Field
Greenhouse
Orchard
Oilseeds
Grains
Pulses
Vegetables
Fruit
Berries
Hemp
Cannabis
active-podfill-jug
Field,Flowering
Pulses,

Active PODFILL™

The nutrient content in Active PodFILL™ enhances pollen development and fertilization of peas, lentils, soybeans.

Download our app for easy management of Active AgriScience products.

Description

More economical formula compared to other nutrient solutions tailored specifically to the enhance the pollination and fertilization of peas, lentils, soybeans and other beans.

When to Use

Soybean, peas, lentils and other pulse crops: apply once at the pre-bloom – 30% bloom stage.

How it Works

Active PODFILL™ contains nitrogen in the form of amine and micronutrients to maintain high enzymatic and hormonal activity during the reproductive phase of plant growth.

Potassium is provided to regulate anther dehiscence, pollen hydration/imbibition, and pollen tube growth, needed for successful fertilization, and to promote uniform fruit size and quality.

Easy to absorb and penetrate through membranes where it is needed, a boron-amine complex fosters pollen viability, seed set, carbohydrate and nucleic acid metabolism, cell differentiation and maturity, sugar transport, uptake of calcium, magnesium, potassium, synthesis of cytokinins, translocation of auxins, and root tip initiation.

8-4-12

SUPPORTING POLLINATION & FERTILIZATION OF PULSE CROPS

READ THE ENTIRE LABEL BEFORE USING THIS PRODUCT.

DIRECTIONS: SHAKE WELL BEFORE USING.

General Crop Use: Apply once at fungicide timing as a foliar spray using 2.5 L per hectare (1 L per acre) with between 50 – 100 L water per hectare (20 – 40 L / acre) for ground applications and 30 – 60 L of water per hectare (12 – 24 L / acre) for aerial applications. Allow a minimum of 3 weeks between applications.

Soybean, peas, lentils and other pulse crops: apply once at the pre-bloom – 30% bloom stage.

Use this product on the basis of soil and tissue analysis in accordance with recommendations of a qualified person or institution or apply according to recommendations in your approved nutrient program.

COMPATIBILITY: This product is compatible with most fertilizers, and pesticides. If compatibility is uncertain, conduct a jar test prior to use.

Add tank-mix partners in the following order: Water, Agrochemical, Active PODFILL™. Keep agitator running while mixing and spraying.

PHYTOTOXICITY: For crops not listed on this label, always test a small plot prior to commercial application and observe for 7-10 days for symptoms of phytotoxicity.

WARRANTY AND CONDITIONS OF SALE: Manufacturer warrants that this material conforms to the chemical description hereon and is reasonably fit for use as directed. No other warranty is made, either expressed or implied.

GUARANTEED MINIMUM ANALYSIS:

  • Total Nitrogen (N): 8%
  • Available Phosphate (P2O5): 4%
  • Soluble Potash (K2O): 12%
  • Boron (B)(actual): 2.0%

Fertilizers in the mixture are exempt from registration.

DANGER HAZARD STATEMENTS: CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

CAUTION: THIS FERTILIZER CONTAINS BORON AND SHOULD BE USED ONLY AS RECOMMENDED. IT MAY PROVE HARMFUL WHEN MISUSED.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

FOR CHEMICAL EMERGENCY CALL: 1-639-398-0485.

made in canada

Manufactured by Active AgriScience Inc.:
3422 Millar Avenue, Saskatoon, SK S7K 5Y7, Canada

Active AgriScience Inc. DISCLAIMER: Please read this limitation carefully as it impacts your legal rights. It is understood and agreed that Active AgriScience Inc. (“Active”) does not guarantee that use of this Product will yield any specific results. Active’s legal liability, and that of its employees or agents, arising from use of this product shall be limited to the cost paid for the product regardless of whether any loss arose from Active’s own negligence or breach of contract or any other cause. Under no circumstances shall Active be liable, beyond the cost paid for the product, for direct, consequential, incidental, or special damages, including, but not limited to, damage or destruction of a crop, reduced yield from any crop, or contamination of any property. Use or sale of this product confirms acceptance of this limitation of legal liability.

Net weight:
13.3 kg (29.3 lb)

Net contents:
10 L (2.6 gal)

Feeding Calculator

Independent 3rd Party Lab Analysis

The entirety of our products at Active AgriScience Inc. undergo third party testing and are retested with any change in formula.

