Field,Field,Early Growth, Ripening
Grains,Oilseeds,Pulses,Vegetables,

Proform N™

The nutrient content in Proform N™ supports photosynthesis and the production of proteins for stronger, healthier crops.

Download our app for easy management of Active AgriScience products.

Description

Proform N™ can be applied as a foliar spray and is specially formulated to allow better nitrogen absorption.

When to Use

Apply during the early growth phase (herbicide timing) and after pollination (fungicide timing).

Benefits

Proform N™ provides both readily available nitrogen as well as slow release nitrogen, delivering both quick and long-lasting nutrition.

Nitrogen is essential for plant life and growth and is therefore a component of many fertilizers. Proform N™ provides both readily available and slow release nitrogen, allowing it to be absorbed through the plant leaves efficiently. Proform N™ is also specially formulated to protect leaves from burning.

Increased Chlorophyll

By allowing the absorption of nitrogen, the development of chlorophyll is supported, fostering photosynthetic energy production and storage for increased growth.

Increased Protein

Increased nitrogen absorption supports the production of plant proteins, including DNA and RNA, allowing plants to manifest their full genetic potential.

Supported Growth

By supporting the production of chlorophyll, protein and nucleic acids, Proform N helps support plant growth.

How it Works

The amino acids and urea nitrogen in Proform N™ provide for easy foliar absorption without leaf burn and allow more nitrogen to be absorbed through the plant leaves and translocate into nitrogen demanding tissues.

WHEAT • 2 YEAR AVERAGE YIELD DATA *
2017-2018
bu/acre
75
70
65
60
55
50
45
40
35
Proform NTM
+2.4 bu/acre
CANOLA • 2 YEAR AVERAGE YIELD DATA *
2016-2017
bu/acre
55
50
45
40
35
30
25
20
15
Proform NTM
+2.2 bu/acre
SOYBEAN • YIELD DATA *
2017
bu/acre
55
50
45
40
35
30
25
20
15
Proform NTM
+3.3 bu/acre
PEAS • 1 YEAR AVERAGE YIELD DATA *
2018
bu/acre
70
65
60
55
50
45
40
35
30
Proform NTM
+7.0 bu/acre

*3rd party field research with Ag-Quest, BC Grain, ICMS, Mara and New-Marc Research.

While Active AgriScience stands behind the quality of our products (see guarantee below), Active AgriScience cannot guarantee the same, or similar, yield results due the effects of variables outside of our control (soil conditions, weather, pests, diseases, tank mix partners, application rates, and errors in mixing and application). We encourage all prospective customers to run trials of our products before broad acreage adoption.

Active AgriScience 100% guarantees the quality of its products with a 15-month free replace warranty*. To aid consumers to make informed purchasing decisions all Yield Data posted on our Website and App is from Certified 3rd Party Tests.

*Improper use and/or storage, as per label instructions, voids the warranty. Product must be stored out of direct sun light within a temperature range of 5 – 35°C. Warranty is limited to the cost of the product and may be satisfied by free replacement of defective product, a credit note or refund (at the discretion of Active AgriScience Inc).

21-0-0

PROMOTING HEALTHIER CROP GROWTH

DIRECTIONS FOR USE: READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

Wheat, canola, soybean, peas, lentils and other pulses, corn, potato, flax:  Apply as a foliar spray at 2.5 L per hectare (1 L / acre) with a minimum of 50 L of water per hectare (20 L / acre).  Apply during the early growth phase (herbicide timing) and after pollination (fungicide timing). Spray early in the morning or late afternoon when the sun is lower in the sky. Do not apply when air temperatures are above 29°C. Avoid spraying on windy days.

COMPATIBILITY: This product is compatible with most pesticides and fertilizers. If compatibility is uncertain, conduct a jar test before use.

Mix with other products in the following order: Water, Agrochemical, Proform N™. Keep agitator running while mixing and spraying.

GUARANTEED MINIMUM ANALYSIS:

  • Total Nitrogen (N): 21%
  • Magnesium (Mg) (actual): 0.15%
  • Iron (Fe) (actual):  0.05%
  • Sulfur (S): 0.2%

Registration number: 2019157A Fertilizers Act

HAZARD STATEMENTS: This material is not considered hazardous by HPR (WHMIS 2015) or the OSHA Hazard Communication Standard (29 CFR 1910.1200).

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

FOR CHEMICAL EMERGENCY CALL: 1-639-398-0485.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

made in canada

Manufactured by Active AgriScience Inc.:
3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada


Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Feeding Calculator

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Proform N 21-0-0

PRODUCT USE

Agricultural fertilizer

MANFACTURERS NAME

Active AgriScience Inc.

STREET ADDRESS

3422 Millar Avenue

CITY

Saskatoon

POSTAL CODE

S7K 5Y7

DATE

July 15, 2021

PROVINCE

Saskatchewan, Canada

EMERGENCY TELEPHONE

1-639-398-0485

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

DISTRIBUTORS NAME

 

STREET ADDRESS

 

CITY

 

POSTAL CODE

 

COUNTRY

 

EMERGENCY TELEPHONE

 

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

Based on the available information, this material is not considered hazardous by HPR (WHMIS 2015) or the OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

Contains no hazardous ingredients to 0.1%.

