Active VPR™ PLUS
Active VPR™ PLUS contains urea-potassium phosphate and helps combat herbicide stress.
Active VPR™ PLUS contains urea-potassium phosphate and helps combat herbicide stress.
Active VPR™ PLUS can be used as a tank mix partner with your post-emergent herbicide application. Crops undergo stress as they go through the process of breaking down herbicide into less toxic components. Active VPR™ PLUS acts as a herbicide stress reliever with added Urea-Potassium Phosphate and is an alternative tank mix partner to UAN. Loaded with the three essential nutrients (N-P-K), Active VPR™ PLUS helps enhance herbicidal activity on weeds. Compared to UAN (28-0-0), Active VPR™ PLUS provides a superior nutrient composition (14-10-10) and is an economical option to provide all three macro elements during the early stage of crop growth.
Apply as a foliar spray. Please see the compatibility chart when mixing with herbicides.
Field Peas and Succulent Peas: apply at the 4-5 leaf stage (herbicide timing).
Soybean and other Dry Edible Beans: apply at V1-V2 (first-second trifoliate/herbicide timing) stage.
14-10-10
ENHANCED HERBICIDAL ACTIVITY AND EARLY GROWTH
Contains urea-potassium phosphate and combats herbicide stress.
DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT. Apply as a foliar spray. Field Peas and Succulent Peas: apply at the 4-5 leaf stage (herbicide timing). Soybean and other Dry Edible Beans: apply at V1-V2 (first-second trifoliate/herbicide timing) stage.
MIXING RATES: Active VPR PLUS is compatible with Viper ADV, Python A, Python B, and Basagran Forte or Basagran (see compatibility chart for possible compatible mixtures). Mix one of the below compatible agrochemical combinations at the recommended rate, then add Active VPR PLUS at the rate of 2.5 L per hectare (1 L per acre) with a minimum of 100 L of water per hectare (40 L / acre) for ground applications and 30 L of water per 1 hectare (12 L / acre) for aerial applications.
MIXING SEQUENCE: 1. Keep agitator running while mixing. 2. Add ingredients in the following order: Water, Herbicide, Active VPR PLUS. 3. Mix well for 5 minutes before spraying on crop. If spraying is delayed, or interrupted, mix for a further 5 minute before resuming spraying. Spray early morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C (85°F). Avoid spraying on windy days.
COMPATIBILITY: This product is compatible with the post-emergent herbicides Viper ADV, Python A, Python B, Basagran and Basagran Forte. For use with other post emergent herbicides, conduct a jar test and apply to a small area of the crop prior to large scale use.
Agrochemical Mixture | Compatibility |
---|---|
Viper ADV + Active VPR PLUS | ✓ |
Basagran Forte + Active VPR PLUS | ✓ |
Viper ADV + Basagran Forte + Active VPR PLUS | ✓ |
Basagran + Active VPR PLUS | ✓ |
Viper ADV + Basagran + Active VPR PLUS | ✓ |
Python A + Python B + Active VPR PLUS | ✓ |
GUARANTEED MINIMUM ANALYSIS:
PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.
FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up at a minimum temperature of 8°C in a dry, well ventilated area away from food or feed storage.
DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.
FOR CHEMICAL EMERGENCY: Call +1 877-715-9305 and refer to SDS.
WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.
For Product Inquiries call 1-639-398-0485 or visit activeagriscience.com.
Manufactured by Active AgriScience Inc.: 3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada
Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.
Net weight:
13.0 kg (28.7 lbs)
Net contents:
10 L (2.6 gal)
This product is compatible with the post-emergent herbicides Viper ADV, Python A, Python B, Basagran and Basagran Forte. For use with other post emergent herbicides, conduct a jar test and apply to a small area of the crop prior to large scale use.