REPORT NUMBER: 20‑258‑4062
REPORT DATE: Sept 14, 2020
RECEIVED DATE: Sept 04, 2020
SEND TO: 52790
REPORT OF ANALYSIS
For: (52790) Active Agriscience Inc
SAMPLE ANALYSIS

Sample ID: Active PodFILL

Lab Number: 8801815

Nitrogen (total)
Level Found 8.16
Units %
Reporting Limit 0.01
Method MWL WC PROC 55
Analyst Date kjs3-2020/09/09
Verified Date asl4-2020/09/14
Phosphate (P2O5)
Level Found 5.77
Units %
Reporting Limit 0.1
Method MWL ME PROC 26
Analyst Date Auto-2020/09/11
Verified Date asl4-2020/09/14
Potash (K2O)
Level Found 11.5
Units %
Reporting Limit 0.05
Method MWL ME PROC 26
Analyst Date Auto-2020/09/11
Verified Date asl4-2020/09/14
Arsenic (total)
Level Found < 5.0
Units mg/kg
Reporting Limit 5
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Cadmium (total)
Level Found < 0.50
Units mg/kg
Reporting Limit 0.5
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Chromium (total)
Level Found < 1.00
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Cobalt (total)
Level Found < 1.00
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Copper (total)
Level Found < 1.0
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Mercury (total)
Level Found < 0.05
Units mg/kg
Reporting Limit 0.05
Method EPA 7471
Analyst Date pjd8-2020/09/10
Verified Date trh1-2020/09/11
Molybdenum (total)
Level Found < 1.0
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Nickel (total)
Level Found < 1.0
Units mg/kg
Reporting Limit 1
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Lead (total)
Level Found < 5.0
Units mg/kg
Reporting Limit 5
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Selenium (total)
Level Found < 10.0
Units mg/kg
Reporting Limit 10
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Zinc (total)
Level Found 2.2
Units mg/kg
Reporting Limit 2
Method EPA 6010
Analyst Date ery3-2020/09/11
Verified Date trh1-2020/09/11
Boron (total)
Level Found 19700
Units ppm
Reporting Limit 100
Method MWL ME PROC 26
Analyst Date jdg9-2020/09/11
Verified Date asl4-2020/09/14

For questions please contact:
Rob Ferris Signature
Rob Ferris
Account Manager
(402)-829-9871
[email protected]

Sample(s) was prepared for EPA 6010 analysis by EPA 3050b.

*All results are reported on an AS RECEIVED basis., ppm = parts per million, ppm = mg/kg.

The result(s) issued on this report only reflect the analysis of the sample(s) submitted.

Our reports and letters are for the exclusive and confidential use of our clients and may not be reproduced in whole or in part, nor may any reference be made to the work, the results, or the company in any advertising, news release, or other public announcements without obtaining our prior written authorization.

Trial Protocol

Trial Protocol

To verify outcomes, we highly recommend testing Active AgriScience's products in small, replicated plot trials before using them in large acreages. As yield increases can be affected by variables in soils, weather conditions, presence of pests, disease occurrences, cultivar differences, etc, Active AgriScience Inc. cannot guarantee that its Foliar Nutrients, while providing added nutrition to the plant, will result in a given yield increase, if any. Please follow this protocol when conducting the plot trials. Always contact your Sales Rep or technical help at Active AgriScience if you are unclear on any of the steps explained in following protocol.

Protocol for conducting small plot trials with the following Active AgriScience Inc's Foliar products:

Active Boron, Active BUILD, Active COMPLETE, Active Copper, Active FLOWER, Active GrainFILL, Active Iron, Active KONNECT, Active PodFILL, Active UAN, Active VPR, Active VPR PLUS, Active Zinc, Proform N.

Minimum Plot Size: 5' x 21' (1.5 x 6.5 metres).

Site Selection: All the treatments should be located side by side in a given location.

Prepare Data Recording Chart: Use the Active AgriScience template or one of your own. Be sure to include spaces for date, time, chemical(s) sprayed, lot numbers, spray rate, crop stage, 10 Day Observation, Yield, Signature & Date Lines: Farmer or Farmer's Rep, Sales rep.

