Active BUILD jug
Field,Early Growth
Grains,Oilseeds,Vegetables,

Active BUILD™

The nutrient content in Active BUILD™ helps promote growth above and below ground while protecting young plants from stressors.

Download our app for easy management of Active AgriScience products.

Description

Watching those fields turn from brown to green is exciting, but those growth spurts take a lot of energy and can cause plant stress. Active BUILD™ provides a shot of much needed extra nutrients as well as support for photosynthesis and protection from drought.

When to Use

Herbicide timing, e.g.:  3-5 leaf stage, BBCH 13-15

Benefits

Active BUILD™ provides the nutrients that young plants need to continue strong, healthy growth and overcome the stress caused by rapid growth, herbicides, and unfavourable environmental conditions. Roots continue to deepen, while stalks strengthen and foliage increases. The high N-P-K concentration in Active BUILD is supplemented with boron, manganese, molybdenum and zinc, supporting additional root growth as well as stronger stalks and increased leafing, even under drought stress.

How it Works

Active BUILD™ provides the highest nutrient concentrations package available in a liquid mixture along with Active AgriScience’s proprietary activation formula. Nitrogen and potassium are in easy-to-absorb complexes, and phosphorous is in two different forms for greater absorption, ensuring that plants benefit from application. Added organic acids enhance photosynthetic capacity, allowing plants to benefit from more energy. Active BUILD also reduces evapotranspiration, helping to protect plants from drought conditions.

While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.

*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).

2-30-6

IN CROP GROWTH PROMOTER

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

General Crop Use: apply at herbicide timing as a foliar spray using 2.5 L per hectare (1 L per acre) with a minimum of 50 L of water per hectare (20 L / acre) for ground applications and 30 L of water per hectare (12 L / acre) for aerial applications. Allow at least 3-4 weeks between applications.

Wheat and oats: apply at BBCH 13-15 (3-5 leaf stage).

Canola: apply at BBCH 12-14 (2-4 leaf stage).

Soybean: apply at V1-V2 (first-second trifoliate).

Peas, lentils, and other pulse crops, potato, corn: apply at the 4-5 leaf stage. Flax: apply when plants have 3 sets of true leaves.

Spray early morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C (85°F). Avoid spraying on windy days. Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: This product is compatible with most pesticides and fertilizers. If compatibility is uncertain, conduct a jar test prior to use.

Add tank mix partners in the following order: Water, Agrochemical, Active BUILD™. Keep agitator running while mixing and spraying.

CAUTION: THIS FERTILIZER CONTAINS BORON, MANGANESE, MOLYBDENUM AND ZINC AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

GUARANTEED MINIMUM ANALYSIS:

  • Total Nitrogen (N): 2%
  • Available Phosphate (P2O5): 30%
  • Soluble Potash (K2O):  6%
  • Boron (B)(actual):  0.3%
  • Manganese (Mn)(actual): 1.0%
  • Molybdenum (Mo): 0.13%
  • Zinc (Zn)(actual):  2.3%

DANGER HAZARD STATEMENTS: CAUSES SEVERE EYE IRRITATION. CAUSES SKIN IRRITATION. CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of product / container in accordance with Federal, Provincial, and Local regulations.

FOR CHEMICAL EMERGENCY CALL: 1.639.398.0485.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

made in canada

Manufactured by Active AgriScience Inc.:
3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Net weight:
14.9 kg (32.9 lbs)

Net contents:
10 L (2.6 gal)

Feeding Calculator

Independent 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 21‑104‑4008
REPORT DATE: Apr 14, 2021
RECEIVED DATE: Apr 14, 2021
SEND TO: 52790
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
Active Agriscience Inc
Fertilizer Samples