Active VPR PLUS COMPATIBILITY WITH HERBICIDES |
---|
COMPATIBLE | |||
---|---|---|---|
Basagran | |||
Basagran Forte | |||
Glyphosate | |||
Liberty 150SN | |||
Odyssey Ultra NXT | |||
Python A | |||
Python B | |||
Viper ADV |
SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION | |
PRODUCT IDENTIFIER | Active VPR PLUS 14-10-10 |
PRODUCT USE | Agricultural fertilizer |
MANUFACTURERS NAME | Active AgriScience Inc. |
ADDRESS | 3422 Millar Avenue Saskatoon S7K 5Y7 Saskatchewan, Canada |
EMERGENCY TELEPHONE | +1 877-715-9305 |
DATE | May 31, 2022 |
PREPARED BY | Active AgriScience Inc. |
USE RESTRICTIONS | For professional use only. Use only as labeled. |
SECTION 2 – HAZARDS IDENTIFICATION | |
GHS CLASSIFICATION | Based on the available information, this material is not considered hazardous by HPR (WHMIS 2015) or the OSHA Hazard Communication Standard (29 CFR 1910.1200). |
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS |
Contains no hazardous ingredients ≥ to 0.1%. |
SECTION 4 – FIRST AID MEASURES | |
EYE CONTACT | Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. |
SKIN CONTACT | Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. |
INHALATION | Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. |
INGESTION | Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. |
Most Important Symptoms, both acute & delayed | No known adverse effects. Treat symptomatically. |
SECTION 5 – FIRE FIGHTING MEASURES | |
FLAMMABLE | Product will not burn or support combustion. |
MEANS OF EXTINCTION | Use extinguishing methods appropriate for the surrounding fire. |
FLASHPOINT & METHOD | NAP |
UPPER FLAMMABLE LIMIT | NAP |
LOWER FLAMMABILITY LIMIT | NAP |
AUTO IGNITION TEMPERATURE | NAP |
SENSITIVITY TO IMPACT | NAP |
SENSITIVITY TO STATIC DISCHARGE | NAP |
HAZARDOUS COMBUSTION PRODUCTS | Toxic and / or irritating gases may be released during a fire. |
SECTION 6 – ACCIDENTAL RELEASE MEASURES | |
LEAK & SPILL PROCEDURES | Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place into suitable clean containers for later disposal. Do not release into drains or the environment. |
SECTION 7 – HANDLING AND STORAGE | |
HANDLING | Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work. |
STORAGE | KEEP OUT OF REACH OF CHILDREN. Store locked up at a minimum temperature of 8°C in a dry, well ventilated area away from food or feed storage. |
SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION | |
EXPOSURE LIMITS | Not available. |
ENGINEERING CONTROLS | Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator. |
PERSONAL PROTECTIVE EQUIPMENT | |
Skin | The use of protective gloves is recommended when handling or applying this product. |
Eyes | The use of eye protection is recommended when handling or applying this product. |
Respirator | If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product. |
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE | Liquid |
COLOUR | Light blue |
BOILING POINT | NAV |
EVAPORATION RATE | NAV |
ODOUR | NAV |
SOLUBILITY IN WATER | Soluble |
APPEARANCE | Light blue liquid |
VISCOSITY | NAV |
FREEZING POINT | NAV |
SPECIFIC GRAVITY | 1.29 g/cm3 |
pH | 7.0 – 7.5 |
ODOUR THRESHHOLD | NAV |
SECTION 10 – STABILITY AND REACTIVITY | |
CHEMICAL STABILITY | Stable under normal conditions of use and storage. |
INCOMPATIBLE WITH OTHER SUBSTANCES | Not available. |
HAZARDOUS DECOMPOSING PRODUCTS | Toxic and/or irritating gases may be released during a fire. |
SECTION 11 – TOXICOLOGICAL INFORMATION | |
ACUTE TOXICITY | Acute Oral: Does not meet criteria. Acute Dermal: Does not meet criteria. |
CHRONIC TOXICITY | Long term inhalation of mists may cause central nervous system and lung effects. |
EYE / SKIN IRRITATION | Not available. |
SENSITIZATION | Not available. |
CARCINOGENICITY | No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH. |
REPRODUCTIVE TOXICITY | Not available. |
MUTAGENICITY | Not available. |
SECTION 12 – ECOLOGICAL INFORMATION | |
ECOTOXICITY | Not available. |
SECTION 13 – DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL | Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations. |
SECTION 14 – TRANSPORT INFORMATION | |
SHIPPING | TDG: Not a dangerous good for transport. DOT: Not a dangerous good for transport. |
SECTION 15 – REGULATORY INFORMATION |
This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200). |
SECTION 16 – OTHER INFORMATION |
To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations. Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws. The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material. |
The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.