Replicates: Minimum 3 replicates. Treatments should be randomly allocated within a replicate. If there is a gradient in the land (slope, moisture, nutrients, soil) please allocate the treatments in a Randomized Complete Block Design (RCBD).

Treatments: Make sure the products are applied at correct growth stage of the crop and follow the label instructions. Foliar Spraying is best done in the early morning.

  • Treatment 1 – Check: Regular Program farmer is currently practicing.
  • Treatment 2 – Foliar Nutrient Plot: Regular Program + Active AgriScience's Foliar Nutrient.
  • Treatment 3 – Foliar Nutrient + Tank Mix Partner: (if farmer is planning to apply Active AgriScience's foliar nutrient with an herbicide/fungicide/insecticide/other agrochemicals) Regular Program + Tank Mix Partner + Active AgriScience's Foliar Nutrient.

Please follow the Active AgriScience products' compatibility chart for chemical compatibility. If unsure, please do a small jar test before mixing.

Leave Guard Rows on either side of a replicate.

Mixing Rates: Follow label recommendations.

Mixing Sequence:

  1. Water.
  2. Agrochemical (herbicide/fungicide/insecticide/other agrochemical).
  3. Active AgriScience's Foliar Nutrient.

Mixing Instructions:

  1. Ensure the tank is absolutely clean with no residues present - especially if the sprayer has been previously used for spraying herbicides.
  2. Add half of the recommended water volume.
  3. Begin agitation.
  4. Add recommended dose of agrochemical if tank mixing with an agrochemical.
  5. Add your chosen Active AgriScience's Foliar Nutrient product.
  6. Add rest of the water.
  7. Continue agitating the mixture for 3-5 minutes before spraying.

Spray Instructions:

  1. Test the sprayer in an open area for proper spray droplets and make sure the emitters are working properly.
  2. Early morning is better for foliar sprays.
  3. Start spraying check first and then continue with rest of the treatments sequentially.
  4. If any other agrochemicals are applied to control pests and diseases, apply them equally on all replicates.
  5. Maintain agitation while spraying.

After Spraying:

  1. Record date and time on prepared chart.
  2. Record the chemical sprayed, lot numbers, spray rates.
  3. Record the stage of the crop.
  4. Properly place the signs with treatment applied in each replicate.
  5. Observe the trial around 10 days after the treatment application and make notes on how the crop is progressing, any visual differences, any pest and disease occurrences to be noticed.

Harvesting and Data Reporting:

  1. Inform the rep when planning to harvest. Presence of the Sales Rep is mandatory when harvesting.
  2. Harvest the middle two rows of each replicate of each treatment for yield assessment.
  3. Use a weigh wagon or any other accurate method of measuring the yield.
  4. Record the yield as bu/acre.
  5. Both the farmer/farmer's representative and the rep can witness the weigh numbers.

Photos

You may wish to take photos just before spraying, at the 10-day observation point and just prior to harvest to aid in analysis.

Please ensure the Sales Rep is able to get a copy of the chart.

Safety Data Sheet

SECTION 1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFIER

Active PODFILL 8-4-12

PRODUCT USE

Agricultural fertilizer

MANFACTURERS NAME

Active AgriScience Inc.

STREET ADDRESS

3422 Millar Avenue

CITY

Saskatoon

POSTAL CODE

S7K 5Y7

DATE

July 8, 2021

PROVINCE

Saskatchewan, Canada

EMERGENCY TELEPHONE

1-639-398-0485

PREPARED BY

Active AgriScience Inc.

USE RESTRICTIONS

For professional use only. Use only as labeled.

DISTRIBUTORS NAME

 

STREET ADDRESS

 

CITY

 

POSTAL CODE

 

COUNTRY

 

EMERGENCY TELEPHONE

 

SECTION 2 – HAZARDS IDENTIFICATION

GHS CLASSIFICATION

HPR (WHMIS 2015)

Reproductive toxicity: Category 1B

OSHA Hazard Communication Standard (29 CFR 1910.1200)

Reproductive toxicity: Category 1B

WHMIS Health Hazards

DANGER

HAZARD STATEMENTS: CONTAINS BORON: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

PRECAUTIONARY STATEMENTS: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, clothing, eye protection and face protection. If mists are present and ventilation is absent or poor, use an air purifying respirator. Do not eat, drink or smoke when using this product. Wash up thoroughly before eating, drinking, smoking and leaving work.