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

Most Important Symptoms, both acute & delayed

No known adverse effects. Treat symptomatically.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Carbon monoxide, carbon dioxide, nitrogen oxides (NOx).

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

The use of protective gloves is recommended when handling or applying this product.

Eyes

The use of eye protection is recommended when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Amber

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Soluble

APPEARANCE

Amber coloured liquid

VISCOSITY

NAV

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.13 g/cm3

pH

5.0 – 6.0

ODOUR THRESHHOLD

NAV

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Carbon monoxide, carbon dioxide, nitrogen oxides (NOx).

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: Does not meet criteria.

Acute Dermal: Does not meet criteria.

CHRONIC TOXICITY

Based on the available information, product does not meet criteria for chronic toxicity.

EYE / SKIN IRRITATION

Not available.

SENSITIZATION

Not available.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Not available.

MUTAGENICITY

Not available.

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Not available.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Independent 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 20‑072‑4076
REPORT DATE: March 12, 2020
RECEIVED DATE: March 10, 2020
SEND TO: 52790
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
FOLIAR FERTILIZER
21-0-0

Sample ID: Proform N

Lab Number: 8733793

Magnesium (total)
Level Found 0.15
Units %
Reporting Limit 0.01
Method MWL ME PROC 26
Analyst Date jdg9-2020/03/11
Verified Date tat9-2020/03/12
Sulfur (total)
Level Found 0.24
Units %
Reporting Limit 0.05
Method MWL ME PROC 26
Analyst Date jdg9-2020/03/11
Verified Date tat9-2020/03/12
Iron (total)
Level Found 68.9
Units ppm
Reporting Limit 50.0
Method MWL ME PROC 26
Analyst Date jdg9-2020/03/11
Verified Date tat9-2020/03/12
Nitrogen (total)
Level Found 21.83
Units %
Reporting Limit 0.01
Method MWL WC PROC 55
Analyst Date hns0-2020/03/12
Verified Date tat9-2020/03/12
Trial Protocol

Trial Protocol

To verify outcomes, we highly recommend testing Active AgriScience's products in small, replicated plot trials before using them in large acreages. As yield increases can be affected by variables in soils, weather conditions, presence of pests, disease occurrences, cultivar differences, etc, Active AgriScience Inc. cannot guarantee that its Foliar Nutrients, while providing added nutrition to the plant, will result in a given yield increase, if any. Please follow this protocol when conducting the plot trials. Always contact your Sales Rep or technical help at Active AgriScience if you are unclear on any of the steps explained in following protocol.

Protocol for conducting small plot trials with the following Active AgriScience Inc's Foliar products:

Active Boron, Active BUILD, Active COMPLETE, Active Copper, Active FLOWER, Active GrainFILL, Active Iron, Active KONNECT, Active PodFILL, Active UAN, Active VPR, Active VPR PLUS, Active Zinc, Proform N.

Minimum Plot Size: 5' x 21' (1.5 x 6.5 metres).

Site Selection: All the treatments should be located side by side in a given location.

Prepare Data Recording Chart: Use the Active AgriScience template or one of your own. Be sure to include spaces for date, time, chemical(s) sprayed, lot numbers, spray rate, crop stage, 10 Day Observation, Yield, Signature & Date Lines: Farmer or Farmer's Rep, Sales rep.

Replicates: Minimum 3 replicates. Treatments should be randomly allocated within a replicate. If there is a gradient in the land (slope, moisture, nutrients, soil) please allocate the treatments in a Randomized Complete Block Design (RCBD).

Treatments: Make sure the products are applied at correct growth stage of the crop and follow the label instructions. Foliar Spraying is best done in the early morning.

  • Treatment 1 – Check: Regular Program farmer is currently practicing.
  • Treatment 2 – Foliar Nutrient Plot: Regular Program + Active AgriScience's Foliar Nutrient.
  • Treatment 3 – Foliar Nutrient + Tank Mix Partner: (if farmer is planning to apply Active AgriScience's foliar nutrient with an herbicide/fungicide/insecticide/other agrochemicals) Regular Program + Tank Mix Partner + Active AgriScience's Foliar Nutrient.

Please follow the Active AgriScience products' compatibility chart for chemical compatibility. If unsure, please do a small jar test before mixing.

Leave Guard Rows on either side of a replicate.

Mixing Rates: Follow label recommendations.

Mixing Sequence:

  1. Water.
  2. Agrochemical (herbicide/fungicide/insecticide/other agrochemical).
  3. Active AgriScience's Foliar Nutrient.

Mixing Instructions:

  1. Ensure the tank is absolutely clean with no residues present - especially if the sprayer has been previously used for spraying herbicides.
  2. Add half of the recommended water volume.
  3. Begin agitation.
  4. Add recommended dose of agrochemical if tank mixing with an agrochemical.
  5. Add your chosen Active AgriScience's Foliar Nutrient product.
  6. Add rest of the water.
  7. Continue agitating the mixture for 3-5 minutes before spraying.

