9-2020/02/07
Phosphate (P2O5)
Level Found 15.1
Units %
Reporting Limit 0.1
Method MWL ME PROC 26
Analyst Date eas2-2020/02/11
Verified Date tat9-2020/02/11
Potash (K2O)
Level Found 4.55
Units %
Reporting Limit 0.05
Method MWL ME PROC 26
Analyst Date Auto-2020/02/11
Verified Date tat9-2020/02/11
Boron (total)
Level Found 538
Units ppm
Reporting Limit 100
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Sulfur (total)
Level Found < 0.05
Units %
Reporting Limit 0.05
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Magnesium (total)
Level Found < 0.01
Units %
Reporting Limit 0.01
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Sodium (total)
Level Found 0.05
Units %
Reporting Limit 0.01
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Iron (total)
Level Found 138
Units ppm
Reporting Limit 50
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Calcium (total)
Level Found 0.02
Units %
Reporting Limit 0.01
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Manganese (total)
Level Found 8060
Units ppm
Reporting Limit 20
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Zinc (total)
Level Found 9860
Units ppm
Reporting Limit 20
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Copper (total)
Level Found < 20.0
Units ppm
Reporting Limit 20
Method MWL ME PROC 26
Analyst Date jdg9-2020/02/07
Verified Date tat9-2020/02/07
Molybdenum (total)
Level Found < 1.0
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/02/07
Verified Date kkh9-2020/02/09

Downloads

Feeding Calculator

Calculate

Find a Sales Rep

Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!

Active AgriScience App

Download the App

A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.

Download it for free on Android or iOS!