Sample ID: Active BUILD

Lab Number: 8890872

Nitrogen (total)
Level Found*2.23
Units%
Reporting Limit0.01
MethodMWL WC PROC 55
Analyst Datemdh0-2021/04/13
Verified Dateeas2-2021/04/13
Phosphate (P2O5)
Level Found*30.2
Units%
Reporting Limit0.1
MethodMWL WC PROC 04
Analyst DateAuto-2021/04/14
Verified Dateeas2-2021/04/14
Potash (K2O)
Level Found*6.49
Units%
Reporting Limit0.05
MethodMWL ME PROC 26
Analyst DateAuto-2021/04/12
Verified Dateeas2-2021/04/12
Boron (total)
Level Found*3630
Unitsppm
Reporting Limit100
MethodMWL ME PROC 26
Analyst Datejdg9-2021/04/09
Verified Dateeas2-2021/04/12
Manganese (total)
Level Found*10800
Unitsppm
Reporting Limit20
MethodMWL ME PROC 26
Analyst Datejdg9-2021/04/09
Verified Dateeas2-2021/04/12
Molybdenum (total)
Level Found*1360
Unitsmg/kg
Reporting Limit1
MethodEPA 6010
Analyst Datetrh1-2021/04/09
Verified Datekkh9-2021/04/12
Zinc (total)
Level Found*23500
Unitsppm
Reporting Limit20
MethodMWL ME PROC 26
Analyst Datejdg9-2021/04/09
Verified Dateeas2-2021/04/12

For questions please contact:
Rob Ferris Signature
Rob Ferris
Account Manager
(402)-829-9871
[email protected]

*All results are reported on an AS RECEIVED basis., ppm=parts per million, ppm=mg/kg.

The result(s) issued on this report only reflect the analysis of the sample(s) submitted.

Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.

Trial Protocol

Trial Protocol

To verify outcomes, we highly recommend testing Active AgriScience's products in small, replicated plot trials before using them in large acreages. As yield increases can be affected by variables in soils, weather conditions, presence of pests, disease occurrences, cultivar differences, etc, Active AgriScience Inc. cannot guarantee that its Foliar Nutrients, while providing added nutrition to the plant, will result in a given yield increase, if any. Please follow this protocol when conducting the plot trials. Always contact your Sales Rep or technical help at Active AgriScience if you are unclear on any of the steps explained in following protocol.

Protocol for conducting small plot trials with the following Active AgriScience Inc's Foliar products:

Active Boron, Active BUILD, Active COMPLETE, Active Copper, Active FLOWER, Active GrainFILL, Active Iron, Active KONNECT, Active PodFILL, Active UAN, Active VPR, Active VPR PLUS, Active Zinc, Proform N, Active THRIVE, Active SEED.

Minimum Plot Size: 5' x 21' (1.5 x 6.5 metres).

Site Selection: All the treatments should be located side by side in a given location.

Prepare Data Recording Chart: Use the Active AgriScience template or one of your own. Be sure to include spaces for date, time, chemical(s) sprayed, lot numbers, spray rate, crop stage, 10 Day Observation, Yield, Signature & Date Lines: Farmer or Farmer's Rep, Sales rep.

Replicates: Minimum 3 replicates. Treatments should be randomly allocated within a replicate. If there is a gradient in the land (slope, moisture, nutrients, soil) please allocate the treatments in a Randomized Complete Block Design (RCBD).

Treatments: Make sure the products are applied at correct growth stage of the crop and follow the label instructions. Foliar Spraying is best done in the early morning.

  • Treatment 1 – Check: Regular Program farmer is currently practicing.
  • Treatment 2 – Foliar Nutrient Plot: Regular Program + Active AgriScience's Foliar Nutrient.
  • Treatment 3 – Foliar Nutrient + Tank Mix Partner: (if farmer is planning to apply Active AgriScience's foliar nutrient with an herbicide/fungicide/insecticide/other agrochemicals) Regular Program + Tank Mix Partner + Active AgriScience's Foliar Nutrient.

Please follow the Active AgriScience products' compatibility chart for chemical compatibility. If unsure, please do a small jar test before mixing.

Leave Guard Rows on either side of a replicate.

Mixing Rates: Follow label recommendations.

Mixing Sequence:

  1. Water.
  2. Agrochemical (herbicide/fungicide/insecticide/other agrochemical).
  3. Active AgriScience's Foliar Nutrient.

