Active INFURROW™
Active INFURROW™ delivers nutrients directly to the root zone to stimulate early germination, better root growth and stronger plants.
Description
The first few days of a plant’s life determine a lot about how that plant will grow and what it will produce. Active INFURROW™ is a starter seed nutrient package for wheat, canola, corn, soybean, pea, lentils and other seeds. It contains essential nutrients and trace elements specifically designed for seed germination and early growth. Active INFURROW™ delivers nutrients directly to the root zone to stimulate early germination, better root development and stronger plants.
Most crops are seeded when the soil is too cold for soil bacteria to make nutrients readily available to the plant. Active INFURROW™ supplies much needed nutrients right at the root zone so growing plants can thrive even in cold soil conditions.
When to Use
After seeding wheat, canola, corn, soybean, pea, lentils and other seeds. Apply in a band 5 cm (2”) from the seeds.
While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption. Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests. *Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).
Label
2024
Delivers nutrients directly to the root zone for germination and root growth.
DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. SHAKE WELL BEFORE USING. Active INFURROW™ is a starter seed nutrient package that delivers essential nutrients and trace elements at planting for wheat, canola, corn, soybean, pea, lentils and other seeds. Apply once in a band 5 cm (2”) from the seeds. MIXING INSTRUCTIONS:
- Mixing with existing starter fertilizers such as 10-34-0: Dissolve Active INFURROW™ at the rate of 0.2 – 0.5 L per acre.
- Mixing with foliar applied herbicide-fertilizer tank mixes: Dissolve Active INFURROW™ at the rate of 0.2 – 0.5 L per acre.
- Water volume: Use 40 L per acre in both of the above tank mixes.
COMPATIBILITY: Can be mixed with other agrochemicals. If combination has not previously been used, perform a jar test before use. Keep agitator running while mixing and spraying.
GUARANTEED MINIMUM ANALYSIS:
- Total Nitrogen (N): 3.75%
- Available Phosphate (P2O5): 15%
- Soluble Potash (K2O): 4.5%
- Boron (B)(actual): 0.05%
- Iron (Fe)(actual): 0.01%
- Manganese (Mn)(actual): 0.8%
- Zinc (Zn)(actual): 0.9%
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
Fertilizers in the mixture are exempt from registration.
DANGER HAZARD STATEMENTS:CAUSES SEVERE BURNS AND EYE DAMAGE.
CAUTION: This fertilizer contains boron, iron, manganese and zinc and should be used only as recommended. It may prove harmful when misused. Follow label instructions carefully: over-application may negatively affect seed germination.
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.
DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
FOR CHEMICAL EMERGENCY CALL: 1-639-398-0485.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
Compatibility
Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.
| ACTIVE INFURROW COMPATIBILITY WITH SEED TREATMENTS |
|---|
| COMPATIBLE |
|---|
| Apron Maxx RTA |
| Cruiser 5FS |
| Cruiser Maxx Vibrance Beans |
| Cruiser Maxx Vibrance Cereals |
| Cruiser Maxx Pulses |
| Cruiser Maxx Vibrance Pulses |
| Dividend XL RTA |
| Insure Cereal |
| Insure Pulse |
| Rancona Pinnacle |
| Raxil Pro |
| Raxil Pro Shield |
| Trilex Evergol |
| Trilex Evergol Shield |
| Vibrance 500FS |
| Vibrance Maxx |
| Vibrance Quattro |
| Vitaflo 280 |
| ACTIVE INFURROW WITH ACTIVE AGRISCIENCE PRODUCTS |
|---|
| COMPATIBLE |
|---|
| Active BUILD |
| Active COMPLETE |
| Proform N |
| Active COPPER |
| Active MANGANESE |
| Active ZINC |
| INCOMPATIBLE |
|---|
| Active FLOWER |
| Active KONNECT |
| Active BORON |
Safety Data Sheet
|
SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|
|
PRODUCT IDENTIFIER |
Active INFURROW 3.75-15-4.5 |
|
PRODUCT USE |
Agricultural fertilizer |
|
MANFACTURERS NAME |
Active AgriScience Inc. |
|
STREET ADDRESS |
3422 Millar Avenue |
|
CITY |
Saskatoon |
|
POSTAL CODE |
S7K 5Y7 |
|
July 9, 2021 |
|
|
PROVINCE |
Saskatchewan, Canada |
|
EMERGENCY TELEPHONE |
1-639-398-0485 |
|
PREPARED BY |
Active AgriScience Inc. |
|
USE RESTRICTIONS |
For professional use only. Use only as labeled. |
|
DISTRIBUTORS NAME |