FIRST AID: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell. IF ON SKIN: Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell. IF IN EYES: Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists. STORAGE: KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE. DISPOSAL: Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#

CONCENTRATION

Borax

1330-43-4

10 – 30%

SECTION 4 – FIRST AID MEASURES

EYE CONTACT

Immediately flush eyes with a gentle stream of water for 15 minutes while holding the upper and lower eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persists.

SKIN CONTACT

Immediately take off all contaminated clothing. Rinse skin with water (or shower). Wash contaminated clothing before reuse. Seek medical attention if irritation persists.

INHALATION

Remove person to fresh air and keep comfortable for breathing. Seek medical attention if you feel unwell.

INGESTION

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

Most Important Symptoms, both acute & delayed

Contains Boron: May damage fertility or the unborn child.

SECTION 5 – FIRE FIGHTING MEASURES

FLAMMABLE

Product will not burn or support combustion.

MEANS OF EXTINCTION

Use extinguishing methods appropriate for the surrounding fire.

FLASHPOINT & METHOD

NAP

UPPER FLAMMABLE LIMIT

NAP

LOWER FLAMMABILITY LIMIT

NAP

AUTO IGNITION TEMPERATURE

NAP

SENSITIVITY TO IMPACT

NAP

SENSITIVITY TO STATIC DISCHARGE

NAP

HAZARDOUS COMBUSTION PRODUCTS

Toxic and / or irritating gases may be released during a fire.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

LEAK & SPILL PROCEDURES

Wear personal protective equipment outlined in SECTION 8. Ventilate area of spill. Avoid breathing mists. Contain spill then adsorb with inert material and place ­into suitable clean containers for later disposal. Do not release into drains or the environment.

SECTION 7 – HANDLING AND STORAGE

HANDLING

Do not handle until all safety precautions have been read and understood. Do not breathe mist/spray. Do not get in eyes, or skin. Wear personal protective equipment outlined in SECTION 8. Wash hands and other exposed areas before eating, drinking, smoking and when leaving work.

STORAGE

KEEP OUT OF REACH OF CHILDREN. Store locked up in a cool, dry, well ventilated area away from food or feed storage. DO NOT FREEZE.

SECTION 8 – EXPOSURE CONTROL / PERSONAL PROTECTION

EXPOSURE LIMITS

Not available.

ENGINEERING CONTROLS

Ensure adequate ventilation when handling or applying this product. Follow all label instructions. Follow manufacturers’ instructions for cleaning / maintaining personal protective equipment. If mists are present and ventilation is absent or poor, use an air purifying respirator.

PERSONAL PROTECTIVE EQUIPMENT

Skin

The use of protective gloves is recommended when handling or applying this product.

Eyes

The use of eye protection is recommended when handling or applying this product.

Respirator

If mists are present and ventilation is absent or poor, use an air purifying respirator when handling or applying this product.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

Liquid

COLOUR

Pale yellow

BOILING POINT

NAV

EVAPORATION RATE

NAV

ODOUR

NAV

SOLUBILITY IN WATER

Fully soluble

APPEARANCE

Pale yellow liquid

VISCOSITY

NAV

FREEZING POINT

NAV

SPECIFIC GRAVITY

1.3 – 1.35 g/cm3

pH

8.2 – 8.8

ODOUR THRESHHOLD

NAV

SECTION 10 – STABILITY AND REACTIVITY

CHEMICAL STABILITY

Stable under normal conditions of use and storage.

INCOMPATIBLE WITH OTHER SUBSTANCES

Not available.

HAZARDOUS DECOMPOSING PRODUCTS

Toxic and/or irritating gases may be released during a fire.

SECTION 11 – TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Acute Oral: Does not meet criteria.

Acute Dermal: Does not meet criteria.

CHRONIC TOXICITY

Based on the available information, product does not meet criteria for chronic toxicity.

EYE / SKIN IRRITATION

Not available.

SENSITIZATION

Not available.

CARCINOGENICITY

No component of this product present at levels ≥ 0.1% is identified as a probable, possible, or confirmed human carcinogen by IARC, or ACGIH.

REPRODUCTIVE TOXICITY

Boron exposure may damage fertility or the unborn child.