Mixing Instructions:

  1. Ensure the tank is absolutely clean with no residues present - especially if the sprayer has been previously used for spraying herbicides.
  2. Add half of the recommended water volume.
  3. Begin agitation.
  4. Add recommended dose of agrochemical if tank mixing with an agrochemical.
  5. Add your chosen Active AgriScience's Foliar Nutrient product.
  6. Add rest of the water.
  7. Continue agitating the mixture for 3-5 minutes before spraying.

Spray Instructions:

  1. Test the sprayer in an open area for proper spray droplets and make sure the emitters are working properly.
  2. Early morning is better for foliar sprays.
  3. Start spraying check first and then continue with rest of the treatments sequentially.
  4. If any other agrochemicals are applied to control pests and diseases, apply them equally on all replicates.
  5. Maintain agitation while spraying.

After Spraying:

  1. Record date and time on prepared chart.
  2. Record the chemical sprayed, lot numbers, spray rates.
  3. Record the stage of the crop.
  4. Properly place the signs with treatment applied in each replicate.
  5. Observe the trial around 10 days after the treatment application and make notes on how the crop is progressing, any visual differences, any pest and disease occurrences to be noticed.

Harvesting and Data Reporting:

  1. Inform the rep when planning to harvest. Presence of the Sales Rep is mandatory when harvesting.
  2. Harvest the middle two rows of each replicate of each treatment for yield assessment.
  3. Use a weigh wagon or any other accurate method of measuring the yield.
  4. Record the yield as bu/acre.
  5. Both the farmer/farmer's representative and the rep can witness the weigh numbers.

Photos

You may wish to take photos just before spraying, at the 10-day observation point and just prior to harvest to aid in analysis.

Please ensure the Sales Rep is able to get a copy of the chart.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active BUILD 2-30-6

PRODUCT USE

Agricultural fertilizer

MANUFACTURERS NAME

Active AgriScience Inc.

ADDRESS

3422 Millar Avenue
Saskatoon
S7K 5Y7
Saskatchewan, Canada

EMERGENCY TELEPHONE

1-639-398-0485

DATE

July 7, 2021

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

HPR (WHMIS 2015)

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

Reproductive toxicity: Category 1B

OSHA Hazard Communication Standard (29 CFR 1910.1200)

Eye Damage / Irritation: Category 2A

Skin Corrosion / Irritation: Category 2

Reproductive toxicity: Category 1B

WHMIS Harmful/irritant

WHMIS Health Hazards

DANGER

HAZARD STATEMENTS: MAY CAUSE EYE AND SKIN IRRITATION. CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD. PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear chemical resistant gloves, clothing, eye protection, and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work. FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Phosphoric acid

7664-38-2

30 – 50%

Boric acid

10043-35-3

1-3%

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

Most Important Symptoms, both acute & delayed

May cause eye and skin irritation. Contains boron: may damage fertility or the unborn child.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic and / or irritating gases may be released during a fire.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear chemical resistant gloves, coveralls, eye goggles and face protection–See SECTION 8. If mists are present and ventilation is poor or absent, wear an air purifying respirator. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

Wear chemical resistant gloves, clothing and face protection when handling or applying this product.

Eyes

Wear chemical resistant goggles when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Pale blue

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Fully soluble

APPEARANCE

Pale blue liquid

VISCOSITY

NAV

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.4-1.5 g/cm3

pH

1.25 – 1.35

ODOUR THRESHHOLD

NAV

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic and/or irritating gases may be released during a fire.

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: does not meet criteria.

Acute Dermal: does not meet criteria.

CHRONIC TOXICITY

Long term inhalation of mists may cause central nervous system and lung effects.

EYE / SKIN IRRITATION

May cause eye and skin irritation.

SENSITIZATION

Not available.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Contains boron: may damage fertility or the unborn child.

MUTAGENICITY

Not available.