|
|
STREET ADDRESS |
|
|
CITY |
|
|
POSTAL CODE |
|
|
COUNTRY |
|
|
EMERGENCY TELEPHONE |
|
|
SECTION 2 – HAZARDS IDENTIFICATION |
|
|
GHS CLASSIFICATION |
|
|
HPR (WHMIS 2015) |
Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 1 |
|
OSHA Hazard Communication Standard (29 CFR 1910.1200) |
Eye Damage / Irritation: Category 1 Skin Corrosion / Irritation: Category 1 |
|
DANGER |
HAZARD STATEMENTS: CAUSES SEVERE BURNS AND EYE DAMAGE. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, coveralls, goggles and face protection. Change gloves frequently. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
|
|
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS |
||
|
INGREDIENTS |
CAS# |
CONCENTRATION |
|
Phosphoric acid |
7664-38-2 |
15 – 20% |
|
SECTION 4 – FIRST AID MEASURES |
|
|
EYE CONTACT |
Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek immediate medical attention. |
|
SKIN CONTACT |
Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek immediate medical attention. |
|
INHALATION |
Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. |
|
INGESTION |
Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor. |
|
Most Important Symptoms, both acute & delayed |
CAUSES SEVERE BURNS AND EYE DAMAGE. |
|
SECTION 5 – FIRE FIGHTING MEASURES |
|
|
FLAMMABLE |
Product will not burn or support combustion. |
|
MEANS OF EXTINCTION |
Use extinguishing methods appropriate for the surrounding fire. |
|
FLASHPOINT & METHOD |
NAP |
|
UPPER FLAMMABLE LIMIT |
NAP |
|
LOWER FLAMMABILITY LIMIT |
NAP |
|
AUTO IGNITION TEMPERATURE |
NAP |
|
SENSITIVITY TO IMPACT |
NAP |
|
SENSITIVITY TO STATIC DISCHARGE |
NAP |
|
HAZARDOUS COMBUSTION PRODUCTS |
Toxic, irritating and / or corrosive gases may be released during a fire. |
|
SECTION 6 – ACCIDENTAL RELEASE MEASURES |
|
|
LEAK & SPILL PROCEDURES |
Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
|
SECTION 7 – HANDLING AND STORAGE |
|
|
HANDLING |
Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
|
STORAGE |
KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. |
|
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION |
|
|
EXPOSURE LIMITS |
Not available. |
|
ENGINEERING CONTROLS |
Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
|
PERSONAL PROTECTIVE EQUIPMENT |
|
|
Skin |
Wear chemical resistant gloves, coveralls and face protection when handling or applying this product. Change gloves frequently. |
|
Eyes |
Wear chemical resistant goggles when handling or applying this product. |
|
Respirator |
If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product. |
|
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES |
|
|
PHYSICAL STATE |
Liquid |
|
COLOUR |
Light pink |
|
BOILING POINT |
NAV |
|
EVAPORATION RATE |
NAV |
|
ODOUR |
NAV |
|
SOLUBILITY IN WATER |
Fully soluble |
|
APPEARANCE |
Light pink liquid |
|
VISCOSITY |
NAV |
|
FREEZING POINT |
NAV |
|
SPECIFIC GRAVITY |
1.22 – 1.27 g/cm3 |
|
pH |
2 – 2.5 |
|
ODOUR THRESHHOLD |
NAV |
|
SECTION 10 – STABILITY AND REACTIVITY |
|
|
CHEMICAL STABILITY |
Stable under normal conditions of use and storage. |
|
INCOMPATIBLE WITH OTHER SUBSTANCES |
Not available. |
|
HAZARDOUS DECOMPOSING PRODUCTS |
Toxic and/or irritating gases may be released during a fire. |
|
SECTION 11 – TOXICOLOGICAL INFORMATION |
|
|
ACUTE TOXICITY |
Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria. |
|
CHRONIC TOXICITY |
Based on the available information, product does not meet criteria for chronic toxicity. |
|
EYE / SKIN IRRITATION |
Causes severe burns and eye damage. |
|
SENSITIZATION |
Not available. |
|
CARCINOGENICITY |
No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
|
REPRODUCTIVE TOXICITY |
Not available. |
|
MUTAGENICITY |
Not available. |
|
SECTION 12 – ECOLOGICAL INFORMATION |
|
|
ECOTOXICITY |
Not available. |
|
SECTION 13 – DISPOSAL CONSIDERATIONS |
|
|
WASTE DISPOSAL |
Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
|
SECTION 14 – TRANSPORT INFORMATION |
|
|
SHIPPING |
TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. |
|
SECTION 15 – REGULATORY INFORMATION |
|
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
|
SECTION 16 – OTHER INFORMATION |
|
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
Independent 3rd Party Analysis
The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.