13611 B Street • Omaha, Nebraska 68144-3693 • (402) 334-7770
www.midwestlabs.com
Sample ID: Active VPR PLUS
Lab Number: 8777984
Arsenic (total) | |
---|---|
Level Found | < 5.0 |
Units | mg/kg |
Reporting Limit | 5 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Cadmium (total) | |
---|---|
Level Found | < 0.50 |
Units | mg/kg |
Reporting Limit | 0.5 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Chromium (total) | |
---|---|
Level Found | < 1.00 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Cobalt (total) | |
---|---|
Level Found | < 1.00 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Copper (total) | |
---|---|
Level Found | < 1.0 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Mercury (total) | |
---|---|
Level Found | < 0.05 |
Units | mg/kg |
Reporting Limit | 0.05 |
Method | EPA 7471 |
Analyst Date | trh1-2020/07/20 |
Verified Date | kkh9-2020/07/20 |
Molybdenum (total) | |
---|---|
Level Found | 1.9 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Nickel (total) | |
---|---|
Level Found | < 1.0 |
Units | mg/kg |
Reporting Limit | 1 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Lead (total) | |
---|---|
Level Found | < 5.0 |
Units | mg/kg |
Reporting Limit | 5 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Selenium (total) | |
---|---|
Level Found | < 10.0 |
Units | mg/kg |
Reporting Limit | 10 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Zinc (total) | |
---|---|
Level Found | 15.9 |
Units | mg/kg |
Reporting Limit | 2 |
Method | EPA 6010 |
Analyst Date | ery3-2020/07/14 |
Verified Date | kkh9-2020/07/20 |
Nitrogen (total) | |
---|---|
Level Found | 14.42 |
Units | % |
Reporting Limit | 0.01 |
Method | MWL WC PROC 55 |
Analyst Date | kjs3-2020/07/14 |
Verified Date | tat9-2020/07/15 |
Phosphate (P2O5) | |
---|---|
Level Found | 9.69 |
Units | % |
Reporting Limit | 0.1 |
Method | MWL ME PROC 26 |
Analyst Date | Auto-2020/07/15 |
Verified Date | tat9-2020/07/15 |
Potash (K2O) | |
---|---|
Level Found | 9.8 |
Units | % |
Reporting Limit | 0.05 |
Method | MWL ME PROC 26 |
Analyst Date | Auto-2020/07/15 |
Verified Date | tat9-2020/07/15 |
For questions please contact:
Rob Ferris
Account Manager
(402)-829-9871
[email protected]
Sample(s) was prepared for EPA 6010 analysis by EPA 3050b.
*All results are reported on an AS RECEIVED basis, ppm = parts per million, ppm = mg/kg.
The result(s) issued on this report only reflect the analysis of the sample(s) submitted.
Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.
Learn more about our four latest fertilizers and n-stabilizers that can increase farming efficiency and improve crop yield potential.
Herbicides may not cause visible damage to your crop, but they still cause herbicide stress which can set the plant back during a critical stage of growth.
Modern agricultural technology can help prepare your crop for the worst conditions, but farmers still struggle with the many manifestations of crop stress.
Active VPR™ acts as a post-emergent herbicide stress reliever while acting synergistically with the herbicide to increase its efficacy on weeds.
The nutrient content in Active PodFILL™ enhances pollen development and fertilization of peas, lentils, soybeans.
The nutrient content in Active BUILD™ helps promote growth above and below ground while protecting young plants from stressors.
Determine whether your crop has any nutritional deficiencies that might limit its yield.
With unexpected variables such as soil conditions, weather, pests, diseases, tank mix partners, applications rates, and errors in mixing and application, we encourage all prospective customers to run trials of our products before broad acreage adoption. Please visit our Trial Protocol page to learn more.
A guide for proper storage and handling of Active AgriScience products to ensure their long-term efficacy.
Active AgriScience has sales representatives that help us support farmers across the globe. Please find the sales rep closest to you and contact them about our products.