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Not available.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Compatibility

Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

Active BUILD COMPATIBILITY WITH PESTICIDES
Active BUILD COMPATIBILITY WITH HERBICIDES
COMPATIBLE
Achieve
Ally
Agral 90 or AgSurf II
Armezon
Ares
Attain XCA (Fluroxypyr)
Attain XCB (2,4-D LV Ester)
Avenge 200 C
Axial
Banvel ll
Barricade ll
Buctril M
Centurian
Clever
Curtail M
Equinox
Everest/Sierra
Frontline
Flax Max
Glyphosate
Infinity
Liberty
MCPA Amine 500
Odyssey
Odyssey NXT
Odyssey Ultra
Poast Ultra
Puma Advance
Pursuit 240
Refine SG
Reflex
Simplicity
Solo
Stellar
Traxos
Varro
Velocity
Venture
CAUTION
Dyvel DS
Estaprop XT
MCPA Ester 500
Prestige XC
Prestige XCA
Prestige XCB
Sencor 75 DF
Spectrum
Spectrum A (Florosulam)
Spectrum B
Target
Thumper
INCOMPATIBLE
Basagran
Viper ADV
Active BUILD COMPATIBILITY WITH FUNGICIDES
COMPATIBLE
Acapela
Allegro
Bravo 500
Caramba
Delaro 325 SC
Dithane
Folicur 250 EC
Headline EC
Priaxor
Proline
Prosaro 250 EC
Quadris
Quilt
Rovral Flo
Tilt
Twinline
Vertisan
CAUTION
Astound
Manzate
Lance WDG
Quash
Active BUILD COMPATIBILITY WITH INSECTICIDES
COMPATIBLE
Decis
Diazanon
Lannate
Malathion 85E
Malathion 500
Matador
Pounce
Sevin XLR Plus
CAUTION
Coragen
Furadan
Lorsban
Active BUILD WITH TANK MIXTURES
COMPATIBLE TANK MIX #1
Agchem 1Travallas™ Herbicide:
0.2 L / ac
Agchem 2Axial® Herbicide: 0.5 L / ac
FertilizerActive BUILD: 1.0 L /ac
Agchem Water5 GPA
COMPATIBLE TANK MIX #2
Agchem 1Everest®3.0 Herbicide:
0.0388 L / ac
Agchem 2Travallas™ Herbicide:
0.2 L / ac
Surfactant/
Adjuvant		Non-ionic surfactant:
0.04725 L / ac
FertilizerActive BUILD: 0.5 L / ac
Agchem Water5 GPA
COMPATIBLE TANK MIX #3
Agchem 1Everest®3.0 Herbicide:
0.0388 L / ac
Agchem 2Cirpreme™ XC co-pack (Paradigm™ herbicide 10 g / ac + Lontrel™ XC: 0.051 L / ac
Agchem 3MCPA Ester 600 herbicide:
0.2 L / ac
Surfactant/
Adjuvant		Non-ionic surfactant:
0.095 L / ac
FertilizerActive BUILD: 1.0 L /ac
Agchem Water10 GPA
COMPATIBLE TANK MIX #4
Agchem 1Centurion herbicide:
60 ac /case
Agchem 2Liberty® 150 SN herbicide: 1.35 L / ac
Agchem 3Facet™ L herbicide:
0.113 L / ac
FertilizerActive BUILD: 1.0L / acre
Agchem Water10 GPA
COMPATIBLE TANK MIX #5
Agchem 1Travallas Herbicide: 0.2 L / ac
Agchem 2Axial Herbicide: 0.5 L / ac
FertilizerActive BUILD: 1.0 L /ac
Agchem Water5 GPA
COMPATIBLE TANK MIX #6
Agchem 1Travallas Herbicide: 0.2 L / ac
Agchem 2Axial Herbicide: 0.5 L / ac
FertilizerActive BUILD: 1.0 L /ac
Agchem Water5 GPA
Active BUILD WITH ACTIVE AGRISCIENCE PRODUCTS
COMPATIBLE
Active PRIME
Active COMPLETE
Active KONNECT
Proform N
Active COPPER
Active MANGANESE
Active ZINC
INCOMPATIBLE
Active FLOWER
Active Boron

Related Products