REPORT NUMBER: 20‑042‑4166
REPORT DATE: Feb 11, 2021
RECEIVED DATE: Feb 5, 2021
SEND TO: 52790
REPORT DATE: Feb 11, 2021
RECEIVED DATE: Feb 5, 2021
SEND TO: 52790
13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
4-18-6
For: (52790) Active Agriscience Inc
4-18-6
Sample ID: Active INFURROW
Lab Number: 8721853
Date Sampled: 2020‑01‑29
| Nitrogen (total) | |
|---|---|
| Level Found | 3.87 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL WC PROC 55 |
| Analyst Date | hns0-2020/02/06 |
| Verified Date | tat9-2020/02/07 |
| Phosphate (P2O5) | |
|---|---|
| Level Found | 15.1 |
| Units | % |
| Reporting Limit | 0.1 |
| Method | MWL ME PROC 26 |
| Analyst Date | eas2-2020/02/11 |
| Verified Date | tat9-2020/02/11 |
| Potash (K2O) | |
|---|---|
| Level Found | 4.55 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | Auto-2020/02/11 |
| Verified Date | tat9-2020/02/11 |
| Boron (total) | |
|---|---|
| Level Found | 538 |
| Units | ppm |
| Reporting Limit | 100 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Sulfur (total) | |
|---|---|
| Level Found | < 0.05 |
| Units | % |
| Reporting Limit | 0.05 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Magnesium (total) | |
|---|---|
| Level Found | < 0.01 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Sodium (total) | |
|---|---|
| Level Found | 0.05 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Iron (total) | |
|---|---|
| Level Found | 138 |
| Units | ppm |
| Reporting Limit | 50 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Calcium (total) | |
|---|---|
| Level Found | 0.02 |
| Units | % |
| Reporting Limit | 0.01 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Manganese (total) | |
|---|---|
| Level Found | 8060 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Zinc (total) | |
|---|---|
| Level Found | 9860 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Copper (total) | |
|---|---|
| Level Found | < 20.0 |
| Units | ppm |
| Reporting Limit | 20 |
| Method | MWL ME PROC 26 |
| Analyst Date | jdg9-2020/02/07 |
| Verified Date | tat9-2020/02/07 |
| Molybdenum (total) | |
|---|---|
| Level Found | < 1.0 |
| Units | mg/kg |
| Reporting Limit | 1 |
| Method | EPA 6010 |
| Analyst Date | ery3-2020/02/07 |
| Verified Date | kkh9-2020/02/09 |
For questions please contact:
Rob Ferris
Account Manager
(402)-829-9871
[email protected]
*All results are reported on an AS RECEIVED basis., ppm = parts per million, ppm = mg/kg.
The result(s) issued on this report only reflect the analysis of the sample(s) submitted.
Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.
Feeding Calculator
Calculate
Related Articles
-
4 New Formulas that Enhance Crop Yield
Learn more about our four latest fertilizers and n-stabilizers that can increase farming efficiency and improve crop yield potential.
-
Early Seeding Risks and Rewards
For the majority of crops, early seeding can significantly increase crop quality and yield. But how early can you plant before the risks outweigh the rewards?
Related Products
…
-
Active PLS™
Active PLS™ improves germination, early growth, and the efficiency of biological nitrogen fixation (BNF) for legumes.
Active PRIME™
The nutrient content in Active PRIME™ helps improve germination with significantly greater root growth for hardier seedlings.
Resources
-
Storage and Handling
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Download the App
A tool to help you manage Active AgriScience products for improved crop growth, yield, and profit.
Download it for free on Android or iOS!