Spray Instructions:

  1. Test the sprayer in an open area for proper spray droplets and make sure the emitters are working properly.
  2. Early morning is better for foliar sprays.
  3. Start spraying check first and then continue with rest of the treatments sequentially.
  4. If any other agrochemicals are applied to control pests and diseases, apply them equally on all replicates.
  5. Maintain agitation while spraying.

After Spraying:

  1. Record date and time on prepared chart.
  2. Record the chemical sprayed, lot numbers, spray rates.
  3. Record the stage of the crop.
  4. Properly place the signs with treatment applied in each replicate.
  5. Observe the trial around 10 days after the treatment application and make notes on how the crop is progressing, any visual differences, any pest and disease occurrences to be noticed.

Harvesting and Data Reporting:

  1. Inform the rep when planning to harvest. Presence of the Sales Rep is mandatory when harvesting.
  2. Harvest the middle two rows of each replicate of each treatment for yield assessment.
  3. Use a weigh wagon or any other accurate method of measuring the yield.
  4. Record the yield as bu/acre.
  5. Both the farmer/farmer's representative and the rep can witness the weigh numbers.

Photos

You may wish to take photos just before spraying, at the 10-day observation point and just prior to harvest to aid in analysis.

Please ensure the Sales Rep is able to get a copy of the chart.

Independent 3rd Party Yield Data

WHEAT • 2 YEAR AVERAGE YIELD DATA *
bu/acre
75
70
65
60
55
50
45
40
35
Proform NTM
+2.4 bu/acre
TREATMENT YIELD – 2017 (bu/acre) YIELD – 2018 (bu/acre) Ag-Quest YIELD – 2018 (bu/acre) New Era Ag 2 YEAR AVERAGE (bu/acre) % CHANGE
CONTROL 63.0 74.6 37.5 58.4 0
TREATMENT YIELD – 2017 (bu/acre) YIELD – 2018 (bu/acre) Ag-Quest YIELD – 2018 (bu/acre) New Era Ag 2 YEAR AVERAGE (bu/acre) % CHANGE
PROFORM N 65.6 77.7 39.2 60.8 5.9
CANOLA • 2 YEAR AVERAGE YIELD DATA *
bu/acre
55
50
45
40
35
30
25
20
15
Proform NTM
+2.2 bu/acre
TREATMENT YIELD – 2016 (bu/acre) YIELD – 2017 (bu/acre) 2 YEAR AVERAGE (bu/acre) % CHANGE
CONTROL 27.2 57.7 42.5 0
TREATMENT YIELD – 2016 (bu/acre) YIELD – 2017 (bu/acre) 2 YEAR AVERAGE (bu/acre) % CHANGE
PROFORM N 31.2 58.2 44.7 5
SOYBEAN • YIELD DATA – 2017 *
bu/acre
55
50
45
40
35
30
25
20
15
Proform NTM
+3.3 bu/acre
TREATMENT YIELD – 2017 (bu/acre) % CHANGE
CONTROL 42.0 0
TREATMENT YIELD – 2017 (bu/acre) % CHANGE
PROFORM N 45.3 7.9
PEAS • 1 YEAR AVERAGE YIELD DATA *
bu/acre
70
65
60
55
50
45
40
35
30
Proform NTM
+7.0 bu/acre
TREATMENT YIELD – 2018 (bu/acre) Ag-Quest YIELD – 2018 (bu/acre) New Era Ag AVERAGE (bu/acre) % CHANGE
CONTROL 35.0 61.6 48.3 0
TREATMENT YIELD – 2018 (bu/acre) Ag-Quest YIELD – 2018 (bu/acre) New Era Ag AVERAGE (bu/acre) % CHANGE
PROFORM N 40.0 62.5 51.3 6.1

*3rd party field research with Ag-Quest, BC Grain, ICMS, Mara and New-Marc Research.

Compatibility

Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

Proform N COMPATIBILITY WITH PESTICIDES
Proform N COMPATIBILITY WITH FUNGICIDES
COMPATIBLE
Acapela
Caramba
Delaro
Folicur 250 EC
Headline EC
Priaxor
Proline 480 SC
Agsurf or Agral 90
Prosaro 250 EC
Quadris
Quilt
Rovral FLO
Tilt 250E
Twinline
Vertisan
CAUTION
Allegro
Bravo 500
Dithane
Lance WDG
Quash
INCOMPATIBLE
Astound
NOT TESTED
Fuse
Kumulus DF
Serenade Max
Serenade CPB
Proform N COMPATIBILITY WITH INSECTICIDES
COMPATIBLE
Coragen
Decis
Diazanon
Lorsban
Malathion
Matador
Pounce
CAUTION
Furadan
Sevin XLR+
NOT TESTED
Cygon/Lagon
Lannate
Ripcord
Proform N WITH ACTIVE AGRISCIENCE PRODUCTS
COMPATIBLE
Active PRIME
Active BUILD
Active FLOWER
Active COMPLETE
Active KONNECT
Active BORON
Active COPPER
Active MANGANESE
Active ZINC