MUTAGENICITY

Not available.

SECTION 12 – ECOLOGICAL INFORMATION

ECOTOXICITY

Not available.

SECTION 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL

Dispose of this product and its container in accordance with Federal, Provincial, and Local regulations.

SECTION 14 – TRANSPORT INFORMATION

SHIPPING

TDG: Not a dangerous good for transport.

DOT: Not a dangerous good for transport.

SECTION 15 – REGULATORY INFORMATION

This SDS is prepared to comply with the Global Harmonized System of Chemical Classification and Labeling (GHS) and conforms to the requirements of HPR (WHMIS 2015) & OSHA Hazard Communication Standard (29 CFR 1910.1200).

SECTION 16 – OTHER INFORMATION

To the best of our knowledge, the information contained herein is current and correct as of the date of this SDS, however, the information and recommendations are presented without warranty, representation or license of any kind, with respect to their accuracy, or completeness, and the seller, supplier and manufacturer (Supplier) of this material or their affiliates, disclaim all liability for reliance on such information and recommendations.

Final determination of the suitability of any material is the sole responsibility of the buyer or the user (recipient). All materials may present unknown hazards and should be used with caution. The recipient assumes all risk in connection with the use of this material and assumes all responsibility for ensuring the material is used in a safe manner in compliance with applicable environmental, health and safety laws.

The supplier does not warrant the merchantability of this material or the fitness of the material for any particular use and assumes no responsibility for injury or damage caused directly or indirectly by the use of this material.

 

Compatibility

Compatible with most fungicides, herbicides, pesticides, and fertilizers. Please see Compatibility Chart and conduct pre-testing if combination has not been previously used. Always do a jar test with pesticides and spray water to ensure compatibility as water quality can vary.

ACTIVE PODFILL COMPATIBILITY WITH PESTICIDES
ACTIVE PODFILL COMPATIBILITY WITH FUNGICIDES
COMPATIBLE
Acapela
Bravo 500
Caramba
Delaro 325 SC
Dithane
Folicur 250 EC
Headline EC
Miravis Ace Bold
Priaxor
Proline 480 SC
Prosaro 250 EC
Quadris
Quilt
Rovral Flo
Tilt 250 E
Twinline
Vertisan
CAUTION
Allegro
Lance WDG
Manzate
Quash
INCOMPATIBLE
Astound
ACTIVE PODFILL COMPATIBILITY WITH INSECTICIDES
COMPATIBLE
Coragen
Decis
Diazanon
Lannate
Lorsban
Malathion 85E
Malathion 500
Matador
Pounce
Ripcord
Sevin XLR Plus
CAUTION
Furadan
Sevin XLR
ACTIVE PODFILL WITH TANK MIXTURES
COMPATIBLE TANK MIX #1
Agchem Odyssey Ultra Herbicide Mix: 308 ml / 40 ml water
Surfactant / Adjuvant Merge™ Adjuvant: 200ml / 40L water
Fertilizer ACTIVE PODFILL: 1L /40L water
Agchem Water 5 GPA
COMPATIBLE TANK MIX #2
Agchem Cotegra™ Fungicide: 0.24L / ac
Fertilizer ACTIVE PODFILL: 0.5 L / ac
Agchem Water 10 GPA
COMPATIBLE TANK MIX #3
Agchem AXIAL® XTREME Herbicide: 2.5ml / 100ml water
Fertilizer ACTIVE PODFILL: 1L /40L water
Agchem Water 5 GPA
COMPATIBLE TANK MIX #4
Agchem 1 Miravis Bold (SC): 0.4 L / acre
Agchem 2 Agral 90 (ADJ): 0.125% v/v
Fertilizer ACTIVE PODFILL (Lfert): 1L / acre
Carrier Rate 10 GPA
COMPATIBLE TANK MIX #5
Agchem Miravis Neo (SE): 0.5 L / acre
Fertilizer ACTIVE PODFILL (Lfert): 1L / acre
Carrier Rate 10 GPA
ACTIVE PODFILL WITH ACTIVE AGRISCIENCE PRODUCTS
COMPATIBLE
Active KONNECT
Proform N
Active BORON
Active COPPER
INCOMPATIBLE
Active PRIME
Active BUILD
Active COMPLETE
Active MANGANESE
Active ZINC

Related Products